Why Industry Buyers Keep Coming Back to Ganpat Industrial for ASTM A182 F1 Forged Fittings ?
Single PO, Full Range
Elbow, Tee, Union, Coupling, Reducer & Plug consolidated into one shipment
Heat-Number Traceability
Every SA182 Gr F1 billet traced from ladle analysis to finished fitting
Pre-Dispatch Clearance
PMI, hardness, hydrostatic & NDT sign-off completed before any pallet ships
Rapid Quotation
Stock NB 1/8" – 4" sizes quoted back to you within 24 working hours
Forge-Floor Rates
Billet-to-fitting under one roof means no trading-house mark-up on price
ASTM A182 F1 Forged Fittings Technicalities
- 1Standards: ASTM A182, ASME SA182, ASME B16.11, MSS SP-79, MSS SP-83, MSS SP-97
- 2Origin: India • China • Italy • Japanese
- 3Types: Screwed & Socket Weld – Elbow, Tee, Union, Coupling, Reducer, Plug
- 4Size Range: 1/8" to 4" NB • Class 2000# through 9000#
- 5Condition: Hot forged, normalised & tempered, CNC thread finished
- 6Grades: Alloy Steel F1 • UNS K12822 • WNR 1.5415
Or call our Mumbai office: +91 22 6743 7134 • Same-week dispatch on ready stock NB sizes
Ganpat Industrial manufactures ASTM A182 F1 forged fittings starting from certified 0.5Cr-0.5Mo alloy steel billets, a material also identified as SA182 Grade F1, UNS K12822 or WNR 1.5415. Each fitting is forged and then CNC machined in house to meet ASME B16.11 dimensional standards, covering both threaded and socket weld end configurations. The chromium-molybdenum alloying is what gives this grade its edge it maintains mechanical strength and resists creep at elevated temperatures where carbon steel fittings would otherwise weaken or deform over time. Because of this heat-resistant property, F1 fittings are widely specified for superheated steam lines, hydrocracker units, reheat piping and other high-temperature applications across refineries, fertiliser plants and thermal power stations. Every batch shipped is backed by complete heat and cast number documentation, ensuring buyers retain full material traceability from billet to finished product. Based in Mumbai and forging for over 20 years, Ganpat Industrial Corporation exports both stock and custom machined alloy steel fittings to customers across the Middle East, Southeast Asia, African markets and the Americas.
Mumbai · Alloy Steel Forging Manufacturer & Exporter
ASTM A182 F1 Forged Fittings Built To Perform When Piping Runs Hot
Ganpat Industrial forges and precision-machines ASTM A182 F1 (0.5Cr-0.5Mo) fittings designed for steam, refinery and process piping that must stay reliable under elevated temperatures, supporting power plants, hydrocrackers and fertiliser units across India, the Gulf and Southeast Asia.
- ✓ISO 9001:2015
- ✓PED 2014/68/EU
- ✓API Approved Vendor Base
- ✓EN 10204 3.1 Certified
- ✓Government Recognised Exporter
ASME SA 182 Grade F1 Threaded Elbow Manufacturer in India With Size 1/8 to 4″ NB
Specification Of ASTM A182 F1 Forged Fittings
ASTM A182 F1 Screwed Fittings Governing Standard
- ASME B16.11
- MSS SP-79 / SP-83
- MSS SP-97 (Branch)
- ASTM A182 / ASME SA182
WNR 1.5415 Forged Tee Testing Offered
- PMI Spectro Testing
- Hydrostatic Pressure Test
- Ultrasonic & Radiography
- Third-Party Inspection
ASME SA182 F1 Threaded Pipe Fittings Material Grade
- UNS K12822
- WNR 1.5415
- 0.5Cr-0.5Mo Alloy Steel
- ASTM A182 / ASME SA182
SA182 F1 Branch Fitting Documentation
- Mill Test Certificate 3.1
- Material Traceability Report
- Packing List
- Certificate Of Origin
SA182 F1 Forged Plug Packaging Standard
- Individually Wrapped
- Wooden Pallet Crating
- VCI Rust-Preventive Wrap
- Bore & Thread Caps Fitted
Alloy Steel F1 Forged Reducer Manufacturing Origin
- Indian Origin Forging
- Import-Substitution Supply
- Custom Sourced On Request
- Traceable To Cast & Heat No.
