Alloy Steel F5 Threaded Forged Fittings

Alloy Steel F5 Threaded Forged Fittings 2019-04-15T11:47:06+00:00

ASME SA182M Alloy Steel F5 Threaded Forged Tee, ASTM A182 Alloy Steel F5 Threaded Elbow, Alloy Steel F5 Threaded BEND, Alloy Steel F5 Threaded Fittings, F5 Chrome Moly Threaded Forged Cap Manufacturer and Suppliers In Mumbai, India.

Alloy Steel F5 Threaded Weld Cross, Alloy Steel F5 Threaded Bushing, F5 Alloy Steel Threaded Coupling Exporter, F5 Chrome Moly Forged Threaded 90 deg. Elbow, Alloy Steel F5 Threaded Forged Pipe Elbow, Alloy Steel F5 Hex Plug, Grade F5 Alloy Threaded Forged Tee Exporter in India.

Alloy Steel F5 Threaded Forged Fittings

Ganpat Industrial Corporation is a known supplier, distributor and stockist of Alloy Steel F5 Forged Threaded Pipe Fittings, which should be machined in the annealed condition using surface speeds. The parts should then be Alloy Steel F5 Forged Threaded Elbow Fittings which is generally considered to be weldable by the common fusion and resistance techniques. For maximum corrosion resistance to chemical environments, it is essential that the surface of Alloy Steel F5 Forged Threaded Tee Fittings be free of all heat tint or oxide formed during annealing or hot working. All surfaces of Alloy Steel F5 Forged Threaded Cross Fittings must be ground or polished to remove any traces of oxide and surface decarburization. Alloy Steel F5 Forged Threaded Cap Fittings useful for storing and handling acetic acid, especially in solutions where it is combined with formic acid and when aeration is not present (oxygen helps protect stainless steel under such conditions), though it provides the greatest level of resistance to corrosion. Alloy Steel F5 Forged Threaded Bend Fittings can be used in continuous service up to 1300 Degree F (705 Degree C), where scaling becomes excessive above 1500 Degree F (811 Degree C) in intermittent service. There are various sizes, shapes and surface finishes of Alloy Steel F5 Forged Threaded Coupling Fittings to suit the environment the alloy must endure. Alloy Steel F5 Forged Threaded Union Fittings is used for corrosion – resistant tools such as this nutcracker.

ASME 16.11 Alloy Steel F5 Threaded Fittings, Alloy Steel F5 Threaded Forged Plug, Chrome Moly F5 Threaded Forged Equal Tee, Alloy Steel F5 Lateral Tee, Alloy Steel F5 Hexagonal Plug, Alloy Steel F5 Threaded Union Exporter, F5 Alloy Steel High Pressure Class 6000 Threaded Fittings Supplier in India.

Alloy Steel F5 Forged Threaded Fittings

Alloy Steel F5 Threaded Forged Fittings
F5 Alloy Steel 45 deg Threaded Forged Elbow
Alloy Steel F5 Threaded Forged Coupling
Alloy Steel F5 Threaded Forged Union
Alloy Steel F5 Threaded Hexagonal Plug
Alloy Steel F5 Threaded Forged Tee
F5 Alloy Steel 90 Deg Threaded Forged Elbow

Alloy Steel F5 Threaded Forged Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/2″ NB TO 48″ NB.
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Forged Fittings

