What Makes Ganpat Industrial The Right Brass Hydraulic Fittings Partner?
DZR-Checked On Request
Dezincification testing available for marine & potable-contact fittings
Same-Week Dispatch
Standard BSP & NPT sizes packed and shipped within 7 days
Turned From Certified Brass Bar
CW614N / C36000 rod machined in-house with an MTC issued on every heat
Free-Machining Grade, Tight Threads
Near-100% machinability keeps BSP/NPT gauge consistent batch after batch
Every Fitting Type, One Order
Nipple • Elbow • Tee • Cross • Plug • Bend • Banjo — single PO
Brass Hydraulic Fittings Spotlight
- 1Common Grades: C36000, CW614N, CuZn39Pb3, IS 319 Type I
- 2Standards: ASTM B16 / B124, EN 12164 / 12165, DIN 2999, ISO 228 / ISO 7
- 3Type: Nipple, Elbow, Tee, Cross, Plug, Cap, Bend, Banjo, Reusable, Hose Fitting
- 4Origin: Indian origin • European origin
- 5Size Range: 1/8″ to 2″ NB • Metric M8 to M42 • per ISO 228 / ASME B1.20.1
- 6Finish: Natural Brass, Nickel Plated, Chrome Plated, Bright Polished
Or call our Mumbai office: +91 22 6743 7134 • Same-week dispatch on standard sizes
A hydraulic circuit only stays leak-free if the fitting resists what the line carries oil, coastal moisture, chemical spray and that’s the job brass does better than most alternatives. At Ganpat Industrial, every nipple, elbow, tee, cross & plug is machined in-house from CW614N / C36000 free-machining bar, so the BSP and NPT thread gauge stays consistent piece after piece. Buyers place one order covering the full fitting range and receive one dispatch, cutting out the back-and-forth of sourcing each part from a different vendor.
Mumbai · Brass Hydraulic Fittings Manufacturer & Exporter
Brass Hydraulic Fittings Machined To BSP & NPT Gauge For A Joint That Never Weeps
Ganpat Industrial machines and supplies CW614N / C36000 Brass Hydraulic Fittings to buyers running compressors, hose assemblies, cranes and agri-spray equipment across India, the UAE and the Middle East.
- ✓ISO 9001:2015
- ✓ISO 14001:2015
- ✓OHSAS 18001:2007
- ✓RoHS Compliant
- ✓Petrofac Approved
Brass Hydraulic Elbow and Plug Manufacturer in India With Size 1/16 to 2” At Lowest Price
Brass Hydraulic Fittings Specification
As a trusted Brass Hydraulic Fittings Supplier in India, we hold every fitting to the specification below on every order
Brass Tee Documentation Supplied
- Mill Test Certificate 3.1
- Material Test Report
- Packing List
- Certificate Of Origin
Governing Standard For Brass Bend Fittings
- ASTM B16 / B124
- EN 12164 / 12165
- ISO 228 / ISO 7
- DIN 2999
Material Used For Brass Metal Elbow
- C36000
- CW614N
- CuZn39Pb3
- IS 319 Type I
Pressure Class Of Brass Alloy Plug
- Up to 150 Bar (Standard)
- Class 3000 On Request
- Suitable For Hydraulic & Pneumatic Lines
Quality Checks On Brass Banjo Fittings
- Hydrostatic Pressure Test
- Dezincification Check
- Thread Gauge Check
- Third-Party Inspection
How Brass Cross Fittings Are Made
- Hot Forging
- CNC Turning & Threading
- Hex Bar Machining
- Deburring & Polishing
Origin Of Brass Alloy Hose Fittings
- Indian Origin
- European Origin
- Traceable To Heat / Lot No.