ASTM A182 Grade F1 Forged Elbow Production Route
- Closed-Die Hot Forging
- Normalising & Tempering
- CNC Thread Machining
- Shot Blasting & Inspection
A182 Gr F1 Forged Union Surface Finish
- Black / As-Forged Finish
- Machined Bright Finish
- Phosphate Coated (on request)
- Zinc / Epoxy Painted (on request)
UNS K12822 Pipe Coupling Size & Class Range
- NB: 1/8" – 4"
- Class: 2000# / 3000# / 6000# / 9000#
- Thread: NPT, BSPT, BSPP
- Custom Bore Per Drawing
UNS K12822 Screwed Fittings Size Availability
End connection and size availability varies by fitting type, with screwed covering the widest range across the board.
Reducers
Bushings
Elbows
Couplings
Plugs
Caps
Tees
Unions
Get American Origin UNS K12822 Socket Weld Coupling and Tee With NPT and NPTF Threads
SA 182 Gr F1 Forged Elbow Thread Types
Top ASTM A182 F1 Forged Fittings Supplier in India featuring multiple standard thread forms to match global piping specifications.
NPT Thread
ASME B1.20.1 • tapered pipe thread, most widely specified
BSPT Thread
BS 21 / ISO 7 • tapered thread for British/European projects
BSPP Thread
ISO 228 • parallel thread, sealed with a washer or O-ring
Custom Thread
Made to order as per buyer drawing or project specification
Socket Weld
ASME B16.11 • non-threaded, welded fitment for high integrity joints
UNF Thread
Fine pitch thread, used on select fastener-style fittings on request
Types Of Alloy Steel F1 Forged Fittings
Every fitting type below is forged in house, letting buyers cover a full piping bill of material from a single supplier.
ASTM A182 F1 Threaded Elbow
ASME B16.11
SA182 F1 Socket Weld Tee
Equal / Reducing
UNS K12822 Forged Union
MSS SP-83
WNR 1.5415 Pipe Coupling
Full / Half
ASTM A182 Grade F1 Forged Reducer
MSS SP-79
A182 Gr F1 Forged Plug
Round / Square Head
Alloy Steel F1 Branch Fitting
MSS SP-97
ASME SA182 F1 Forged Cap
ASME B16.11
Looking For An ASTM A182 F1 Fitting Outside Standard Sizes?Send us your drawing and receive a direct factory quote within 24 hours.
ASME SA182 F1 Forged Fittings Price Factors
◆NB Size & Pressure Class
◆Fitting Type & End Connection
◆Order Quantity & Lead Time
◆Testing & Certification Level
Check Current ASTM A182 F1 Forged Fitting PricingDirect from factory rates, ready floor stock in popular NB sizes and flexible order quantities for regular buyers.
ASTM A182 F1 Forged Fittings vs ASTM A105 Forged Fittings
ASTM A182 F1 Forged Fittings
- Chromium & molybdenum: 0.44–0.65%
- Tensile strength: 415 MPa min
- Max service temp: 454°C
- Yield strength: 220 MPa min
- Cost premium: 10–15% over A105
- Elongation: 20% min
ASTM A105 Forged Fittings
- Chromium & molybdenum: 0%
- Tensile strength: 485 MPa min
- Max service temp: 399°C
- Yield strength: 250 MPa min
- Cost premium: base price
- Elongation: 22% min
SA 182 Gr F1 Forged Tee Weight Chart
Indicative per piece weight for a Class 3000# threaded elbow, forged to ASME B16.11 dimensions.
