Stainless Steel 410 Flanges

Stainless Steel 410 Flanges 2018-01-10T05:07:43+00:00

SS 410 Slip On Flanges, Stainless Steel 410 RTJ Flange, SS 410 Nippo Flanges, Stainless Steel 410 Pipe Flanges, SS UNS S41000 Pipe Flanges, ANSI B16.5 SS 410 Orifice Flange Supplier in Mumbai, India.

ASME SA182 SS 410 Lap Joint Flange, SS 410 Blind Flanges, SS DIN 1.4006 Socket Weld Flanges, 410 SS WNRF Flanges Exporter, ASTM A182 SS F410 Threaded Flanges, SS 410 Spacer, SS 410 Weld Neck Flange Dealer in India.

Stainless Steel 410 Flanges

Ganpat Industrial Corporation is one of the well-established whole seller and stockiest of SS 410 Flanges, where better finishes are obtained in the cold drawn or heat – treated condition. In its softest condition, these Stainless Steel 410 Slip On Flanges is tough and chips build up on tools. If higher mechanical properties are required, our Stainless Steel 410 Threaded Flanges can be machined. Our Stainless Steel 410 Weld Neck Flanges are low carbon steels built around the composition of iron, 12 % chromium, and 0.12 % carbon. These Stainless Steel 410 Blind Flanges provides good corrosion resistance to air, water and some chemicals, where resistance to food acids is good. Our Stainless Steel UNS S41000 Socket Weld Flanges shows satisfactory resistance to nitric acid, concentrated sulphuric acid, dilute acetic acid and naphtha. These Stainless Steel 410 Lap Joint Flanges has extensive use in aircraft parts, such as exhaust systems where operating temperatures are higher than 800 Degree F and where corrosive conditions are not too severe; also for the reason that of its resistance to scaling and vibration fatigue. Our Stainless Steel 410 Ring Joint Type Flanges may be tempered and hardened, which gives steel great hardness, but also reduces its toughness and makes it brittle, so few steels are fully hardened. These Stainless Steel 410 Spectacle Blind Flanges may be satisfactorily welded, where maximum stabilization is accomplished by annealing between 1750 Degree F and 1850 Degree F.

ANSI B16.5 SS F410 Ring Type Joint Flanges, 150# ANSI SS 410 Flanges, Stainless Steel F410 Industrial Flanges Stockholder, Stainless Steel 410 Nippolet Flanges, SS 410 Screwed Flanges Stockist, SS Grade F410 Forged Flanges Manufacturer.

410 SS Pipe Flanges

Stainless Steel 410 Flanges
410 Stainless Steel WNRF Flanges
Stainless Steel 410 Lapped joint Flanges
SS 410 Plate Flange

Stainless Steel 410 Pipe Flanges Specifications
Specifications : ASTM A182 / ASME SA182
Size : 1/2″ (15 NB) to 48″ (1200NB)
Standards
: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

 

