What Makes Ganpat Industrial Corporation The Right Source For Alloy Steel F22 Round Bar ?
Our Own Forging Shop
Bars, fasteners, fittings and flanges forged in-house since 1997, not traded blind
Heat-Wise Traceability
Every F22 bar carries a stamped heat number tied to its EN 10204 3.1 certificate
Temper Chart On File
Furnace log and tempering record shared with the MTC on request
Quote In 24 Hours
Send diameter, class, length and quantity for next-morning pricing
Same-Week Dispatch
Rack diameters leave Mumbai within 5 working days of PO release
Alloy Steel F22 Round Bar Functionalities
- 1Material Basis: Low Alloy Chrome Moly Steel • 2.25% Cr – 1% Mo • UNS K21590
- 2Governing Standards: ASTM A182 / ASME SA182 Grade F22 • Class 1 & Class 3
- 3Size Range: Rolled Rounds 6 mm to 100 mm • Forged Rounds Up To 850 mm • Cut To Length
- 4Heat Treatment: Normalised & Tempered Or Quenched & Tempered • Temper 675°C (1250°F) Min
- 5Equivalents: DIN/EN 10CrMo9-10 • Werkstoff 1.7380 • Matching Pipe ASTM A335 P22
- 6Forms Supplied: Round, Square, Hex, Flat, Triangular, Threaded, Forged & Bright Bar
Mumbai forging desk • WhatsApp +91 85912 64209 • Size-wise pricing inside 24 hours
Ganpat Industrial Corporation has forged and stocked alloy bar in Mumbai since 1997. F22 Alloy Steel Round Bar carries a nominal 2.25% chromium and 1% molybdenum. That chemistry gives creep strength up to 595°C. It also resists high temperature hydrogen attack per API 941. So refineries pick it for hydrotreater and hydrocracker duty. Oil well builders pick it for wellhead connectors and hangers. We forge our own bar and hold ASTM A182 Alloy F22 Round Bars on rack. Class 1 and Class 3 tempers are both offered. Every heat ships with an EN 10204 3.1 certificate. Regular despatches move to Vadodara, Jamnagar and Chennai. Exports run to Dammam, Doha, Abu Dhabi and Houston.
Mumbai · 2.25Cr-1Mo Chrome Moly Bar Forging Shop & Exporter
High Strength ASTM A182 Grade F22 Rod Manufacturer in India, Refer Specification
Ganpat Industrial is a forging-backed Alloy Steel F22 Round Bar Supplier in India. Every ASTM A182 F22 heat is tempered at 675°C (1250°F) minimum and despatched with EN 10204 3.1 traceability.
- ✓ISO 9001:2015
- ✓ISO 14001:2015
- ✓OHSAS 18001:2007
- ✓PED Certified
- ✓Petrofac Approved
UNS Designation
K21590
ASTM A182 / ASME SA182 Grade F22
Alloy System
2.25Cr – 1Mo
Low alloy chrome moly steel
Max Service Temp
595°C
1100°F, creep-rated F22 Steel Rounds
Strength Classes
Class 1 & 3
Class 3 is the piping default
Alloy Steel F22 Round Bar Specification
Everything an inspector will ask about ASTM A182 F22 Rod, on one screen.
F22 Bar Material Basis
- Low Alloy Chrome Moly Steel
- 2.25% Chromium – 1% Molybdenum
- UNS K21590
- Ferritic, Heat Treatable
Governing Bar Standards
- ASTM A182 / A182M Grade F22
- ASME SA182 F22
- ASTM A336 F22 For Heavy Forgings
- EN 10CrMo9-10 / 1.7380 Basis
Class Options
- Class 1: 415 MPa Tensile Min
- Class 3: 515 MPa Tensile Min
- Class 3 Is The Piping Default
- Class Marked On Every Tag
F22 Bar Size Range
- Rolled Rounds 6 mm – 100 mm
- Forged Rounds Up To 850 mm
- Lengths 1 – 6 Metre, Cut To Size
- Machined Blanks Per Drawing
Delivery Condition
- Normalised & Tempered
- Quenched & Tempered On Request
- Temper 675°C (1250°F) Minimum
- Annealed For Class 1 Duty
Production Route
- Forged Or Hot Rolled From Billet
- Heat Treated In Batch Furnace
- Peeled / Ground For Bright Bar
- Proof Machined On Request
Testing Offered
- PMI Spectro Analysis
- Tensile, Hardness & Impact
- Ultrasonic Test On Request
- Third Party Inspection
Matching Products
- ASTM A335 P22 Seamless Pipe
- A234 WP22 Buttweld Fittings
- A182 F22 Flanges & Forged Fittings
- Chrome Moly Stud Bolts
Packing
- Anti-Rust Oil Coat
- Bundled With Heat Number Tags
- Fumigated Wooden Crates
- VCI Wrap For Sea Freight
Need F22 Alloy Steel Forged Bars Above 500 mm?Mail the diameter, length and class. Large forged blanks are quoted the same day from our own hammer shop.