2" NB
2.35 kg
Wall 5.5 mm • Class 3000#
1/4" NB
0.11 kg
Wall 2.4 mm • Class 3000#
1-1/2" NB
1.60 kg
Wall 4.8 mm • Class 3000#
1/8" NB
0.07 kg
Wall 2.4 mm • Class 3000#
3" NB
3.80 kg
Wall 6.9 mm • Class 3000#
3/4" NB
0.65 kg
Wall 3.7 mm • Class 3000#
4" NB
5.35 kg
Wall 8.0 mm • Class 3000#
1" NB
0.90 kg
Wall 4.2 mm • Class 3000#
3/8" NB
0.16 kg
Wall 2.6 mm • Class 3000#
2-1/2" NB
3.20 kg
Wall 6.3 mm • Class 3000#
1-1/4" NB
1.25 kg
Wall 4.5 mm • Class 3000#
1/2" NB
0.40 kg
Wall 3.2 mm • Class 3000#
WNR 1.5415 Forged Elbow Chemical Composition
Each heat undergoes ladle analysis to confirm it falls within ASTM A182 limits before any forging starts.
MolybdenumMo
0.44–0.65%
SulphurS
≤ 0.030%
ManganeseMn
0.30–0.80%
IronFe
Balance
CarbonC
0.10–0.20%
ChromiumCr
0.44–0.65%
PhosphorusP
≤ 0.030%
SiliconSi
0.10–0.60%
ASME SA182 F1 Threaded Fittings Mechanical Properties
Tested in normalised & tempered condition, each lot verified against ASTM A182 minimum requirements.
Reduction Of Area
≥ 40%
Toughness
Tensile Strength
≥ 415 MPa
High Load
Elongation (in 2 in.)
≥ 20%
Ductility
Yield Strength (0.2%)
≥ 220 MPa
Design Limit
SA182 Gr F1 Forged Union Testing Methods
We test each F1 fitting at every stage to make sure it meets strength and safety standards before dispatch.
Hardness Test
Confirms normalised & tempered condition sits within Brinell limits
Ultrasonic & Radiography
Internal forging-lap and inclusion screening per ASTM E273 / E446
Chemical Spectro Analysis
Every heat of alloy steel F1 checked against ASTM A182 composition limits
Hydrostatic Test
Pressure-proofed to 1.5x rated class before release for dispatch
PMI Testing
Positive Material Identification confirms grade on every fitting lot
Third-Party Inspection
TPI coverage from SGS, BV or TUV available for export shipments
Hardness Rating Of A182 Gr F1 Forged Elbow
Leading ASTM A182 F1 Forged Fittings Manufacturer in India built for consistent hardness across every forged batch.
Vickers
150 – 220 HV
Precision micro-hardness reading
Brinell
143 – 207 HB
Standard forged-surface reading
Rockwell B
80 – 95 HRB
Shop-floor hardness check
Pressure Rating Of SA182 F1 Branch Fitting
Class ratings shown represent the maximum working pressure each fitting size can safely handle.
Class 3000#
204 Bar
Most common class for F1 fittings
Class 2000#
136 Bar
Entry class for low-pressure lines
Class 6000#
408 Bar
High-pressure steam & process lines
Max Service Temp
454°C
Cr-Mo alloy resists creep beyond this range
Material Equivalent Grades Of Alloy Steel F1 Pipe Coupling
These international designations are commonly cross referenced against the same Cr-Mo forging composition.
JIS
- JIS STPA12
- JIS G3458
- SFVAF1 (Forging)
ASTM / ASME
- ASTM A182 F1
- ASME SA182 F1
- UNS K12822
GB
- GB/T 3077
- 15MoG
- 16Mo3
BS
- BS 1503-620
- BS 3059 Part 2
- 620-440
DIN / WNR
- WNR 1.5415
- 16Mo3
- DIN 17175
EN
- EN 16Mo3
- EN 10222-2
- 1.5415
Application Of ASTM A182 F1 Threaded Fittings
Chosen over plain carbon steel wherever piping systems demand sustained strength at high operating temperatures.
Gas Cracking & Furnace Piping
Power Plant Boiler Piping
Petrochemical Process Piping
Oil & Gas Process Skids
Superheated Steam Headers
Fertiliser Plant High-Temp Lines
Hydrocracker & Refinery Units
Reheat & Feedwater Lines
Planning A Bulk Order For Your Project?Send us your BOQ and get factory-direct pricing with MTC 3.1, ready to ship the same week.
