Stainless Steel 317 Buttweld Fittings

Stainless Steel 317 Buttweld Fittings 2018-01-09T11:15:52+00:00

SS 3d Pipe Bend, SS WP317 45 degree Elbow, 317 SS Short Radius Elbow, ASTM A403 SS 317 Stainless, ASTM A403 Stainless Steel 317L Welded Buttweld Fittings Radius Elbow Supplier in Mumbai, India.

ASME SA403 SS 317 Long Stub, SS WP317 Pipe Elbow, SS 1.5d Pipe Bend, SS 317L Pipe Reducer Supplier, SS WERKSTOFF NR.1.4449 Cross Exporter in India.

Stainless Steel 317 Buttweld Fitting

Ganpat Industrial Corporation is one of the prominent distributor and seller of high quality SS 317 Butt Weld Pipe Fittings, which has excellent general corrosion resistance and is superior in most environments. Stainless Steel 317 Elbow Butt Weld Pipe Fittings has excellent resistance to localised corrosion including inter – granular, pitting and crevice corrosion, where the CPT is generally at least 35 Degree C. Stainless Steel 317 Reducer is also resistant to chloride stress corrosion cracking (SCC) at temperatures of up to about 150 Degree C. Stainless Steel 317 Tee Butt Weld Pipe Fittings will often perform well in environments which cause premature failure of austenitic grades. Stainless Steel 317 Cross Butt Weld Pipe Fittings has better resistance to sea water than grade 316. Although stainless steel has good high temperature oxidation resistance, Stainless Steel 317 Bend Butt Weld Pipe Fittings suffer from embrittlement if held for even short times at temperatures above 270 Degree C. If embrittled, Stainless Steel 317 Stub End can only be rectified by a full solution annealing treatment. Because of its high strength, Stainless Steel 317 End Cap performs well in abrasion/corrosion conditions. A PRE guaranteed to be at least 40 indicates that Stainless Steel 317 Dish Cap Butt Weld Pipe Fittings has good pitting and crevice corrosion resistance to warm sea water and other high chloride environments.

SS U Pipe Bend, Stainless Steel UNS S31700 Seamless Pipe Fittings, SS 317 End Pipe Cap, Stainless Steel 317 180 Deg bend, Stainless Steel 317 U bend Supplier in India.

Stainless Steel 317 Pipe Fitting

Stainless Steel SS 317 Lateral Tee
SS 317 Stainless Steel Long Stub End
Stainless Steel SS 317 Long & Short Radius Elbow
SS 317 45 degree Elbow 

Stainless Steel 317 Pipe Fittings Specifications
Specifications : ASTM A403 / ASME SA403
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Standards
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

 