Types of Alloy Steel F5 Threaded Forged Fittings

Alloy Steel F5 Threaded Forged Elbow Alloy Steel F5 Threaded Forged Elbow Alloy Steel F5 45 Threaded Forged Elbow
F5 Chrome Moly 90 Deg. Threaded Forged Elbow
Alloy Steel High Pressure Fittings F5 45 Degree Threaded Forged Elbow
Alloy Steel F5 45 Deg. Threaded Forged Elbow
ASME SA182 F5 Alloy Steel 90 Degree Threaded Forged Elbow
Alloy Steel F5 Threaded Forged Tee Alloy Steel F5 Threaded Forged Tee Alloy Steel F5 Threaded Forged Tee
F5 Alloy Steel High Pressure Threaded Forged Tee
Chrome Moly F5 Threaded Forged Tee
F5 Alloy Steel Threaded Forged Tee
Alloy Steel F5 Threaded Forged Tee
ASTM A182 Alloy Steel F5 Threaded Forged Tee
Alloy Steel F5 Threaded Forged Coupling Alloy Steel F5 Threaded Forged Coupling Alloy Steel F5 Threaded Forged Coupling
F5 Alloy Steel Threaded Forged Coupling
Alloy Steel High Pressure F5 Threaded Forged Coupling
F5 Alloy Steel  Threaded Forged Coupling
ASTM A182 Chrome Moly F5 Threaded Forged Coupling
Alloy Steel F5 Threaded Forged Cross Alloy Steel F5 Threaded Forged Cross Alloy Steel F5 Threaded Forged Cross
F5 Alloy Steel High Pressure Threaded Forged Cross
F5 Alloy Steel Threaded Forged Cross
Alloy Steel F5 Threaded Forged Cross
ASME SA182 Chrome Moly F5 Threaded Forged Cross
Alloy Steel F5 Threaded Forged Union Alloy Steel F5 Threaded Forged Union Alloy Steel F5 Threaded Forged Union
F5 Chrome Moly Threaded Forged Union
Alloy Steel High Pressure F5 Threaded Forged Union
Alloy Steel F5 Threaded Forged Union
ASME 16.11 Alloy Steel F5 Threaded Forged Union
Alloy Steel F5 Threaded Forged Cap Alloy Steel F5 Threaded Forged Cap Alloy Steel F5 Forged Threaded Cap
F5 Alloy Steel High Pressure Threaded Forged Cap
Alloy Steel F5 Threaded Forged Cap
Chrome Moly F5 Threaded Forged Cap
ASTM A182 TP F5 Alloy Steel  Threaded Cap
Alloy Steel F5 Threaded Forged 90 Deg Elbow Alloy Steel F5 Threaded Forged 90 Deg Elbow Alloy Steel F5 Threaded Forged 90 Deg Elbow
Chrome Moly F5 Threaded Forged 90 Deg Elbow
Alloy Steel High Pressure F5 Threaded Forged 90 Deg Elbow
Alloy Steel F5 Threaded Forged 90 Deg Elbow
ASTM A182 F5 Alloy Steel Threaded 90 Deg Elbow
Alloy Steel F5 Threaded Forged Plug Alloy Steel F5 Threaded Forged Plug Alloy Steel F5 Threaded Forged Plug
Chrome Moly F5 Threaded Forged Plug
Alloy Steel High Pressure F5 Threaded Forged Plug
Alloy Steel F5 Threaded Forged Plug
ASTM A182 F5 Alloy Steel Threaded Plug
Alloy Steel F5 Threaded Forged Bushing Alloy Steel F5 Threaded Forged Bushing Alloy Steel F5 Threaded Forged Bushing
Chrome Moly F5 Threaded Forged Bushing
Alloy Steel High Pressure F5 Threaded Forged 90 Deg Bushing
Alloy Steel F5 Threaded Forged Bushing
ASTM A182 F5 Alloy Steel Threaded Bushing

 

Alloy Steel F5 Threaded Forged Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
Alloy Steel F5 0.15 max 0.3-0.6 0.5 0.03 0.03 4-6 0.044-0.65

Alloy Steel Grade F5 Threaded Forged Fitting Mechanical Properties

Tensile Strength Yield Strength (0.2%Offset) Elongation
275 485 20 %

Alloy Steel Gr. F5 Forged Threaded Forged Fittings Price List

  • Alloy Steel F5 Forged Fittings
    FOB Price: USD $0.098-42 / Piece
  • Alloy Steel F5 Threaded Forged Fitting
    FOB Price: USD $10-3800 / Piece
  • Alloy Steel Forged Threaded Fittings
    FOB Price: USD $0.098-42 / Piece
  • ASTM A182 Alloy Steel F5 Threaded Forged Fitting
    FOB Price: USD $10-3800 / Piece
  • Alloy Steel F5 Threaded Fittings
    FOB Price: USD $10-3800 / Piece

Alloy Steel F5 Threaded Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel F5 Threaded Forged Fittings Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME  Alloy Steel F5 Threaded Forged Fitting Value Added Services

Material Testing:
We at Ganpat Industrial Corporation ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Alloy Steel F5 Threaded Forged Fittings Packaging

Alloy Steel F5 Threaded Forged Fittings Packaging F5 Alloy Steel Threaded Fittings Forged PackagingAlloy Steel F5 Threaded Forged Fittings are packaged to ensure that there is no damage during transit. In case of Alloy Steel F5 Threaded Forged Fittings exports, standard export packaging is done in wooden cases. All F5 Alloy Steel Threaded Forged Fittings are marked with Grade, Lot No, Size, Degree and our trade mark. On special requests we can also, make custom marking on our products. Our Experienced warehouse guys are always ready to pick out your order and get it ready for delivery.