Types of Stainless Steel 410 Flanges

Stainless Steel 410 Slip On Flanges Stainless Steel 410 Slip On Flanges SS 410 Raised Face Slip On Flanges
410 SS Slip On Plate Flanges
410 Stainless Steel Slip On Flanges
SS UNS S41000 Slip On Flanges
SS WERKSTOFF NR. 1.4006 45 SORF Flanges
ASME SA182 410 Slip On Flanges
SS 410 Weld Neck Flanges Stainless Steel 410 Weld Neck Flanges SS 410 Raised Face Weld Neck Flanges
410 SS Weld Neck Flanges
410 Stainless Steel Weld Neck Flange
SS UNS S41000 Weld Neck Flanges
SS WERKSTOFF NR. 1.4006 Weld Neck Flange
ASTM A182 410 Stainless Steel WNRF Flange
SS 410 Blind Flanges Stainless Steel 410 Blind Flanges SS 410 Raised Face Blind Flanges
410 SS Blind Flanges
410 Stainless Steel Blind Flange
SS UNS S41000 Blind Flanges
SS WERKSTOFF NR. 1.4006 Blind Flange
ASTM A182 410 Stainless Steel BLRF Flanges
SS 410 Orifice Flanges Stainless Steel 410 Orifice Flanges SS 410 Orifice Flanges
410 SS Orifice Flanges
410 Stainless Steel Orifice Flanges
SS UNS S41000 Orifice Flanges
SS WERKSTOFF NR. 1.4006 Orifice Flanges
A182 410 Stainless Steel Orifice Flanges
SS 410 Socket weld Flanges Stainless Steel 410 Socket weld Flanges SS 410 Socket weld Flanges
410 SS Socket weld Flanges
410 Stainless Steel Socket weld Flanges
SS UNS S41000 Socket weld Flanges
SS WERKSTOFF NR. 1.4006 SWRF Flanges
ASME B16.5 410 Stainless Steel Socket weld Flanges
SS 410 Threaded Flanges Stainless Steel 410 Threaded Flanges SS 410 Threaded Flanges
410 SS Threaded Flanges
410 Stainless Steel Threaded Flanges
SS UNS S41000 Threaded Flanges
SS WERKSTOFF NR. 1.4006 Threaded Flanges
ASTM A182 Stainless Steel 410 Threaded Flanges
SS 410 Long weld Neck Flanges Stainless Steel 410 Long weld Neck Flanges SS 410 Long weld Neck Flanges
410 SS Long weld Neck Flanges
410 Stainless Steel Long weld Neck Flanges
SS UNS S41000 Long weld Neck Flanges
SS WERKSTOFF NR. 1.4006 Long weld Neck Flanges
ASTM A182 410 Stainless Steel Long weld Neck Flanges
SS 410 RTJ Flanges Stainless Steel 410 RTJ Flanges SS 410 Ring Type Joint Flanges
410 SS Ring Type Joint Flange
410 Stainless Steel RTJ Flanges
SS UNS S41000 RTJ Flanges
SS WERKSTOFF NR. 1.4006 RTJ Flanges
BS4504 Stainless Steel 410 RTJ Flanges
SS 410 Reducing Flanges Stainless Steel 410 Reducing Flanges SS 410 Reducing Flanges
410 SS Reducing Flanges
410 Stainless Steel Reducing Flange
SS UNS S41000 Reducing Flanges
SS WERKSTOFF NR. 1.4006 Reducing Flange
ASTM A182 Stainless Steel 410 Reducing Flanges
SS 410 Forged Flanges Stainless Steel 410 Forged Flanges SS 410 Forged Flanges
410 SS Forged Flange
410 Stainless Steel Forged Flange
SS UNS S41000 Forged Flanges
SS WERKSTOFF NR. 1.4006 Forged Flanges
ASTM A182 Stainless Steel 410 Forged Flanges

 

SS 410 Pipe Flanges Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 410 0.15 max 1.0 max 1.0 max 0.040 max 0.030 max 11.5 – 13.5 0.50 max

Stainless Steel 410 Plate Flanges Mechanical Properties

Grade Tensile Strength ksi (MPa) min Yield Strength 0.2% offset ksi (MPa) min Elongation (% in 50mm) min Hardness (Brinell) MAX Hardness (Rockwell B) MAX
410 65 (450) 30 (205) 20 217 96

Equivalent Grades for 410 Stainless Steel Industrial Pipe Flanges

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 410 1.4006 S41000 SUS 410 410S21 X12Cr13

Stainless Steel 410 Flanges Price List

  • 410 Flanges
    US $0.5-1000 / Piece (FOB Price)
  • SS 410 Pipe Flanges
    US $300-500 / Ton (FOB Price)
  • Stainless Steel 410 Weld Neck Flanges
    US $1-900 / Piece (FOB Price)
  • ASTM A182 410 stainless steel plate flanges
    US $0.5-1000 / Piece (FOB Price)
  • 410 Pipe Flanges
    US $1-300 / Piece (FOB Price)

SS 410 Flanges Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 410 Pipe Flanges Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME SS 410 Flanges Value Added Services

Material Testing:
We at Ganpat Industrial Corporation ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 410 Pipe Flanges Packaging

Stainless Steel 410 Flanges Packing 410 SS Flanges Packaging Stainless Steel 410 Flanges are widely used in various industries including petrochemical, oil and gas, power generation, bulk liquid transportation, chemicals, pharmaceuticals, pulp and paper manufacturing, textiles and others. All our SS 410 Flange are manufactured in accordance with international standards. Stainless Steel 410 Pipe Flange are packaged to ensure that there is no damage during transit. In case of exports, standard export packaging is done in wooden cases. All Stainless Steel 410 Plate Flanges are marked with Grade, Lot No, Size, Degree and our trade mark. On special requests we can also, make custom marking on 410 Stainless Steel Flanges.

SS 410 Flanges Manufacturer Popular Searches

ss 410 industrial pipe flanges, ss flanges specifications, ss 410 flange price list, stainless steel 410 threaded pipe flange, ss 410 flange price, stainless steel 410 flange dimensions, stainless steel 410 blind plate flanges, stainless 410 raised face blind flanges, 410 stainless lap joint flanges, stainless steel 410 slip on plate flanges, 410 raised face socket weld flanges, ss 410 raised face threaded flanges, 410 ss raised face weld neck flanges, 410 ss raised face slip-on flanges, stainless steel pn16 flange dimensions, ss 410 flange class 150, ss 410 flanges dimensions, ss 410 flanges manufacturer.

Stainless Steel 410 Pipe Flanges Supplier

Jaipur, Sharjah, Madrid, Jeddah, Seoul, La Victoria, Rio de Janeiro, Toronto, Montreal, Visakhapatnam, Hanoi, Kolkata, Jakarta, Secunderabad, Gurgaon, Granada, Doha, Singapore, Lagos, Bengaluru, Bogota, Vadodara, Edmonton, Dammam, Chennai, Santiago, Geoje-si, Moscow, Pimpri-Chinchwad, Courbevoie, Tehran, Ho Chi Minh City, Hyderabad, Faridabad, Houston, Ulsan, Gimhae-si, Vung Tau, Hong Kong, New Delhi, Nashik, Thane, Manama, Lahore, Al Khobar, Kanpur, Haryana, Navi Mumbai, Ankara, Ranchi, Ernakulam, Pune, Perth, Milan, Dubai, London, Baroda, Chandigarh, Noida, Kuala Lumpur, Nagpur, Busan, Petaling Jaya, Bangkok, Chiyoda, Colombo, Jamshedpur, Mexico City, Melbourne, Calgary, Rajkot, Aberdeen, Bhopal, Brisbane, Algiers, Los Angeles, Al Jubail, Port-of-Spain, Mumbai, Abu Dhabi, Surat, Ahvaz, Istanbul, Dallas, Caracas, Ludhiana, Kuwait City, Riyadh, Muscat, Karachi, Indore, Cairo, Sydney, Coimbatore, Ahmedabad, New York, Atyrau, Thiruvananthapuram, Howrah

Stainless Steel 410 Plate Flanges Exporter

Serbia, Sweden, Libya, Portugal, Austria, Italy, Chile, Afghanistan, South Korea, Peru, Philippines, Russia, Mongolia, Gabon, Belarus, Poland, Germany, Zimbabwe, Kenya, Macau, Finland, France, Colombia, Singapore, India, Lithuania, Taiwan, Indonesia, Estonia, Nigeria, Bangladesh, Angola, Hungary, Ireland, Norway, Egypt, Hong Kong, Spain, Belgium, Denmark, Tibet, Sri Lanka, Bahrain, Bolivia, Ghana, Slovakia, Oman, Brazil, United Kingdom, Gambia, Iran, Bhutan, Australia, Malaysia, Vietnam, Nepal, Azerbaijan, South Africa, Argentina, Mexico, Kuwait, Mexico, Iraq, Yemen, Netherlands, Morocco, Namibia, China, Canada, Venezuela, Puerto Rico, Greece, United Arab Emirates, Lebanon, Costa Rica, Algeria, Iran, Israel, Czech Republic, Poland, Trinidad & Tobago,Tunisia, Ukraine, Thailand, Turkey, Romania, Switzerland, Qatar, United States, Jordan, Kazakhstan, Croatia, Saudi Arabia, Chile, Bulgaria, New Zealand, Nigeria, Pakistan, Japan, Ecuador