Types Of Alloy Steel F22 Bar
As an Alloy Steel F22 Round Bar Manufacturer in India, we forge every section in-house.
Alloy Steel F22 Round Bar
Round Section
Alloy Steel F22 Square Bar
Square Section
Alloy Steel F22 Hexagonal Bar
Hex Section
F22 Alloy Steel Flat Bar
Flat Section
Alloy Steel F22 Forged Bar
Forged Blank
Alloy F22 Bright Bar
Peeled & Ground
ASTM A182 F22 Black Bar
As Rolled
Hot Rolled Alloy Steel F22 Round Bar
Hot Rolled
Alloy Steel F22 Cold Drawn Round Bar
Close Tolerance
ASTM A182 Alloy Steel F22 Threaded Bar
Full / Part Thread
ASTM A182 F22 Rod Size Chart
| Section | Size Range | Typical Length |
|---|---|---|
| ASTM A182 F22 Rod (Round) | 6 mm – 100 mm rolled, up to 850 mm forged | 1 – 6 metre, custom cut |
| Alloy Steel F22 Square Bar | 10 mm x 10 mm – 100 mm x 100 mm | 1 – 6 metre |
| ASTM A182 Chrome Moly F22 Hex Bar | 12 mm – 80 mm A/F | 1 – 6 metre |
| ASTM A182 Grade F22 Flat Bar | 5 mm – 100 mm thickness | 1 – 6 metre |
| F22 Alloy Steel Triangular Bar | Milled to drawing | As drawing |
| ASTM A182 Alloy Steel F22 Threaded Bar | M10 – M100 | Cut to stud length |
Heat Treatment Of F22 Chrome Moly Rods
Where The Class 3 Numbers Come From
Every batch of F22 Chrome Moly Rods is furnace-logged with accompanying test certificates.
Forge / Hot Roll
Billet worked to round, square, hex or flat section
Normalise
Austenitised and air cooled to refine the grain
Temper 675°C Min
Held at 1250°F minimum for stable creep properties
Q&T Option
Quench and temper route for Class 3 wellhead duty
Test & Release
Tensile, hardness and PMI cleared before tagging
Alloy F22 Bright Bar Weight Chart
Weight per metre at 7.85 g/cm³ density. Quick formula: dia² (mm) x 0.006165 = kg per metre. A 22 mm bar works out to 2.98 kg per metre.
| Dia (mm) | Kg / Metre | Dia (mm) | Kg / Metre |
|---|---|---|---|
| 10 | 0.62 | 63 | 24.47 |
| 16 | 1.58 | 75 | 34.68 |
| 20 | 2.47 | 90 | 49.94 |
| 22 | 2.98 | 100 | 61.65 |
| 25 | 3.85 | 150 | 138.71 |
| 32 | 6.31 | 200 | 246.60 |
| 40 | 9.86 | 300 | 554.85 |
| 50 | 15.41 | 500 | 1541.25 |
F22 Chrome Moly Polished Bar Grades
One 2.25Cr-1Mo Chemistry Across Product Forms
Match the bar to the rest of your chrome moly piping class before ordering.
ASTM / ASME / UNS
- ASTM A182 F22 / ASME SA182
- UNS K21590
- ASTM A336 F22 (Heavy Forgings)
DIN / EN / Werkstoff
- 10CrMo9-10
- Werkstoff No. 1.7380
- Same 2.25Cr-1Mo Basis
AFNOR / BS
- AFNOR 10CD9-10
- BS 622 Grade Family
- Confirmed By Chemistry On Order
JIS Family
- SCMV4 (2.25Cr-1Mo Plate)
- STPA24 (2.25Cr-1Mo Pipe)
- Family Match, Not One-To-One
Matching ASTM Forms
- A335 P22 Pipe / A213 T22 Tube
- A387 Gr 22 Plate
- A234 WP22 Fittings / A217 WC9 Cast
Indian Market Note
- No Single-Number IS Equivalent
- Ordered As F22 / K21590
- Class Stated On The PO
Weekly Delivery Of Alloy Steel F22 Round Bar In Below Countries
| Export To | Continent | Port | Shipping Time |
|---|---|---|---|
 |
South America | Santos Port | 23-55 Days |
 |
Africa | Durban Port | 15-33 Days |
Alloy Steel F22 Black Bar Chemical Composition
Heat analysis held against ASTM A182 limits on every cast. Class 1 and Class 3 share the same chemistry.
IronFe
Balance
ChromiumCr
2.00 – 2.50%
MolybdenumMo
0.87 – 1.13%
ManganeseMn
0.30 – 0.60%
SiliconSi
0.50% max
CarbonC
0.05 – 0.15%
PhosphorusP
0.040% max
SulphurS
0.040% max
Alloy Steel F22 Cold Drawn Round Bar Mechanical Properties
Pick The Class Before You Compare Prices
Both classes share one chemistry. The heat treatment sets them apart, and your MTC values follow the class you order.
ASTM A182 F22 Class 1
- Tensile 415 MPa (60 ksi) min
- Yield 205 MPa (30 ksi) min
- Elongation 20% min, RA 35% min
- Hardness 170 HB max, annealed supply
ASTM A182 F22 Class 3
- Tensile 515 MPa (75 ksi) min
- Yield 310 MPa (45 ksi) min
- Elongation 20% min, RA 30% min
- Hardness 156 – 207 HB, N&T or Q&T
Class 3 Tensile
515 MPa Min
75 ksi min, per ASTM A182
Class 3 Yield (0.2%)
310 MPa Min
45 ksi min
Elongation
20% Min
In 2 in. [50 mm] or 4D
Class 3 Hardness
156 – 207 HB
Brinell, heat treated condition
Physical Properties Of F22 Alloy Steel Round Bar
This Alloy Steel F22 Round Bar Supplier in India keeps stock heat-treated for hydrogen and creep duty.
Density
7.85 g/cm³
Low alloy steel basis, ~0.284 lb/in³
Modulus Of Elasticity
190 – 210 GPa
At room temperature
Magnetic Behaviour
Magnetic
Ferritic structure, unlike SS bar
Max Service Temp
595°C
1100°F, creep-rated duty
Hydrogen Service
API 941 Rated
Resists high temp hydrogen attack
Low Temp Toughness
Down To -60°C
Impact-tested supply, section dependent
Sour Service
NACE MR0175
Supplied ≤ 22 HRC on request
Weldability
Good, With PWHT
Preheat plus 690 – 750°C PWHT
F22 Vs F11 Vs F91
Almost every hydroprocessing enquiry asks this. Here is the honest ladder between the three chrome moly bar grades.
A182 F11 Round Bar
- 1.25Cr-0.5Mo, lowest alloy cost
- Lower creep strength ceiling
- Less hydrogen attack margin per API 941
- Fine for moderate steam duty
Alloy Steel F22 Round Bar
- 2.25Cr-1Mo, higher creep strength
- Better hydrogen attack resistance
- Standard for hydrotreater forgings
- Serves up to 595°C (1100°F)
A182 F91 Round Bar
- 9Cr-1Mo-V, 620 MPa tensile min
- Built for the hottest steam circuits
- Strict welding, PWHT and hardness control
- Higher price and QC burden
Alloy Steel F22 Round Bar
- Easier to weld and machine
- Lower lifecycle QC cost
- Proven in refinery and oil well service
- Right choice below F91 temperatures
Alloy Steel F22 Round Bar Monthly Delivery In Below Nation
| Export To | Continent | Port | Shipping Time |
|---|---|---|---|
 |
Asia | Shenzhen Port | 9 Days |
 |
Africa | Lagos Port | 27 Days |
Purchase F22 Chrome Moly Polished Bar and Forged Bars in Custom Size at Temperatures above 1250°F for Refinery & Oil Well Equipment
Hot Rolled Alloy Steel F22 Round Bar Application Industries
For high-pressure power plant steam headers, trust an Alloy Steel F22 Round Bar Supplier in India.
