Ganpat Industrial Corporation is a known manufacturer of ASTM A105 CS Flanges, where the high strength can pose problems. ASTM A105 Carbon Steel Slip On Flanges is reserved for those steels that contain a modest amount of alloying elements and that usually depend on thermal treatment to develop specific properties. Even when the ductility is adequate, higher forces in ASME SA 105 Carbon Steel Threaded Flanges are required to form the material, for example in tube bending. The heat treatment in ASTM A105 Carbon Steel Socket Weld Flanges should be followed by subsequent rapid cooling in water or air, where this treatment applies for both solution annealing and stress relieving. In special cases, ASME SA 105 Carbon Steel Weld Neck Flanges can be done at 500 Degree C – 550 Degree C. Ganpat Industrial Corporation is one of the stockiest and trader for high quality ASTM A105 Carbon Steel Blind Flanges, where there is one exception to the normal rule of poorer machinability. ASME SA 105 Carbon Steel Lap Joint Flanges are generally more demanding to machine than conventional austenitic stainless steel, due to the higher hardness. However, ASTM A105 Carbon Steel Ring Joint Type Flanges has shown excellent machining properties. ASME SA 105 Carbon Steel Spectacle Blind Flanges is lean steel that generally offers a similar corrosion resistance, but has advantages in oxidizing media such as nitric acid solutions due to its low molybdenum content.
Carbon Steel Flanges are a kind of flanges that is made of carbon steel material. The lower melting point of carbon steel flanges is due to their high carbon content. These flanges offer better heat distribution capabilities and good durability.
Forged carbon steel piping components for ambient temperature as well as high temperature applications in pressure systems are covered by the standard for the carbon steel a105 flanges specification. Flange astm a105 asme b16.5 fittings, valves, and other comparable ordered components are included in these pressure systems.
We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
ASTM, ASME Carbon Steel A105 Flanges Value Added Services
We at Ganpat Industrial Corporation ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Carbon Steel A105 Pipe Flanges Packaging
Carbon Steel A105 Flanges are widely used in various industries including petrochemical, oil and gas, power generation, bulk liquid transportation, chemicals, pharmaceuticals, pulp and paper manufacturing, textiles and others. All our Carbon Steel A105 Flange are manufactured in accordance with international standards. Carbon Steel A105 Pipe Flange are packaged to ensure that there is no damage during transit. In case of exports, standard export packaging is done in wooden cases. All Carbon Steel A105 Plate Flanges are marked with Grade, Lot No, Size, Degree and our trade mark. On special requests we can also, make custom marking on A105 Carbon Steel Flanges.
Carbon Steel A105 Flanges Manufacturer Popular Searches