Stainless Steel 410 Threaded Fitting, SS 410 Threaded Fittings, SS 410 Threaded Pipe Elbow, 410 Stainless Steel Forged Threaded 90deg. Elbow, SS UNS S41000 Threaded Bushing, Stainless Steel 410 Threaded Cap, SS 410 Screwed Fittings Supplier in Mumbai, India.

SS WERKSTOFF NR. 1.4006 Threaded Cross, SS 410 Lateral Tee, Stainless Steel 410 Threaded Forged Fittings, ASTM A182 Stainless Steel 410 Threaded Elbow, SS 410 Hex Plug, SS 410 Threaded Plug, 410 SS Full Couplings Exporter in India.

SS 410 Threaded Forged Fittings

Ganpat Industrial Corporation is one of the well-known exporting house and dealer of Stainless Steel 410 Forged Threaded Fittings, which display good resistance to scaling in continuous service up to 650 Degree C. Small sections of Stainless Steel 410 Forged Threaded Elbow can be air cooled and larger sections oil quenched for maximum through hardness. Pre hardened and tempered Stainless Steel 410 Forged Threaded Tee will also respond readily to nitriding achieving a typical surface hardness. The nitriding process of Stainless Steel 410 Forged Threaded Cross however reduces the corrosion resistance and is therefore not generally recommended except for critical applications where the benefit outweighs all other considerations. Stainless Steel 410 Forged Threaded Cap is used for parts requiring a combination of good strength and toughness, plus reasonable corrosion resistance. Use of Stainless Steel 410 Forged Threaded Fittings at higher working temperatures results in a substantial drop in tensile strength and hardness with subsequent increase in ductility. Stainless Steel 410 Forged Threaded Coupling is not recommended for use at sub – zero temperatures due to a substantial drop in impact properties consistent with most steels other than the austenitic steel types. In the hardened and tempered as supplied condition, Stainless Steel 410 Forged Threaded Union will be more difficult due to the high yield strength which must be taken into account.

Stainless Steel 410 Threaded Union Dealer, ANSI B16.11 SS 410 Threaded Street Elbows, Stainless Steel 410 High Pressure Forged Fittings, Stainless Steel 410 Hexagonal Plug, ASME SA182M SS 410 Class 6000 Threaded Fittings, 410 SS Pipe Nipple Stockholder.

SS 410 Forged Threaded Fittings

 

Stainless Steel 410 Threaded Forged Fittings
410 Stainless Steel 45 deg Threaded Elbow
Stainless Steel 410 Threaded Tee
SS 410 Threaded Cross
SS 410 Threaded Cap
Stainless Steel 410  45 degree Threaded Elbow

 

Stainless Steel 410 Forged Threaded Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socketweld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

 

Types of SS 410 Threaded Forged Fittings

SS 410 Threaded Elbow Stainless Steel 410 Threaded Elbow SS 410 45 Degree Threaded Elbow
410 SS 90 Degree Forged Threaded Elbow
410 Stainless Steel 45 Degree Forged Elbow
SS UNS S41000 45 Degree Forged Elbow
SS WERKSTOFF NR. 1.4006 45 Degree Elbow
ASME SA182 410 90 Degree Forged Threaded Elbow
Stainless Steel 410 Threaded Tee Stainless Steel 410 Threaded Tee SS 410 Threaded Tee
410 SS Forged Tee
410 Stainless Steel Forged Threaded Tee
SS UNS S41000 Threaded Tee
SS WERKSTOFF NR. 1.4006 Forged Tee
ASTM A182 Stainless Steel 410 Threaded Tee
SS 410 Threaded Cross Stainless Steel 410 Threaded Cross SS 410 Threaded Cross
410 SS Forged Threaded Cross
410 Stainless Steel Threaded Cross
SS UNS S41000 Forged Threaded Cross
SS WERKSTOFF NR. 1.4006 Threaded Cross
ASTM A182 410 Stainless Steel Threaded Cross
SS 410 Threaded Cap Stainless Steel 410 Threaded Cap SS 410 Threaded Cap
410 SS Forged Threaded Cap
410 Stainless Steel Threaded Cap
SS UNS S41000 Forged Threaded Cap
SS WERKSTOFF NR. 1.4006 Threaded Cap
ASME SA182 410 Stainless Steel Forged Threaded Cap
SS 410 Threaded Coupling Stainless Steel 410 Threaded Coupling SS 410 Threaded Coupling
410 SS Threaded Coupling
Stainless Steel 410 Threaded Coupling
SS UNS S41000 Threaded Coupling
SS WERKSTOFF NR. 1.4006 Threaded Coupling
ASME 16.11 410 Stainless Steel Threaded Coupling
SS 410 Threaded Union Stainless Steel 410 Threaded Union SS 410 Threaded Union
410 SS Forged Threaded Union
410 Stainless Steel Threaded Union
SS UNS S41000 Forged Union
SS WERKSTOFF NR. 1.4006 Threaded Union
MSS SP-79 410 Stainless Steel Forged Union
SS 410 Threaded Bushing Stainless Steel 410 Threaded Bushing SS 410 Threaded Bushing
410 SS Forged Threaded Bushing
410 Stainless Steel Threaded Bushing
SS UNS S41000 Forged Bushing
SS WERKSTOFF NR. 1.4006 Threaded Bushing
ASTM A182 410 Stainless Steel Threaded Bushing
SS 410 Threaded Plug Stainless Steel 410 Threaded Plug SS 410 Forged Threaded Plug
410 SS Threaded Plug
410 Stainless Steel Forged Plug
SS UNS S41000 Threaded Plug
SS WERKSTOFF NR. 1.4006 Threaded Plug
ASTM A182 TP 410 Stainless Steel Threaded Plug
SS 304L Threaded Hex Plug Stainless Steel 410 Threaded Hex Plug SS 410 Hex Plug
410 SS Forged Hex Plug
410 Stainless Steel Threaded Hex Plug
SS UNS S41000 Hex Plug
SS WERKSTOFF NR. 1.4006 Forged Hex Plug
ASTM A182 410 Stainless Steel Threaded Hex Plug
SS 410 Hexagonal Plug Stainless Steel 410 Hexagonal Plug SS 410 Hexagonal Plug
410 SS Forged Hexagonal Plug
410 Stainless Steel Hexagonal Plug
SS UNS S41000 Forged Hexagonal Plug
SS WERKSTOFF NR. 1.4006 Hexagonal Plug
ASME SA182 410 Stainless Steel Forged Hexagonal Plug
SS 410 Threaded Pipe Nipple Stainless Steel 410 Threaded Pipe Nipple SS 410 Threaded Pipe Nipple
410 SS Forged Pipe Nipple
410 Stainless Steel Threaded Pipe Nipple
SS UNS S41000 Forged Pipe Nipple
SS WERKSTOFF NR. 1.4006 Threaded Pipe Nipple
ASME 16.11 410 Stainless Steel Threaded Pipe Nipple

 

SS 410 Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 410 0.15 max 1.00 max 1.00 max 0.040 max 0.030 max 11.50 – 13.50 0.75 max

Stainless Steel 410 Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.8 g/cm3 1400 °C (2550 °F) Psi – 65000 , MPa – 450 Psi – 30000 , MPa – 205 20%

Equivalent Grades for 410 Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 410 1.4006 S41000 SUS 410 410S21 X12Cr13

Stainless Steel 410 Forged Threaded Fittings Price List

  • SS 410 Forged Fittings
    FOB Price: USD $0.5-1000 / Piece
  • Stainless Steel 410 Threaded Fitting
    FOB Price: USD $0.5-1000 / Piece
  • 410 Stainless Steel Forged Threaded Fittings
    FOB Price: USD $0.5-1000 / Piece
  • ASTM A182 410 stainless steel Forged Fitting
    FOB Price: USD $0.5-1000 / Piece
  • SS 410 Threaded Fittings
    FOB Price: USD $0.5-1000 / Piece

Stainless Steel 410 Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 410 Forged Threaded Fittings Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME  SS 410 Threaded Fitting Value Added Services

Material Testing:
We at Ganpat Industrial Corporation ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 410 Forged Fittings Packaging

SS 410 Forged Fittings Packaging 410 SS Threaded Fittings Packaging We focus on every procedure to assure quality, the package we usually take is pack SS 410 Threaded Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your 410 Stainless Steel Forged Threaded Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The Stainless Steel 410 Threaded Fittings are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps.

SS 410 Forged Threaded Fitting Manufacturer Popular Searches

ss 410 threaded forged fittings dimensions,410 ss forged fittings definition, 3000 lb stainless steel forged fittings, 410 ss forged fittings definition, ss 410 forged steel fittings, ss 410 class 3000 fittings pressure rating, 150# stainless steel 410 threaded fittings, b16.11 pressure rating, ansi 3000 pressure rating, class 9000 fittings pressure rating, class 300 fittings pressure rating, 410 ss class 3000 pipe fittings pressure rating, asme b16.11 class 3000, class 6000 fittings, ss 410 pipe coupling dimensions, steel pipe fitting dimensions chart, stainless steel 410 threaded fittings, ss 410 forged fittings price list, ss 410 forged fittings price, asme b16.11 fittings, 410 threaded fittings dimensions pdf

Stainless Steel 410 Forged Fittings Supplier

MuToronto, Ulsan, Doha, Seoul, Lahore, Granada, Caracas, Algiers, Courbevoie, Kuwait City, Mexico City, Calgary, Colombo, Busan, Sharjah, Moscow, Muscat, Vadodara, Bangkok, Dubai, Bengaluru, Melbourne, Hong Kong, Ankara, Nagpur, Houston, Geoje-si, Al Khobar, Petaling Jaya, Dammam, Karachi, Bhopal, Ernakulam, Gurgaon, Haryana, La Victoria, London, Milan, Dallas, Sydney, Visakhapatnam, Jamshedpur, Noida, Manama, Nashik, Tehran, Navi Mumbai, Ludhiana, Pune, Hyderabad, Kuala Lumpur, Pimpri-Chinchwad, Montreal, Abu Dhabi, Indore, Brisbane, Thane, Gimhae-si, Ranchi, Vung Tau, Chiyoda, Howrah, Los Angeles, Riyadh, Al Jubail, Jaipur, New York, Baroda, Rajkot, Port-of-Spain, Ho Chi Minh City, Cairo, Ahmedabad, Hanoi, New Delhi, Chennai, Coimbatore, Surat, Faridabad, Jakarta, Jeddah, Ahvaz, Thiruvananthapuram, Bogota, Mumbai, Kanpur, Chandigarh, Madrid, Atyrau, Secunderabad, Santiago, Istanbul, Perth, Aberdeen, Lagos, Kolkata, Rio de Janeiro, Edmonton, Singapore.

Stainless Steel 410 Threaded Fittings Exporter

Spain, Russia, Venezuela, Bahrain, Norway, Singapore, Trinidad & Tobago,Tunisia, Afghanistan, Portugal, Bulgaria, Nigeria, Kuwait, Sweden, Austria, Bangladesh, Peru, Chile, Denmark, Zimbabwe, United Arab Emirates, India, Romania, Japan, Czech Republic, Tibet, Ghana, Belgium, Yemen, France, Algeria, Croatia, Morocco, Malaysia, Israel, Turkey, Mexico, Lebanon, Iran, Thailand, Taiwan, Macau, Angola, Ecuador, Netherlands, Azerbaijan, Mongolia, Indonesia, Gabon, New Zealand, Chile, Namibia, Libya, South Africa, Belarus, Kazakhstan, Finland, Nigeria, Ukraine, Egypt, Mexico, Brazil, Poland, United Kingdom, Bolivia, Puerto Rico, Iraq, China, Jordan, Bhutan, Greece, Sri Lanka, Iran, Qatar, Canada, Vietnam, Poland, Estonia, Lithuania, Philippines, Hong Kong, Australia, Oman, Nepal, Germany, South Korea, Kenya, Costa Rica, Argentina, Saudi Arabia, Ireland, Serbia, Gambia, Switzerland, Colombia, Pakistan, Slovakia, Italy, Hungary, United States.