Refinery Hydrotreater & Hydrocracker Units
Oil Well Wellhead Connectors & Hangers
Block Valve Bodies & Stems
Power Plant High Temperature Steam Lines
Boiler & Pressure Vessel Components
Heat Exchanger Tie Rods & Internals
Flange & Forged Fitting Blanks
Base Metal For Clad Components
F22 Alloy Steel Forged Bars Surface Finish
Finish decides machining allowance and delivery time, so lock it on the enquiry itself. Alloy Steel F22 Black Bar ships fastest from rack.
Black / As Rolled
- Mill scale surface, machining allowance
- Fastest ex-stock option
- Best per-kg economy
- Suits rough machined components
Bright / Peeled
- Peeled and ground scale-free surface
- Closer diameter tolerance
- Less first-cut machining waste
- Preferred for shafts and studs
Polished / Proof Machined
- Centreless ground or polished OD
- Proof machined blanks per drawing
- Ready for finish turning
- Ultrasonic-friendly surface
ASTM A182 F22 Black Bar Testing Methods
Every heat is tested before it is tagged, and third party witness is welcome on the shop floor.
Chemical / PMI Analysis
Spectro reading against ASTM A182 F22 composition limits
Tensile & Yield Test
Class 1 or Class 3 minimums proven per ASTM A182
Hardness Test
Brinell checked lot wise, 156 – 207 HB band for Class 3
Charpy Impact Test
Sub-zero impact sets tested on request, down to -60°C
Ultrasonic Test
UT scan for internal soundness on large forged rounds
Third Party Inspection
SGS, BV, TUV or Lloyd’s arranged before dispatch
F22 Alloy Steel Flat Bar Test Certificate & Documentation
Paperwork That Clears Vendor Audits
The document pack travels with every despatch, so your QA desk never chases us after delivery.
Alloy Steel F22 Round Bar Price In India
Per-Kg Rates That Follow The Alloy Market
Chrome and moly additions move with ferro-alloy rates, so F22 is priced on the day. These factors set your number.
Send a size-wise quantity list with the class marked. Per-kg pricing lands inside 24 hours with HSN and GST worked out.
Stock, MOQ & Dispatch Timeline
From Enquiry To Gate Pass
The real clock on an Alloy Steel F22 Round Bar order, stage by stage.
Day 0 – Enquiry
Mail diameter, class, finish and quantity to our Mumbai desk
Day 1 – Quote
Per-kg rate against the day’s alloy reference, HSN and GST included
Day 3 – Inspection
Chemistry, hardness and PMI cleared, TPI called if needed
Day 5 – Dispatch
Rack sizes leave with LR copy and the full document set
Rack Stock
10 – 90 mm Dia
Round, hex and flat held in Mumbai
Minimum Order
150 Kg
Per size, trial lots considered
Forged Bar Lead Time
25 – 30 Days
Above 200 mm, forged against order
Export Transit
Nhava Sheva
Air or sea, FOB CFR CIF DDP quoted
Alloy Steel F22 Round Bar Frequently Asked Questions
What is the weight of Alloy Steel F22 Round Bar per meter?
About 2.98 kg/m at 7.85 g/cm³ density, using dia² × 0.006165.
What is the chemical composition of F22 Chrome Moly Rods?
Carbon 0.05-0.15%, chromium 2.25%, molybdenum 1%, per ASTM standards.
What material is equivalent to ASTM A182 F22 Rod?
DIN 10CrMo9-10; equivalents include A335 P22 pipe and A387 Gr22 plate.
Is F22 Alloy Steel Forged Bars Class 1 or Class 3?
Class 3 (515 MPa tensile) is standard; Class 1 is softer annealed.
What temperature can Hot Rolled Alloy Steel F22 Round Bar handle?
Creep-rated up to 595°C (1100°F), with hydrogen attack resistance per API 941.
Sales Representatives Across Various Continents
| Continents | Country |
|---|---|
| Africa | Nigeria, Egypt, South Africa, Kenya, Ghana, Ethiopia |
| North America | United States, Canada, Mexico, Cuba |
| South America | Brazil, Argentina, Colombia, Chile, Peru |
| Asia | India, Japan, South Korea, Indonesia, Saudi Arabia, Iran |
| Europe | Germany, France, UK, Italy, Spain, Poland, Ukraine |
| Australia | New Zealand, Papua New Guinea, Fiji, Samoa |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA