Why Aerospace & Marine Buyers Choose Ganpat Industrial For Aluminium Tube?
6mm – 300mm OD Range
Small instrumentation sizes to large structural OD, one supplier
5 Grades, 1 Enquiry
6061 • 6063 • 6082 • 5083 • 2024 – all on one PO
Aerospace & Marine Tested
PMI • eddy current • MTC 3.1 on every heat lot
Zero Guesswork Sizing
Dimensional check against ASTM B210 / EN 755-2 before dispatch
Quote In 24 Hours
Ready stock on standard OD & WT – ships same week
Aluminium Tube Quick Facts
- 1Type: Seamless, Welded, Round, Square, Coiled, Heat Exchanger
- 2Size Range: OD 6 mm to 300 mm • WT 0.5 mm to 12 mm
- 3Common Grades: 6061, 6063, 6082, 5083, 2024
- 4Standards: ASTM B210, ASTM B221, ASTM B241, EN 573-3, EN 755-2, JIS H4080
- 5Origin: Indian origin • European origin • Heat-number traceable
- 6Finish: Mill Finish, Anodized, Bright Annealed, Polished
Or call our Mumbai office: +91 22 6743 7134 • Fast dispatch on ready stock sizes
Ganpat Industrial manufactures Aluminium Tube in seamless and welded constructions. We supply 6061, 6063, 6082, 5083 and 2024 aluminium grades. Our tubes are drawn and tested for demanding industrial applications. Products conform to ASTM B210 and EN 755-2 standards. As an Aluminium Tube Supplier In India, we maintain ready stock. We also provide custom OD and wall thickness as specified. Our tubes serve aerospace, marine, structural and process applications. We supply customers across India, UAE and the Middle East.
Mumbai · Aluminium Tube Manufacturer In India
Strong, Lightweight And Ready For Industry.
Ganpat Industrial stocks Aluminium Tube in multiple grades for aerospace, marine and process industries across India, UAE and Middle East.
- ✓ASTM B211 Compliant
- ✓Multiple Aluminium Grades
- ✓Custom OD & Wall Thickness
- ✓MTC Certified
Get ASTM B211 Aluminium Seamless Tube Supplier in India, Available in Grade 6061, 6063 & 2024 With Custom Sizes
Aluminium Tube Specification
Get complete details from a trusted Aluminium Tube Supplier In India for every grade.
Aluminium WERKSTOFF NR. 3.1255 Tube Material
- UNS A96061
- UNS A96063
- UNS A96082
- UNS A95083
- UNS A92024
ASTM B211 Aluminium Tube Size Range
- OD: 6 – 300 mm
- WT: 0.5 – 12 mm
- Length: Up to 6 m / coil
- Custom sizes on drawing
Aluminium 5083 High Pressure Tubes Testing
- PMI Testing
- Eddy Current Test
- Dimensional Check
- Third-Party Inspection
Aluminium UNS A96061 Square Tube Finish
- Mill Finish
- Anodized (Class I / II)
- Bright Annealed
- Polished / Electropolished
Aluminium 6061 Bright Annealed Tube Documentation
- Mill Test Certificate 3.1
- NABL Lab Report
- Packing List
- Certificate Of Origin
6082 Aluminium Polish Tube Origin
- Indian Origin
- European Origin
- Heat-Number Traceable
- Mill-Direct Sourcing
Buy Alu 6061 Heat Exchanger Tube in Size 6mm to 300mm With Mill Finish For Aerospace, Marine & Structural Applications
Size Chart of Aluminium 6061 Bright Annealed Tube
Standard OD & wall thickness combinations kept in ready stock.
| OD (mm) | Wall Thickness (mm) | ID (mm) | Tolerance OD | Common Grades |
|---|---|---|---|---|
| 6 – 12 | 0.5 – 1.5 | 3 – 11 | ±0.10 mm | 6061, 6063 |
| 12 – 25 | 1 – 2.5 | 7 – 23 | ±0.13 mm | 6061, 6063, 2024 |
| 25 – 50 | 1.5 – 4 | 17 – 47 | ±0.20 mm | 6061, 6082, 5083 |
| 50 – 100 | 3 – 6 | 38 – 94 | ±0.30 mm | 6061, 6082, 5083 |
| 100 – 200 | 5 – 10 | 80 – 190 | ±0.40 mm | 6061, 6082 |
| 200 – 300 | 8 – 12 | 176 – 284 | ±0.50 mm | 6061, 6082 |
Manufacturing Process of ASTM B211 Aluminium Tube
Billet & MTC Check
Incoming aluminium billet verified against Mill Test Certificate 3.1
Hot Extrusion
Billet pushed through die & mandrel to form the hollow tube profile
Cold Drawing
Tube drawn through die to final OD & wall thickness with tight tolerance
Solution Heat Treatment
Solutionized and quenched to develop the specified T4 / T6 temper
Straightening & Cutting
Roller straightened and cut to length or coiled per order
Inspection & Packing
PMI & dimensional check, then export-ready packing
Aluminium 6061 Welded Tubes Surface Finish
Choose the right surface finish for enhanced protection, appearance, and performance.
Mill Finish
Anodized (Class I / II)
Bright Annealed
Polished / Electropolished
Brushed Finish
Powder Coated
Weekly Delivery of Aluminium 5083 Cold Rolled Coiled Tube To The Following Countries
| Export to | Countries | Continent | Shipping time | Ports |
|---|---|---|---|---|
|
USA | North America | 30-45 Days | Port of Los Angeles |
|
UAE | Asia | 11-50 Days | Port of Singapore |
|
Italy | Europe | 20-54 Days | Port of Antwerp-Bruges |
Need Aluminium 6082 Electropolish Tube Cut To Custom OD Or Length?Share size & quantity – get factory price with MTC 3.1 in 24 hours.
Various Types of Aluminium Tube
Aluminium 6061 Seamless Tubes
ASTM B211
5083 Aluminium Instrumentation Tube
Marine Grade
Aluminium UNS A96061 Square Tube
Custom Drawing
Aluminium 6061 Bright Annealed Tube
Bright Finish
6082 Aluminium Heat Exchanger Tube
ASTM B211
Aluminium Werkstoff Nr. 3.1355 Tube
2024 Grade
Aluminium Sanitary Tube
Food / Pharma
6082 Aluminium Polish Tube
Polished Finish
Aluminium Sanitary Tube Chemical Composition
| Grade | Mg | Si | Cu | Mn | Primary Use |
|---|---|---|---|---|---|
| 6061 | 0.80–1.20 | 0.40–0.80 | 0.15–0.40 | ≤0.15 | Structural, aerospace fittings |
| 6063 | 0.45–0.90 | 0.20–0.60 | ≤0.10 | ≤0.10 | Architectural, decorative |
| 6082 | 0.60–1.20 | 0.70–1.30 | ≤0.10 | 0.40–1.00 | High-strength structural |
| 5083 | 4.00–4.90 | ≤0.40 | ≤0.10 | 0.40–1.00 | Marine, cryogenic |
| 2024 | 1.20–1.80 | ≤0.50 | 3.80–4.90 | 0.30–0.90 | Aircraft structure |
Mechanical Properties of Aluminium Capillary Tube
Tensile Strength
260 MPa Min
6061-T6, ASTM B221
Yield Strength
240 MPa Min
0.2% Proof Stress
Hardness
≈ 95 HB
Brinell, Typical
Elongation
8% Min
6061-T6, ASTM B221
ASTM B211 Aluminium Tube Material Equivalent
| Grade | UNS Number | EN Designation | DIN / Werkstoff Nr. |
|---|---|---|---|
| 6061 | A96061 | EN AW-6061 | 3.3211 |
| 6063 | A96063 | EN AW-6063 | 3.3206 / 3.32206* |
| 6082 | A96082 | EN AW-6082 | 3.2315 |
| 5083 | A95083 | EN AW-5083 | 3.3547 |
| 2024 | A92024 | EN AW-2024 | 3.1355 |
Machining Guide of Aluminium 6082 Electropolish Tube
Turning & Facing
- Sharp, high-rake tooling
- High speed, light cut for 6061/6063
- Support thin-wall tube to avoid chatter
Drilling
- Use coolant to clear chips
- Reduced feed on 2024 (work-hardens)
- Deburr both ends after drilling
Tapping & Threading
- Use aluminium-rated tap fluid
- Slower speed reduces galling
- Class 2B fit typical for fasteners
B211 Aluminium 6082 Heat Exchanger Tube Welding Considerations
Choose The Right Filler
4043 or 5356 filler for 6061/6063/6082 tube joints
Step 1
Clean Before Welding
Remove oxide layer & degrease the joint area
Step 2
Use TIG Or MIG
TIG for thin-wall, MIG for thicker-section tube
Step 3
Expect Heat-Affected Zone Softening
6061-T6 drops toward T4 strength near the weld
Step 4
Note: 2024 Is Not Recommended For Welding
Use mechanical joining or brazing instead of arc welding on 2024 tube
Step 5
Buying In Bulk For An Aerospace Or Marine Project?Send your BOQ – factory price, MTC 3.1, dispatch same week.
Testing Methods of 5083 Aluminium Instrumentation Tube
PMI Testing
Positive Material Identification confirms alloy grade per heat
Eddy Current Test
Detects surface & near-surface flaws on drawn tube per ASTM E215/E243
Dimensional & Visual
OD, ID, wall thickness & surface checked per lot
Tensile & Hardness Test
Confirms temper strength matches the ordered T4 / T6 condition
Pressure / Flare Test
Hydrostatic or flare check for pressure & fluid-line duty tube
Third-Party Inspection
TPI witness available on request before dispatch
Aluminium 6061 Decorative Tube Marking
Alloy & Temper
e.g. 6061-T6, printed or tagged per ASTM B666 marking practice
Heat / Lot Number
Links tube back to the Mill Test Certificate 3.1
Manufacturer & Country Of Origin
Stamped or bundle-tagged as required by the buyer
Governing Standard
ASTM B210 / EN 755-2 reference marked on tag or bundle label
Weight Chart of 6082 Aluminium Polish Tube
| OD (mm) | Wall Thickness (mm) | ID (mm) | Weight (kg/m) |
|---|---|---|---|
| 10 | 1.0 | 8 | 0.076 |
| 12 | 1.5 | 9 | 0.134 |
| 16 | 2.0 | 12 | 0.238 |
| 20 | 2.0 | 16 | 0.305 |
| 25 | 2.5 | 20 | 0.477 |
| 32 | 3.0 | 26 | 0.738 |
| 40 | 3.0 | 34 | 0.942 |
| 50 | 4.0 | 42 | 1.561 |
Applications of Aluminium 6061 Seamless Tubes
Get Aluminium Tube Manufacturer in India providing diverse applications for engineering requirements.
Aerospace Structures
Marine & Shipbuilding
Heat Exchangers & Chillers
Hydraulic & Pneumatic Lines
Architectural & Facade
Automotive & Rail Tube
Instrumentation & Process Lines
Structural & Fabrication
Monthly Delivery of Aluminium WERKSTOFF NR. 3.1255 Tube To The Following Countries
| Export to | Countries | Continent | Shipping time | Ports |
|---|---|---|---|---|
|
Spain | Europe | 33-34 Days | Port of Hamburg |
|
Malaysia | Asia | 19-23 Days | Port of Shanghai |
|
Germany | Europe | 20-45 Days | Port of Rotterdam |
Frequently Asked Questions
Which Aluminium Tube grade suits marine use?
5083 is widely used for marine applications and seawater exposure.
Is Aluminium 5083 Cold Rolled Coiled Tube weldable?
2024 is generally unsuitable for arc welding.
What OD and wall thickness range do you stock for Aluminium 6061 Welded Tubes?
OD ranges from 6mm to 300mm, with walls from 0.5mm to 12mm.
Sales Representative Available to Provide Quick Quote
| Saudi Arabia | Nigeria | UAE | Oman | South Africa |
|---|---|---|---|---|
| USA | Angola | Algeria | Kenya | Tanzania |
| Ethiopia | Gabon | Zambia | Ghana | Morocco |
| New South Wales | Tunisia | Mozambique | Egypt | – |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA