Alloy Steel F91 Threaded Forged Fittings

Alloy Steel F91 Threaded Forged Fittings 2019-04-15T06:20:54+00:00

ASTM A182 Alloy Steel F91 Threaded Elbow, ASME SA182M Alloy Steel F91 Threaded Forged Tee, Alloy Steel F91 Threaded Fittings, Alloy Steel F91 Threaded BEND, F91 Chrome Moly Threaded Forged Cap Manufacturer and Suppliers In Mumbai, India.

F91 Chrome Moly Forged Threaded 90 deg. Elbow, Alloy Steel F91 Threaded Weld Cross, F91 Alloy Steel Threaded Coupling Exporter, Alloy Steel F91 Threaded Bushing, Alloy Steel F91 Threaded Forged Pipe Elbow, Alloy Steel F91 Hex Plug, Grade F91 Alloy Threaded Forged Tee Exporter in India.

Alloy Steel F91 Threaded Forged Fittings

Ganpat Industrial Corporation is a known distributor, supplier and stockist of Alloy Steel F91 Forged Threaded Pipe Fittings, which is not recommended for use in temperatures above the relevant tempering temperature, because of reduction in mechanical properties. Our Alloy Steel F91 Forged Threaded Elbow Fittings has highly resistant to stress corrosion cracking if aged at 550 Degree C or higher, where higher aging temperatures give better SCC resistance. Heat this Alloy Steel F91 Forged Threaded Tee Fittings uniformly up to 1200 Degree F / 1400 Degree F (650 Degree C / 760 Degree C) along with air cool. For maximum softness, heat this Alloy Steel F91 Forged Threaded Cross Fittings up to 1500 Degree F / 1650 Degree F (815 Degree C / 900 Degree C) along with slow furnace cool. Temper this Alloy Steel F91 Forged Threaded Cap Fittings at temperatures appropriate to produce desired mechanical properties. If this Alloy Steel F91 Forged Threaded Coupling Fittings is tempered in the range 750 Degree F / 1050 Degree F (400 Degree C / 565 Degree C), there will be a decrease in impact strength and in corrosion resistance – depending upon the media. The tempering range 425 Degree C – 600 Degree C in this Alloy Steel F91 Forged Threaded Bend Fittings should be avoided. Meanwhile, the scaling temperature of our Alloy Steel F91 Forged Threaded Bushing Fittings should be approximately temperature of 650 Degree C.

Alloy Steel F91 Threaded Forged Plug, Alloy Steel F91 Hexagonal Plug, Alloy Steel F91 Threaded Union Exporter, Chrome Moly F91 Threaded Forged Equal Tee, ASME 16.11 Alloy Steel F91 Threaded Fittings, Alloy Steel F91 Lateral Tee, F91 Alloy Steel High Pressure Class 6000 Threaded Fittings Supplier in India.

Alloy Steel F91 Forged Threaded Fittings

Alloy Steel F91 Threaded Forged Fittings
F91 Alloy Steel 45 deg Threaded Forged Elbow
Alloy Steel F91 Threaded Forged Coupling
Alloy Steel F91 Threaded Forged Union
Alloy Steel F91 Threaded Hexagonal Plug
Alloy Steel F91 Threaded Forged Tee
F91 Alloy Steel 90 Deg Threaded Forged Elbow

Alloy Steel F91 Threaded Forged Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/2″ NB TO 48″ NB.
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Forged Fittings

Types of Alloy Steel F91 Threaded Forged Fittings

Alloy Steel F91 Threaded Forged Elbow Alloy Steel F91 Threaded Forged Elbow Alloy Steel F91 45 Threaded Forged Elbow
F91 Chrome Moly 90 Deg. Threaded Forged Elbow
Alloy Steel High Pressure Fittings F91 45 Degree Threaded Forged Elbow
Alloy Steel F91 45Deg Forged Threaded Elbow
Alloy Steel F91 45 Deg. Threaded Forged Elbow
ASME SA182 F91 Alloy Steel 90 Degree Threaded Forged Elbow
Alloy Steel F91 Threaded Forged Tee Alloy Steel F91 Threaded Forged Tee Alloy Steel F91 Threaded Forged Tee
F91 Alloy Steel High Pressure Threaded Forged Tee
Chrome Moly F91 Threaded Forged Tee
F91 Alloy Steel Threaded Forged Tee
Alloy Steel F91 Threaded Forged Tee
ASTM A182 Alloy Steel F91 Threaded Forged Tee
Alloy Steel F91 Threaded Forged Coupling Alloy Steel F91 Threaded Forged Coupling Alloy Steel F91 Threaded Forged Coupling
F91 Alloy Steel Threaded Forged Coupling
Alloy Steel F91 Threaded Forged Coupling
Alloy Steel High Pressure F91 Threaded Forged Coupling
F91 Alloy Steel  Threaded Forged Coupling
ASTM A182 Chrome Moly F91 Threaded Forged Coupling
Alloy Steel F91 Threaded Forged Cross Alloy Steel F91 Threaded Forged Cross Alloy Steel F91 Threaded Forged Cross
Alloy Steel F91 Threaded Forged Cross
F91 Alloy Steel High Pressure Threaded Forged Cross
F91 Alloy Steel Threaded Forged Cross
Alloy Steel F91 Threaded Forged Cross
ASME SA182 Chrome Moly F91 Threaded Forged Cross
Alloy Steel F91 Threaded Forged Union Alloy Steel F91 Threaded Forged Union Alloy Steel F91 Threaded Forged Union
F91 Chrome Moly Threaded Forged Union
Alloy Steel F91 Threaded Forged Union
Alloy Steel High Pressure F91 Threaded Forged Union
Alloy Steel F91 Threaded Forged Union
ASME 16.11 Alloy Steel F91 Threaded Forged Union
Alloy Steel F91 Threaded Forged Cap Alloy Steel F91 Threaded Forged Cap Alloy Steel F91 Forged Threaded Cap
Alloy Steel F91 Threaded Forged Cap
F91 Alloy Steel High Pressure Threaded Forged Cap
Alloy Steel F91 Threaded Forged Cap
Chrome Moly F91 Threaded Forged Cap
ASTM A182 TP F91 Alloy Steel  Threaded Cap
Alloy Steel F91 Threaded Forged 90 Deg Elbow Alloy Steel F91 Threaded Forged 90 Deg Elbow Alloy Steel F91 Threaded Forged 90 Deg Elbow
Chrome Moly F91 Threaded Forged 90 Deg Elbow
Alloy Steel High Pressure F91 Threaded Forged 90 Deg Elbow
Alloy Steel F91 Threaded Forged 90 Deg Elbow
Alloy Steel F91 Threaded Forged 90 Deg Elbow
ASTM A182 F91 Alloy Steel Threaded 90 Deg Elbow
Alloy Steel F91 Threaded Forged Plug Alloy Steel F91 Threaded Forged Plug Alloy Steel F91 Threaded Forged  Plug
Chrome Moly F91 Threaded Forged  Plug
Alloy Steel High Pressure F91 Threaded Forged Plug
Alloy Steel F91 Threaded Forged Plug
Alloy Steel F91 Threaded Forged Plug
ASTM A182 F91 Alloy Steel Threaded Plug
Alloy Steel F91 Threaded Forged Bushing Alloy Steel F91 Threaded Forged Bushing Alloy Steel F91 Threaded Forged Bushing
Chrome Moly F91 Threaded Forged Bushing
Alloy Steel High Pressure F91 Threaded Forged Bushing
Alloy Steel F91 Threaded Forged Bushing
Alloy Steel F91 Threaded Forged Bushing
ASTM A182 F91 Alloy Steel Threaded Bushing

 

Alloy Steel F91 Threaded Forged Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
Alloy Steel F91 0.08-0.12 0.3-0.6 0.5 0.01 0.02 8.5-9.5 0.85-1.05

Alloy Steel Grade F91 Threaded Forged Fitting Mechanical Properties

Tensile Strength Yield Strength (0.2%Offset) Elongation
415 585 20 %

Alloy Steel Gr. F91 Forged Threaded Forged Fittings Price List

  • Alloy Steel F91 Forged Fittings
    FOB Price: USD $0.098-42 / Piece
  • Alloy Steel F91 Threaded Forged Fitting
    FOB Price: USD $10-3800 / Piece
  • Alloy Steel F91 Forged Threaded Fittings
    FOB Price: USD $0.098-42 / Piece
  • ASTM A182 Alloy Steel F91 Threaded Forged Fitting
    FOB Price: USD $10-3800 / Piece
  • Alloy Steel F91 Threaded Fittings
    FOB Price: USD $10-3800 / Piece

Alloy Steel F91 Threaded Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel F91 Threaded Forged Fittings Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME  Alloy Steel F91 Threaded Forged Fitting Value Added Services

Material Testing:
We at Ganpat Industrial Corporation ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Alloy Steel F91 Threaded Forged Fittings Packaging

Alloy Steel F91 Threaded Forged Fittings Packaging F91 Alloy Steel Threaded Forged Fittings PackagingAlloy Steel F91 Threaded Forged Fittings are packaged to ensure that there is no damage during transit. In case of Alloy Steel F91 Threaded Forged Fittings exports, standard export packaging is done in wooden cases. All F91 Alloy Steel Threaded Forged Fittings are marked with Grade, Lot No, Size, Degree and our trade mark. On special requests we can also, make custom marking on our products. Our Experienced warehouse guys are always ready to pick out your order and get it ready for delivery.

Alloy Steel F91 Threaded Forged Fitting Manufacturer Popular Searches

astm a182 f91 thereaded forged fittings equivalent, astm a182 f91 pdf, astm a182 f91, astm a182 f91 class 3, astm a182 standard pdf manufacturer, 3000 lb alloy steel f91 forged fittings, alloy steel f91 thereaded forged fittings price, asme b16.11 fittings, f91 threaded forged fittings dimensions pdf, alloy steel f91 thereaded forged pipe fitting dimensions, astm a182 alloy steel f91 thereaded forged fittings chemical composition, alloy steel f91 class 3000 thereaded forged fittings pressure rating, 150# alloy steel f91 thereaded forged fittings, a182 f91 equivalent, astm a182 f91 specification, f91 material properties

Alloy Steel F91 Threaded Forged Fittings Supplier

Jakarta, Santiago, Montreal, Howrah, Haryana, Granada, Atyrau, Kuala Lumpur, Bogota, Pune, Brisbane, Al Jubail, Nashik, Chiyoda, Sharjah, Chandigarh, Kanpur, Toronto, Ernakulam, Geoje-si, Al Khobar, Ahmedabad, Petaling Jaya, Calgary, London, Vung Tau, Madrid, Rio de Janeiro, Seoul, Faridabad, Chennai, Houston, Ranchi, Rajkot, Milan, Bangkok, Mexico City, Pimpri-Chinchwad, Bengaluru, Lahore, Ahvaz, Muscat, Aberdeen, Bhopal, Ludhiana, Coimbatore, Melbourne, Vadodara, Navi Mumbai, Indore, Edmonton, Manama, Jamshedpur, Mumbai, Visakhapatnam, Moscow, Ankara, Riyadh, Gimhae-si, Dammam, Perth, Hong Kong, Sydney, Karachi, Kuwait City, Baroda, Dallas, Jeddah, Doha, Hyderabad, Cairo, Courbevoie, Abu Dhabi, Dubai, Nagpur, Lagos, Noida, Surat, Thiruvananthapuram, Port-of-Spain, Algiers, Hanoi, Singapore, Jaipur, New Delhi, Thane, Ho Chi Minh City, Kolkata, Ulsan, Los Angeles, Gurgaon, Istanbul, Tehran, La Victoria, New York, Colombo, Busan, Secunderabad, Caracas.

Alloy Steel Grade F91 Threaded Forged Fittings Exporter

Sri Lanka, Finland, United Kingdom, South Korea, Netherlands, United Arab Emirates, Spain, Romania, Libya, Zimbabwe, Philippines, France, Pakistan, Lithuania, Czech Republic, Denmark, Kenya, Serbia, New Zealand, Angola, Nigeria, Lebanon, Kazakhstan, Norway, Mexico, Ireland, Iraq, Namibia, Turkey, Portugal, Canada, Nepal, Nigeria, Poland, Poland, Algeria, Hong Kong, Gambia, Yemen, Austria, Ukraine, United States, Hungary, Japan, Bulgaria, Gabon, Egypt, Peru, Belarus, Trinidad & Tobago,Tunisia, Qatar, Bolivia, Saudi Arabia, Tibet, Israel, Singapore, Italy, Chile, Colombia, Ghana, Ecuador, Morocco, Switzerland, Brazil, Thailand, Costa Rica, Macau, Afghanistan, Azerbaijan, Mongolia, Belgium, Sweden, Slovakia, Bhutan, Australia, Venezuela, Mexico, Iran, Taiwan, China, Indonesia, Russia, Puerto Rico, Germany, Kuwait, Argentina, Bangladesh, India, Bahrain, Jordan, South Africa, Croatia, Vietnam, Estonia, Malaysia, Chile, Iran, Greece, Oman.