Inconel 601 Flanges

Inconel 601 Flanges 2018-01-10T05:25:43+00:00

Inconel 601 Slip On Flanges, Inconel 601 Spectacle Blind Flanges, Alloy 601 Flanges, Inconel 601 Pipe Flanges, Alloy 601 Orifice Flange, ASME SB564 Alloy 601 Lap Joint Flange, Alloy 601 RTJ Flange Supplier in Mumbai, India.

Inconel UNS N06601 Pipe Flanges, Inconel 601 Nippo Flanges, ASTM B564 Inconel 601 Threaded Flanges, Inconel 601® WNRF Flanges Exporter, ANSI B16.5 Alloy 601 Blind Flanges, 601 Alloy Weld Neck Flange Dealer in India.

Inconel 601 Flanges

Ganpat Industrial Corporation offers a wide range of Inconel 601 Flanges, which has some great features such as fine finishing, corrosion resistant, easy to fit and more. Inconel 601 Slip On Raised Flanges (UNS N06601) are used in Radiant tubes, Strand annealing tubes, Steam super-heater tube supports, and more. Some of the great properties that draw users to Inconel 601 Threaded Flanges include: good aqueous corrosion resistance, outstanding mechanical strength, and more. Inconel 601 Weld Neck Raised Flanges is formed using all conventional techniques. For maximum oxidation resistance, Inconel 601 Blind Flanges should be welded with matching composition 601 alloy GTAW wire. Inconel 601 Socket Weld Flanges develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling. Inconel 601 Ring Joint Type Flanges is often used in thermal processing equipment – fixtures, baskets, trays, radiant tubes, flame shields, muffles, retorts, woven wire conveyers, electrical resistance heating wires and burner nozzles. Further important applications of Inconel 601 Spectacle Blind Flanges are to be found in the pollution control, aerospace – where it is used in jet-engine igniters – and power generation industries. Resistance to carburization of Inconel 601 Long Weld Neck Flanges is good, also resistant to carbon nitriding conditions. Inconel 601 Nippo Flanges is highly resistant to carburization, along with has metallurgical stability and good creep rupture strength. Meanwhile, these Inconel 601 Lap Joint Flanges are also being offered in different sizes and shapes to our customers.

Inconel DIN 2.4851 Socket Weld Flanges, Inconel 601 Nippolet Flanges, ANSI B16.5 Alloy 601 Ring Type Joint Flanges, Inconel 601 Industrial Flanges Stockholder, Inconel GOST XH60BT Screwed Flanges Stockist, Inconel 601 Spacer, 601 Alloy Forged Flanges Manufacturer.

601 Alloy Pipe Flanges

Inconel Flanges
601 Inconel WNRF Flanges
Inconel 601® Lapped joint Flanges
Inconel XH60BT Plate Flange

Inconel 601 Pipe Flanges Specifications
Specifications : ASTM B564 / ASME SB564
Size : 1/2″NB TO 60″NB
Standards
: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Class / Pressure : 150#, 300#, 601#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

 

Types of Inconel 601 Flanges

Inconel 601 Slip On Flanges Inconel 601 Slip On Flanges Inconel 601 Raised Face Slip On Flanges
601 Alloy Slip On Plate Flanges
Inconel 601 Slip On Flanges
Inconel UNS N06601 Slip On Flanges
Inconel WERKSTOFF NR. 2.4851 45 SORF Flanges
ASME SB564 Alloy 601 Slip On Flanges
Inconel 601 Weld Neck Flanges Inconel 601 Weld Neck Flanges Inconel 601 Raised Face Weld Neck Flanges
601 Alloy Weld Neck Flanges
601 Inconel Weld Neck Flange
Inconel UNS N06601 Weld Neck Flanges
Inconel WERKSTOFF NR. 2.4851 Weld Neck Flange
ASTM B564 Inconel 601 WNRF Flange
Inconel 601 Blind Flanges Inconel 601 Blind Flanges Inconel 601 Raised Face Blind Flanges
601 Alloy Blind Flanges
Inconel 601 Blind Flange
Inconel UNS N06601 Blind Flanges
Inconel WERKSTOFF NR. 2.4851 Blind Flange
ASTM B564 Inconel 601 BLRF Flanges
Inconel 601 Orifice Flanges Inconel 601 Orifice Flanges Alloy 601 Orifice Flanges
601 Inconel Orifice Flanges
601 Inconel Orifice Flanges
Inconel UNS N06601 Orifice Flanges
Inconel WERKSTOFF NR. 2.4851 Orifice Flanges
B564 601 Inconel Orifice Flanges
Inconel 601 Socket weld Flanges Inconel 601 Socket weld Flanges Alloy 601 Socket weld Flanges
601 Inconel Socket weld Flanges
601 Alloy Socket weld Flanges
Inconel UNS N06601 Socket weld Flanges
Inconel WERKSTOFF NR. 2.4851 SWRF Flanges
ASME B16.5 601 Inconel Socket weld Flanges
Inconel 601 Threaded Flanges Inconel 601 Threaded Flanges Inconel 601 Threaded Flanges
601 Alloy Threaded Flanges
601 Inconel Threaded Flanges
Inconel UNS N06601 Threaded Flanges
Inconel WERKSTOFF NR. 2.4851 Threaded Flanges
ASTM B564 Inconel 601 Threaded Flanges
Inconel 601 Long weld Neck Flanges Inconel 601 Long weld Neck Flanges Inconel 601 Long weld Neck Flanges
601 Alloy Long weld Neck Flanges
601 Inconel Long weld Neck Flanges
Inconel UNS N06601 Long weld Neck Flanges
Inconel WERKSTOFF NR. 2.4851 Long weld Neck Flanges
ASTM B564 Inconel 601 Long weld Neck Flanges
Inconel 601 RTJ Flanges Inconel 601 RTJ Flanges Inconel 601 Ring Type Joint Flanges
601 Alloy Ring Type Joint Flange
601 Inconel RTJ Flanges
Inconel UNS N06601 RTJ Flanges
Inconel WERKSTOFF NR. 2.4851 RTJ Flanges
BS4504 Inconel 601 RTJ Flanges
Inconel 601 Reducing Flanges Inconel 601 Reducing Flanges Inconel 601 Reducing Flanges
601 Alloy Reducing Flanges
601 Inconel Reducing Flange
Inconel UNS N06601 Reducing Flanges
Inconel WERKSTOFF NR. 2.4851 Reducing Flange
ASTM B564 Inconel 601 Reducing Flanges
Inconel 601 Forged Flanges Inconel 601 Forged Flanges Inconel 601 Forged Flanges
601 Alloy Forged Flange
601 Inconel Forged Flange
Inconel UNS N06601 Forged Flanges
Inconel WERKSTOFF NR. 2.4851 Forged Flanges
ASTM B564 Inconel 601 Forged Flanges

 

Inconel Alloy 601 Pipe Flanges Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 601 0.10 max 1.00 max 0.50 max 0.015max 1.00 max Balance 58.0 – 63.0 21.0 – 25.0

Inconel 601 Plate Flanges Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 601 Inconel Industrial Pipe Flanges

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe

Inconel 601 Flanges Price List

  • 601 Inconel Flanges
    US $1.8-159 / Piece (FOB Price)
  • Alloy 601 Pipe Flanges
    US $1500-1601 / Ton (FOB Price)
  • Inconel 601 Weld Neck Flanges
    US $100-2500 / Ton (FOB Price)
  • ASTM B564 Inconel Alloy 601 plate flanges
    US $1-500 / Ton (FOB Price)
  • 601 Alloy Pipe Flanges
    US $999-1499 / Ton (FOB Price)

Alloy 601 Flanges Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Inconel 601 Pipe Flanges Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME Inconel 601 Flanges Value Added Services

Material Testing:
We at Ganpat Industrial Corporation ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Inconel 601 Pipe Flanges Packaging

Inconel 601 Flanges Packing 601 Inconel Alloy Flanges Packaging Inconel 601 Flanges are widely used in various industries including petrochemical, oil and gas, power generation, bulk liquid transportation, chemicals, pharmaceuticals, pulp and paper manufacturing, textiles and others. All our Alloy 601 Flange are manufactured in accordance with international standards. Inconel 601 Pipe Flange are packaged to ensure that there is no damage during transit. In case of exports, standard export packaging is done in wooden cases. All Inconel 601 Plate Flanges are marked with Grade, Lot No, Size, Degree and our trade mark. On special requests we can also, make custom marking on 601 Inconel Flanges.