Surface Finish Options For Brass Cap
- Natural Brass Finish
- Nickel Plated
- Chrome Plated
- Bright Polished
Thread & Size Range For Brass Metric Nipples
- Thread: 1/8″ – 2″ BSP/NPT
- Metric: M8 – M42
- Bore: 3 mm – 50 mm
- Custom sizes on drawing
Brass Bend Fittings Thread Size Chart
| BSP Size | Major Ø (mm) | Pitch (mm) | Threads Per Inch |
|---|---|---|---|
| 3/8″ | 16.662 | 1.337 | 19 |
| 1/4″ | 13.157 | 1.337 | 19 |
| 3/4″ | 26.441 | 1.814 | 14 |
| 1/8″ | 9.728 | 0.907 | 28 |
| 1/2″ | 20.955 | 1.814 | 14 |
| 1.1/4″ | 41.910 | 2.309 | 11 |
| 1″ | 33.249 | 2.309 | 11 |
| 2″ | 59.614 | 2.309 | 11 |
| 1.1/2″ | 47.803 | 2.309 | 11 |
Discover High Quality ASTM B122 Brass Industrial Hose Fittings Online With NPT and BSPT Threads
Thread Types Used In Brass Industrial Hose Fitting
BSPP – Parallel
G-series straight thread, sealed with a washer or O-ring
ISO 228
BSPT – Tapered
R/Rc series taper thread that seals on the thread itself
ISO 7
NPT
60° American taper thread, common on US-spec skids
ASME B1.20.1
JIC 37° Flare
Straight UNF thread with a metal-to-metal flare seat
SAE J514
Metric – DIN 2353
24° cone compression fitting with cutting ring, common on European skids
DIN 2353
ORFS
Flat-face O-ring seal, low vibration leak risk
ISO 8434-3
SAE ORB – O-Ring Boss
Straight thread port with a boss O-ring seal, common on hydraulic manifolds
SAE J1926
UNF – Unified Fine Thread
Straight fine-pitch thread paired with JIC & ORB fittings
SAE J514
Types Of Brass Hydraulic Fittings
Brass Bend Fittings
C36000
Brass Alloy Standard Hose Fittings
CW614N
Brass Metal Banjo Fittings
DIN 7642
Brass Reusable Fittings
SAE 100R
Brass Alloy Industrial Hose Fitting
ISO 8434
Brass Metal Hydraulic Nipples
BSPT
Brass Metric Hydraulic Nipples
DIN 2353
Brass Alloy Plug
BSPP
Brass Metal Tee
C36000
Brass Cross
CW614N
Brass Alloy Cap
ISO 228
Brass Metal Elbow
ASME B1.20.1
Need A Custom Brass Fitting Size Or Thread?Share your drawing — get a factory-price quote within 24 hours.
Chemical Composition Of Brass Alloy Hydraulic Nipples
CopperCu
57.00–59.00%
LeadPb
2.50–3.50%
IronFe
≤ 0.30%
TinSn
≤ 0.30%
NickelNi
≤ 0.30%
AluminiumAl
≤ 0.05%
ZincZn
Balance
Mechanical Properties Of Brass Metal Banjo Fittings
Being a leading Brass Hydraulic Fittings Manufacturer in India, we hold these mechanical properties consistent on every heat.
Tensile Strength
≥ 430 MPa
Load Bearing
Yield Strength (0.2%)
≥ 220 MPa
Design Limit
Elongation (A)
≥ 15%
Ductility
Hardness
90 – 130 HB
Machinability
Comparing Brass Against Stainless Or Carbon Fittings?Send your service conditions — we recommend the right grade.
Brass Reusable Fittings Material Equivalent
ASTM / UNS
- C36000
- ASTM B16
- ASTM B124
EN / DIN
- CW614N
- 2.0401
- EN 12164 / 12165
BS
- CZ121
- BS 2874
- BS 21 (thread)
JIS
- C3604
- JIS H3250
- JIS B2239
IS
- IS 319 Type I
- Grade CuZn39Pb3
GB
- HPb59-1
- GB/T 5231
Brass Hydraulic Nipples Weight Chart
| BSP Size | Weight / Pc (kg) | Fitting Type |
|---|---|---|
| 3/8″ | 0.07 | Hex Nipple |
| 1/4″ | 0.04 | Hex Nipple |
| 3/4″ | 0.18 | Hex Nipple |
| 1/2″ | 0.11 | Hex Nipple |
| 1/8″ | 0.02 | Hex Nipple |
| 1.1/4″ | 0.45 | Hex Nipple |
| 1″ | 0.30 | Hex Nipple |
| 2″ | 1.05 | Hex Nipple |
| 1.1/2″ | 0.65 | Hex Nipple |
Buying In Bulk For A Project?Send your BOQ — factory price, MTC 3.1, dispatch same week.
