Ganpat Industrial Corporation is a known trader and stockist of ASTM A694 CS Forged Threaded Fittings, which is used in a wide range of marine, oil and gas environments. Regarding cold workability in ASTM A694 Carbon Steel Forged Threaded Lateral Tee, care is required as proof stress is high and elongation is low in comparison with SS 304. ASME SA 694 Carbon Steel Forged Threaded Hexagonal Plug is commonly used in the mining, marine, pharmaceutical, petrochemical and chemical engineering industries. Typical applications of ASTM A694 Carbon Steel Forged Threaded Hex Plug include flanges, pumps, valves, chokes, connecters and manifolds. We recommend you contact your welding consumables supplier who should provide you full assistance and information of welding ASME SA 694 Carbon Steel Forged Threaded Bushing. Use of welding electrodes for ASTM A694 Carbon Steel Forged Threaded Union is recommended, where pre – heating and post – heating are not necessary. In welding, the inter-pass temperature for ASME SA 694 Carbon Steel Forged Threaded Coupling should be no more than 100 Degree C in order to prevent formation of intermetallic compounds. Solution annealing of ASTM A694 Carbon Steel Forged Threaded Fittings should be performed at 1100 Degree C and higher followed by being quenched in water or rapidly cooled by other means. ASME SA 694 Carbon Steel Forged Threaded Cap is among the most common super steel grade in the market.
ASME 16.11 Carbon Steel Threaded Forged Fittings, Carbon Steel A694 Threaded Forged Plug, Carbon Steel A694 Hex Plug, Carbon Steel A694 Threaded Forged Equal Tee, Carbon Steel A694 Threaded Forged Union Exporter, Carbon Steel A694 Hexagonal Plug, A694 Carbon Steel High Pressure Class 6000 Threaded Forged Fittings Supplier in India.
Carbon Steel A694 Threaded Forged Fittings Test Certificates
We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
We at Ganpat Industrial Corporation ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Forgeding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Carbon Steel A694 Threaded Forged Fittings are packaged to ensure that there is no damage during transit. In case of Carbon Steel A694 Threaded Forged Fittings exports, standard export packaging is done in wooden cases. All A694 Carbon Steel Threaded Forged Fittings are marked with Grade, Lot No, Size, Degree and our trade mark. On special requests we can also, make custom marking on our products. Our Experienced warehouse guys are always ready to pick out your order and get it ready for delivery.
Carbon Steel A694 Threaded Forged Fitting Manufacturer Popular Searches