Alloy 601 Flanges Manufacturer Popular Searches

inconel flanges, inconel 601 flange, inconel 601 blind plate flanges, alloy 601 raised face blind flanges, 601 alloy lap joint flanges, inconel 601 slip on plate flanges, alloy 601 raised face socket weld flanges, alloy 601 raised face threaded flanges, 601 inconel raised face weld neck flanges, 601 inconel raised face slip-on flanges, alloy 601 industrial pipe flanges, inconel 601 flanges specifications, alloy 601 flange price list, inconel 601 threaded pipe flange, inconel 601 flange price, inconel 601 flange dimensions, inconel 601 pn16 flange dimensions, alloy 601 flange class 150, inconel alloy 601 flanges dimensions, alloy 601 flanges manufacturer.

Inconel 601 Pipe Flanges Supplier

New Delhi, Gurgaon, Dubai, Busan, Edmonton, Houston, Ernakulam, Muscat, Thiruvananthapuram, Los Angeles, Karachi, Aberdeen, Baroda, Bhopal, Geoje-si, New York, Sydney, Doha, Kuala Lumpur, Nagpur, Montreal, Perth, Port-of-Spain, Bogota, Lagos, Santiago, Visakhapatnam, Tehran, Mexico City, Ankara, Hong Kong, Rio de Janeiro, Istanbul, La Victoria, Singapore, Brisbane, Bengaluru, Kolkata, Ludhiana, Milan, Madrid, Jamshedpur, Thane, Navi Mumbai, Atyrau, Granada, Manama, Surat, Howrah, Abu Dhabi, Dallas, Gimhae-si, Ahvaz, London, Bangkok, Hyderabad, Algiers, Pimpri-Chinchwad, Coimbatore, Moscow, Kanpur, Kuwait City, Rajkot, Jakarta, Chennai, Cairo, Dammam, Calgary, Pune, Al Jubail, Haryana, Ahmedabad, Vadodara, Jeddah, Caracas, Jaipur, Toronto, Lahore, Indore, Colombo, Secunderabad, Ranchi, Petaling Jaya, Chandigarh, Ulsan, Sharjah, Al Khobar, Mumbai, Melbourne, Vung Tau, Riyadh, Seoul, Chiyoda, Noida, Faridabad, Hanoi, Courbevoie, Nashik, Ho Chi Minh City

Inconel Alloy 601 Plate Flanges Exporter

Ukraine, Spain, New Zealand, Iran, Lithuania, Mexico, Switzerland, Singapore, Mexico, Czech Republic, Italy, Costa Rica, Ghana, Malaysia, Portugal, Qatar, Bangladesh, Ecuador, Nepal, Gambia, Argentina, Austria, Chile, Bulgaria, Philippines, Belarus, Nigeria, Taiwan, Australia, Chile, Kuwait, Libya, Iraq, Estonia, Romania, Hong Kong, Greece, Bahrain, Zimbabwe, Tibet, Vietnam, Denmark, Poland, Turkey, Slovakia, Venezuela, Hungary, Lebanon, Jordan, United States, Saudi Arabia, Germany, Morocco, Colombia, Bolivia, France, Indonesia, Canada, Brazil, Kazakhstan, United Arab Emirates, Trinidad & Tobago,Tunisia, Israel, Angola, Peru, Russia, Ireland, Thailand, Belgium, Yemen, Finland, Nigeria, Poland, Algeria, Sweden, Iran, South Korea, Macau, Croatia, South Africa, Azerbaijan, Namibia, Bhutan, Egypt, Norway, Kenya, Japan, Oman, Puerto Rico, Gabon, United Kingdom, Pakistan, Netherlands, Afghanistan, China, Serbia, Mongolia, India, Sri Lanka