Test Certificates For ASTM A182 F1 Screwed Fittings
Certificate Of Conformance
Issued alongside every SA182 F1 fitting shipment, confirming the batch meets ASTM A182 chemical composition and mechanical property requirements, and has been manufactured strictly in accordance with the applicable governing standard.
ASTM A182 F1 Forged Fittings Delivered Weekly To The Following Countries
| Export To | Countries | Continent | Shipping Time (Days) | Port |
|---|---|---|---|---|
| Peru | South America | 45 | Salaverry | |
| Algeria | Africa | 45 | Bejaia | |
| Nigeria | Africa | 30 | Calaba |
Monthly Delivery Of ASTM A182 F1 Forged Fittings To Below Countries
| Export To | Countries | Continent | Shipping Time (Days) | Port |
|---|---|---|---|---|
| Morocco | Africa | 45 | Jorf Lasfar | |
| Argentina | South America | 45 | Rosario |
Heat Treatment Process For SA182 Gr F1 Forged Elbow
Being a SA182 F1 forged fittings supplier in India, we work only with forgers who follow controlled well-documented heat treatment cycles.
Annealing
845°C – 900°C (1553°F – 1652°F) • held 1–2 hours
Furnace Cooling
Tempering
650°C – 730°C (1202°F – 1346°F) • held 1–3 hours
Air Cooling
Normalising
870°C – 940°C (1598°F – 1724°F) • held 1–2 hours
Air Cooling
Stress Relieving
595°C – 650°C (1103°F – 1202°F) • held 1–2 hours
Furnace Cooling
ASTM A182 F1 Forged Tee Documentation
Top ASTM A182 F1 Forged Fittings Supplier in India featuring certification with every dispatch
Packing List
Itemised piece count, weight & carton breakup
Every Order
Material Traceability Report
Cast & heat number linked to finished fitting batch
On Request
Commercial Invoice
PO-matched invoice with HSN & GST breakup
Every Order
Certificate Of Origin
For customs clearance & import duty processing
Export Orders
Marking & Identification On A182 F1 Forged Plug
Every forged fitting carries permanent markings so buyers can verify grade and rating on site.
Heat / Lot Number
Tagged for cross-reference against the mill test certificate
On Request
Pressure Class Rating
2000# / 3000# / 6000# / 9000# stamped near the thread or socket
Every Fitting
Manufacturer’s Trademark
Identifies the forging mill for full supply-chain accountability
Every Fitting
Nominal Bore Size
Marked in inches or DN alongside the fitting type
Every Fitting
Material Grade Symbol – F1
Stamped or embossed on the body to confirm alloy grade at a glance
Every Fitting
ASTM A182 F1 Forged Fittings Frequently Asked Questions
What is ASTM A182 F1 material equivalent to?
It corresponds to WNR 1.5415 and UNS K12822, both referring to the same 0.5Cr-0.5Mo alloy steel grade.
What is the maximum service temperature for SA182 F1 forged fittings?
The chromium-molybdenum composition allows continuous service up to roughly 454°C without significant loss of strength.
Is ASTM A182 F1 the same as ASTM A105?
No. F1 contains chromium and molybdenum for better high-temperature performance, while A105 is a plain carbon steel suited to lower temperatures.
What sizes are available in ASME SA182 F1 threaded fittings?
Standard stock covers 1/8″ to 4″ NB, and custom sizes can be produced on drawing for specific project requirements.
Do SA182 F1 fittings come with mill test certificates?
Yes, every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate with complete heat traceability.
Call Now For A Free Sample, Which Can Be Arranged From The Cities Specified Below
| Al Khobar (Saudi Arabia) | Abu Dhabi (UAE) |
| Texas (USA) | Dubai (UAE) |
| Riyadh (Saudi Arabia) | Indiana (USA) |
| Al Jubail (Saudi Arabia) | Houston (USA) |
| Dammam (Saudi Arabia) | California (USA) |