Types of Stainless Steel 317 Buttweld Fittings

Stainless Steel 317 45degree Elbow Stainless Steel 317 45 Degree Elbow SS 317 45 Degree Elbow
SS 317 SS 90 Degree Elbow
SS 317 Stainless Steel 45 Degree Elbow
SS UNS S31700 45 Degree Elbow SS S31009 Degree Elbow
ASME SA403 WERKSTOFF NR.1.4449 90 Degree Elbow
SS 317 Pipe Fittings Stainless Steel 317 Pipe Fittings SS 317 Pipe Fittings
317 SS Buttweld Fitting
317 Stainless Steel Pipe Fitting
SS UNS S31700 Buttweld Fitting
SS WERKSTOFF NR.1.4449 Pipe Fittings
ASTM A 1.4306 / 1.4307 Stainless Steel Buttweld Fitting
SS 317 Ecentric Reducer Stainless Steel 317 Eccentric Reducer SS  317 Eccentric Reducer
317 SS Eccentric Reducer
317 Stainless Steel Eccentric Reducer
SS UNS S31700 Eccentric Reducer
ASTM A403 WP WERKSTOFF NR.1.4449 Stainless Steel Eccentric Reducer
SS 317 Concentric Reducer Stainless Steel 317 Concentric Reducer SS 317 Concentric Reducer
317 SS Concentric Reducer
317 Stainless Steel Concentric  Reducer
SS UNS S31700 Concentric Reducer
ANSI B16.9 WP WERKSTOFF NR.1.4449 Stainless Steel Concentric Reducer
SS 317 Lateral Tee Stainless Steel 317 Lateral Tee 317 Lateral Tee
317 SS Lateral Tee
317 Stainless Steel Lateral Tee
SS UNS S31700 Lateral Tee
SS S31700 Lateral Tee
ASME B16.28 WP 304L Stainless Steel Lateral Tee
SS 317 Equal Tee Stainless Steel 317 Equal Tee SS 317 Equal Tee
317 SS Equal Tee
317 Stainless Steel Equal Tee
SS UNS S31700 Lateral Tee
317 SS Lateral Tee
317 Stainless Steel Lateral Tee
SS UNS S31009 Lateral Tee
SS S31700 Lateral Tee
ASME B16.28 WP 304L Stainless Steel Lateral Tee Equal Tee
SS WERKSTOFF NR.1.4449 Equal Tee
ASTM A403 Stainless Steel Equal Tee
SS 317 Long Stub End Stainless Steel 317 Long Stub End SS 317 Long Stub End
317 SS Long Stub End
317 Stainless Steel Long Stub End
SS UNS S31700 Long Stub End
SS S31009 Long Stub End
ASTM A403 WP 316/316L Stainless Steel Long Stub End
SS 317 Short Stub End Stainless Steel 317 Short Stub End SS 317 Short Stub End
317 SS Short Stub End
317 Stainless Steel Short Stub End
SS UNS S31700 Short Stub End
SS S31009 Short Stub End
MSS-SP-43 Stainless Steel Short Stub End
SS 317 End Cap Stainless Steel 317 End Cap SS 317 End Cap
317 SS End Cap 317 Stainless Steel End Cap
SS UNS S31700 End Cap
WERKSTOFF NR.1.4449 End Cap
ASTM A403 316/316L Stainless Steel End Cap
SS 317 Bend Stainless Steel 317 Bend SS 317 Bend
317 SS Bend
SS 5d Pipe Bend
317 Stainless Steel Bend
SS UNS S31700 Bend
WERKSTOFF NR.1.4449 Bend
ASTM A403 Stainless Steel Bend
SS 317 Equal Cross Stainless Steel 317 Equal Cross SS 317 Equal Cross
317 SS Equal Cross
317 Stainless Steel Equal Cross
SS UNS S31700 Equal Cross
WERKSTOFF NR.1.4449 Equal Cross
ANSI B16.9 WP WERKSTOFF NR.1.4449 Stainless Steel Equal Cross

 

SS 317 Pipe Fittings Chemical Composition

Grade C Ni Mn P S Cr Si Mo Fe
317 0.08 max 11.00 – 15.00 2 max 0.045 max 0.030 max 18.00 – 20.00 1 max 3.00 – 4.00 57.845 min

 

Stainless Steel 317 Butt weld Fittings Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

 

Equivalent Grades for 317 Stainless Steel Pipe Fitting

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
317  1.4449 S31700     SUS 317      –             –                –           –

 

Stainless Steel 317 Pipe Fittings Price List

  • 317 Buttweld Fittings
    US $1-5 / Piece (FOB Price)
  • SS 317 Pipe Fitting
    US $0.07 / Piece
  • Stainless Steel Buttweld Fitting
    US $0.01-3 / Piece (FOB Price)
  • ASTM A403 317 stainless steel Buttweld Fitting
    US $0.1-0.2 / Piece (FOB Price)
  • 317 Pipe Fittings
    US $1-5 / Piece (FOB Price)

SS WERKSTOFF NR.1.4449 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 317 Buttweld Fitting Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME  SS 317 Buttweld Pipe Fittings Value Added Services

Material Testing:
We at Ganpat Industrial Corporation ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 317 Pipe Fittings Packaging

Stainless Steel 317 Pipe Fittings Packing SS 317 Pipe Fittings Packaging Stainless Steel 317 Buttweld Fitting are individually wrapped by hand to ensure that the high quality of the material is maintained and no damage in the last stages of production. We recommend Plywood cases or pallet packaging to ensure safe packaging and prompt delivery of the ordered consignment. Stainless Steel 317 Buttweld Fitting come with imprints relevant to the job information (eg, heat number, size, material and part number). This information is also printed along all delivered Industrial Buttweld Fittings.

SS 317 Pipe Fittings Manufacturer Popular Searches

ss 317 pipe fittings catalogue, ss 317 pipe fittings price list, ss 317 pipe fittings manufacturer, 317 pipe fittings suppliers, ss 317 fittings catalog, ss 317 fittings manufacturer, stainless steel 317 pipe fittings manufacturers in india, 317 stainless steel fittings manufacturers in india

Stainless Steel 317 Pipe Fittings Supplier

Jamshedpur, Surat, Bogota, Rajkot, Hong Kong, Ernakulam, Al Jubail, Melbourne, Pune, Busan, Calgary, Chandigarh, Noida, Lahore, Kuwait City, Mumbai, Dubai, Sharjah, Jeddah, Thane, Howrah, Port-of-Spain, Ludhiana, Petaling Jaya, Granada, Bengaluru, Montreal, Chiyoda, Seoul, Dammam, Aberdeen, Manama, Indore, Karachi, Tehran, Madrid, Ahmedabad, Bangkok, Gimhae-si, Doha, Kolkata, Secunderabad, Jakarta, Istanbul, Abu Dhabi, Atyrau, Rio de Janeiro, Haryana, Thiruvananthapuram, Milan, Los Angeles, New York, Caracas, Cairo, Baroda, Hyderabad, Geoje-si, Kuala Lumpur, Brisbane, Muscat, Edmonton, La Victoria, Mexico City, Courbevoie, Santiago, Toronto, Lagos, Coimbatore, Dallas, Sydney, Nagpur, Riyadh, Ranchi, Houston, Hanoi, Algiers, Ankara, Ulsan, Moscow, Navi Mumbai, Al Khobar, Jaipur, Vung Tau, Visakhapatnam, Gurgaon, Singapore, Bhopal, Faridabad, New Delhi, Kanpur, Ho Chi Minh City, Pimpri-Chinchwad, Chennai, London, Colombo, Vadodara, Perth, Nashik, Ahvaz.

Stainless Steel 317 Buttweld Fittings Exporter

Bulgaria, Qatar, Morocco, Sweden, Mexico, Chile, Saudi Arabia, Peru, Egypt, Finland, Libya, Mongolia, Costa Rica, Canada, Kenya, Romania, Kazakhstan, Russia, Hong Kong, India, Israel, Vietnam, Pakistan, Austria, Indonesia, Greece, Lithuania, Malaysia, Estonia, Norway, Thailand, Kuwait, Netherlands, Portugal, Iraq, Gambia, Sri Lanka, France, Philippines, Hungary, Iran, Venezuela, Serbia, United Kingdom, Puerto Rico, Trinidad & Tobago,Tunisia, South Korea, Singapore, Namibia, Denmark, Zimbabwe, Germany, Mexico, Ukraine, Croatia, Italy, Gabon, Slovakia, South Africa, United Arab Emirates, Argentina, Turkey, New Zealand, Switzerland, Iran, Ecuador, Azerbaijan, Spain, Nepal, Oman, Lebanon, Belarus, Algeria, Jordan, Ghana, Bangladesh, Ireland, Bhutan, Chile, Bolivia, Angola, Bahrain, Nigeria, Belgium, Yemen, Colombia, Nigeria, Poland, Tibet, Macau, Czech Republic, United States, Australia, Taiwan, China, Brazil, Japan, Poland, Afghanistan.