Alloy Steel F5 Threaded Forged Fitting Manufacturer Popular Searches

asme b16.11 fittings, f5 threaded forged fittings dimensions pdf, alloy steel f5 thereaded forged pipe fitting dimensions, 3000 lb alloy steel f5 forged fittings, alloy steel f5 class 3000 thereaded forged fittings pressure rating, 150# alloy steel f5 thereaded forged fittings, a182 f5 equivalent, astm a182 f5 specification, f5 material properties, astm a182 alloy steel f5 thereaded forged fittings chemical composition, astm a182 f5 thereaded forged fittings  equivalent, astm a182 f5 pdf, astm a182 f5, astm a182 f5 class 3, astm a182 standard pdf manufacturer, alloy steel f5 thereaded forged fittings price

Alloy Steel F5 Threaded Forged Fittings Supplier

New York, Houston, Haryana, Geoje-si, Vung Tau, Doha, New Delhi, London, Perth, Caracas, Ernakulam, Thane, Jeddah, Muscat, Visakhapatnam, Chennai, Rajkot, Santiago, Hyderabad, Al Khobar, Dallas, Vadodara, Moscow, Mexico City, Gurgaon, Nagpur, Calgary, Dammam, Ludhiana, Ahmedabad, Algiers, Surat, Dubai, Pimpri-Chinchwad, Melbourne, Seoul, Lagos, Kanpur, Howrah, Abu Dhabi, Jamshedpur, Bhopal, Navi Mumbai, Sharjah, Al Jubail, Milan, Toronto, Ulsan, Bengaluru, Aberdeen, Coimbatore, Ho Chi Minh City, Los Angeles, Petaling Jaya, Nashik, La Victoria, Faridabad, Sydney, Atyrau, Singapore, Pune, Lahore, Courbevoie, Manama, Edmonton, Ankara, Tehran, Baroda, Jakarta, Granada, Kolkata, Mumbai, Ahvaz, Indore, Busan, Rio de Janeiro, Brisbane, Port-of-Spain, Karachi, Secunderabad, Madrid, Colombo, Bangkok, Kuala Lumpur, Ranchi, Chandigarh, Hanoi, Thiruvananthapuram, Gimhae-si, Istanbul, Montreal, Bogota, Noida, Riyadh, Chiyoda, Hong Kong, Jaipur, Kuwait City, Cairo.

Alloy Steel Grade F5 Threaded Forged Fittings Exporter

France, Sweden, Bahrain, Gambia, Mexico, Romania, Ghana, Pakistan, Puerto Rico, Libya, Lebanon, Nepal, Vietnam, Finland, Algeria, India, Estonia, Egypt, Taiwan, Chile, Hong Kong, Trinidad & Tobago,Tunisia, Iran, United Arab Emirates, Mongolia, Czech Republic, Germany, Italy, Israel, Kenya, Gabon, Japan, New Zealand, Austria, United States, Slovakia, Bangladesh, Saudi Arabia, Morocco, Mexico, Chile, Tibet, Greece, Zimbabwe, Belarus, Russia, Canada, Turkey, Australia, Namibia, Ireland, Serbia, Yemen, Nigeria, Afghanistan, Poland, Bhutan, Belgium, China, Costa Rica, Switzerland, Colombia, United Kingdom, Peru, Portugal, Norway, Lithuania, Argentina, Brazil, Venezuela, Singapore, Qatar, Macau, Iran, Denmark, Poland, Azerbaijan, Kuwait, Bulgaria, Thailand, Philippines, Hungary, Kazakhstan, Jordan, Netherlands, Oman, Ecuador, Bolivia, Angola, Ukraine, Croatia, Sri Lanka, Spain, Nigeria, Iraq, Malaysia, South Africa, Indonesia, South Korea.