Brass Hydraulic Fittings Delivered Weekly To The Following Countries
| Export to | Countries | Continent | Ports | Shipping Time |
|---|---|---|---|---|
| Morocco | Africa | Jorf Lasfar | 45 Days | |
| Algeria | Africa | Bejaia | 45 Days | |
| Nigeria | Africa | Calaba | 30 Days |
Monthly Delivery Of Brass Hydraulic Elbow To Below Countries
| Export to | Countries | Continent | Ports | Shipping Time |
|---|---|---|---|---|
| Peru | South America | Salaverry | 45 Days | |
| Argentina | South America | Rosario | 45 Days |
Brass Standard Hose Fittings Pressure & Temperature Rating
As a trusted Brass Hydraulic Fittings Supplier in India, we test every batch to the pressure & temperature rating your drawing calls for.
Working Pressure
Up To 350 Bar
Burst Tested Before Dispatch
Temperature Rating
-20°C To +150°C
Stable Across Oil, Air & Water Lines
Why Brass Hydraulic Fittings Are Preferred Over Steel & PVC
Corrosion Resistance
Won’t rust like steel — handles oil, coastal air & moisture
Tight Thread Fit
Free-machining grade keeps BSP/NPT gauge accurate, unlike PVC
Higher Pressure Handling
Rated well above PVC for hydraulic & pneumatic lines
No Coating Needed
Skips the painting / galvanising steel fittings require
Lighter Than Steel
Same pressure class, less weight on the assembly
Lower Life-Cycle Cost
Fewer replacements & less maintenance over time
Application Of Brass Plug
Hydraulic Power Packs & Pumps
Construction & Earthmoving Equipment
Agricultural Sprayers & Irrigation
Compressors & Pneumatic Lines
Cranes & Material Handling
Instrumentation & Gauge Panels
Marine & Deck Machinery
General Industrial Machinery
Need Brass Fittings Matched To Your OEM Spec?Share the make & model — we’ll cross-reference the thread and grade.
Brass Hydraulic Fittings Price Per Kg In India
HSN Heading
7412
Copper tube or pipe fittings
Brass Fitting Sub-Heading
7412 20 12
Copper alloy – brass hose connectors
GST Rate
18%
Standard rate on brass hydraulic fittings
Typical MOQ
No Minimum
Trial lots to full container loads
Brass Alloy Cross Documentation
Mill Test Certificate 3.1
Chemistry & mechanical results traced to heat / lot number
Every Order
Dezincification Test Report
DZR check for marine & potable-contact fittings
On Request
Certificate Of Origin
For customs clearance & import duty processing
Export Orders
Packing List & Invoice
PO-matched, HSN & GST breakup included
Every Order
Frequently Asked Questions
Which brass grade do you use for hydraulic fittings?
Fittings are turned from CW614N / C36000 (CuZn39Pb3, IS 319 Type I) free-machining brass bar, giving a consistent BSP/NPT thread gauge across every batch.
What size range do you manufacture?
Standard sizes run from 1/8″ to 2″ NB in BSP and NPT threads, with metric options from M8 to M42 per ISO 228 / ASME B1.20.1.
What is the minimum order quantity?
There is no fixed MOQ — we supply everything from trial lots to full container loads.
What is the typical lead time?
Standard BSP and NPT sizes are packed and dispatched within 7 days. Custom sizes or drawing-matched fittings may take longer depending on quantity.
Do you provide Mill Test Certificates?
Yes, a Mill Test Certificate 3.1 covering chemistry and mechanical results, traced to heat/lot number, is issued with every order.
Our Dealers And Distributors Are Present In The Locations Mentioned Below
| Al Jubail | Saudi Arabia | Al-khobar | Riyadh | Dammam | UAE |
| Oman | Abu Dhabi | Mozambique | South Africa | Nigeria | USA |
| Carolina | New South Wales | California | Indiana | Texas | Algeria |
| Tunisia | Morocco | Houston | Kenya | Gabon | Dubai |
| Tanzania | Angola | Zambia | Ethiopia | Egypt | Ghana |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA