Why Buyers Choose Ganpat Industrial For ASTM A860 WPHY Fittings ?
Forged To Match Your Pipe
Every fitting forged to the exact yield grade of your API 5L line pipe
All Grades, One Invoice
WPHY 42 • 46 • 52 • 60 • 65 • 70 – single PO, single dispatch
NPS ½″ To 48″ Ready
Full size range in stock, made to ASME B16.9 & MSS SP-75
PMI & Impact Tested
Charpy V-notch at −46°C on base metal and weld, every heat
Container-Ready In 7 Days
Standard NPS & grade combinations ship the same week
ASTM A860 WPHY Fittings Overview
- 1Type: Elbow (45°/90°/180°), Equal & Reducing Tee, Concentric & Eccentric Reducer, Cap, Stub End
- 2Size Range: NPS ½″ to 48″ • Wall SCH 10 to SCH 160 / XXS
- 3Standard: ASME B16.9 (NPS ≤14″) • MSS SP-75 (NPS 16″–48″)
- 4Grades: WPHY 42, 46, 52, 60, 65, 70
- 5Governing Spec: ASTM A860/A860M • ASTM A960/A960M
- 6Origin: Indian origin • grades matched to API 5L pipeline steel
Or call our Mumbai office: +91 22 6743 7134 • Same-week dispatch on standard grades
Ganpat Industrial Corporation is a Mumbai-based ASTM A860 WPHY Fittings manufacturer and exporter. Serving pipeline contractors, EPCs and oil & gas distributors across India, the GCC and Africa for over two decades. We supply certified ASTM A860 Fittings built exactly to client specifications and project requirements. Every ASME SA860 WPHY Fittings order qualifies as genuine ASTM A860 High-Strength Butt Welding Pipe Fittings, forged from fine-grain HSLA billet for guaranteed strength and reliability. Larger sizes are manufactured strictly to MSS SP 75 fittings standards. Each unit is true ASTM A860 WPHY Butt Welding Fittings and ASTM A860 WPHY Carbon Steel Pipe Fittings, heat-treated to the exact yield strength called up on your order. Every Carbon Steel A860 fittings shipment we deliver is never the weak link in a high-pressure gas or crude transmission system.
Mumbai · High-Strength Pipeline Fittings Manufacturer & Exporter
ASTM A860 WPHY Fittings Engineered For Pipeline Integrity, Not Just Certificate Compliance
Ganpat Industrial forges ASTM A860 WPHY 42 to WPHY 70 elbows, tees, reducers and caps engineered to match API 5L X42–X70 line pipe – built for cross-country pipelines, compressor stations and gas gathering systems across India, the Middle East and Africa.
- ✓ISO 9001:2015
- ✓ISO 14001:2015
- ✓OHSAS 18001:2007
- ✓PED Certified
- ✓Petrofac Approved
ASME SA860 WPHY Butt Welding Fittings Manufacturer in India As Per ASME B16.9 in Various Grades
ASTM A860 WPHY Fittings Specification
ASTM A860 WPHY Elbow & Tee Size Range
- NPS: ½″ – 48″
- Wall: SCH 10 – SCH 160 / XXS
- O.D.: 21.3 – 1219 mm
- Custom bore on drawing
ASME SA860 WPHY Governing Standard
- ASME B16.9 (≤ NPS 14″)
- MSS SP-75 (NPS 16″–48″)
- ASTM A860 / A860M
- ASTM A960 / A960M
ASTM A860 Fittings Types
- Elbow 45° / 90° / 180°
- Equal & Reducing Tee
- Concentric / Eccentric Reducer
- Cap & Stub End
MSS SP 75 Fittings Production Route
- Hot Forging / Hot Forming
- Normalizing, Quench & Temper
- Radiography Of Weld Fittings
- Stress Relieving
Carbon Steel A860 Grade Options
- WPHY 42 / 46 / 52
- WPHY 60 / 65 / 70
- Matched To API 5L X42–X70
- Custom CE On Request
ASTM A860 WPHY Carbon Steel Pipe Fittings End Prep
- Bevelled Butt-Weld End
- As Per ASME B16.25
- Field-Weldable Ends
- Custom Bevel On Request
ASTM A860 Fittings Equivalent Grades
WPHY 42
Equivalent to API 5L X42 / X42M
42 ksi / 290 MPa
WPHY 46
Equivalent to API 5L X46 / X46M
46 ksi / 315 MPa
WPHY 52
Equivalent to API 5L X52 / X52M
52 ksi / 360 MPa
WPHY 56
Equivalent to API 5L X56 / X56M
56 ksi / 390 MPa
WPHY 60
Equivalent to API 5L X60 / X60M / X60Q
60 ksi / 415 MPa
WPHY 65
Equivalent to API 5L X65 / X65M / X65Q
65 ksi / 450 MPa
WPHY 70
Equivalent to API 5L X70 / X70M
70 ksi / 485 MPa
Find Carbon Steel A860 Elbow and Tee Stock With Size 1/2 to 24 “(Seamless) and 24″ to 96” (welded) At Factory Price
ASME SA860 WPHY Fittings Dimension Chart
| Nominal Pipe Size | Outside Diameter | 90° Elbows | 45° Elbows | 180° Returns | ||||
|---|---|---|---|---|---|---|---|---|
| (inches) | Long Radius | Short Radius | Long Radius | Long Radius | ||||
| (mm) | (inches) | Center to Face (inches) |
Center to Face (inches) |
Center to Face (inches) |
Radius (inches) |
Center to Center (inches) |
Back to face (inches) |
|
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
Types Of ASTM A860 WPHY Fittings
Being a leading ASTM A860 WPHY Fittings Manufacturer in India, we forge every fitting type from Elbow to Stub End in-house
ASME SA860 WPHY Elbow
ASME B16.9
MSS SP 75 Tee
ASME B16.9
ASTM A860 WPHY Reducer
MSS SP-75
ASTM A860 Pipe Cap
ASME B16.9
ASTM A860 WPHY Stub End
ASME B16.9
ASTM A860 WPHY Carbon Steel Collar
MSS SP-75
Carbon Steel A860 Cross
ASME B16.9
ASTM A860 WPHY Butt Welding Pipe Bend
MSS SP-43
Need A Custom WPHY Grade Or Wall Schedule?Share your line pipe spec or drawing – get a factory-price quote within 24 hours.
Weekly Delivery Of ASTM A860 WPHY Fittings In Below Countries
| Export to | Continent | Shipping Time |
|---|---|---|
UAE |
Middle East | 6 Days |
Saudi Arabia |
Middle East | 10 Days |
Oman |
Middle East | 7 Days |
Kuwait |
Middle East | 8 Days |
ASTM A860 WPHY Elbow Weight Chart
| NPS (Inches) |
DN (mm) |
OD (mm) |
STD | XS | XXS | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ELBOW | CAPS | REDUCERS | TEES | ELBOW | CAPS | REDUCERS | TEES | ELBOW | CAPS | REDUCERS | TEES | |||||||||
| LONG | SHORT | LONG | SHORT | LONG | SHORT | |||||||||||||||
| 90 DEG | 45 DEG | 90 DEG | 90 DEG | 45 DEG | 90 DEG | 90 DEG | 45 DEG | 90 DEG | ||||||||||||
| 1/2 | 15 | 21.3 | 0.08 | 0.04 | 0.04 | 0.09 | 0.1 | 0.05 | 0.05 | 0.11 | 0.12 | 0.06 | 0.12 | |||||||
| 3/4 | 20 | 26.7 | 0.11 | 0.06 | 0.05 | 0.06 | 0.13 | 0.14 | 0.7 | 0.07 | 0.08 | 0.17 | 0.13 | 0.09 | 0.21 | |||||
| 1 | 25 | 33.4 | 0.16 | 0.08 | 0.11 | 0.11 | 0.12 | 0.25 | 0.2 | 0.1 | 0.14 | 0.15 | 0.15 | 0.32 | 0.25 | 0.13 | 0.17 | 0.2 | 0.19 | 0.41 |
| 1 1/4 | 32 | 42.2 | 0.26 | 0.13 | 0.18 | 0.14 | 0.16 | 0.43 | 0.35 | 0.18 | 0.23 | 0.2 | 0.21 | 0.56 | 0.42 | 0.21 | 0.28 | 0.25 | 0.25 | 0.69 |
| 1 1/2 | 40 | 48.3 | 0.37 | 0.19 | 0.25 | 0.17 | 0.25 | 0.61 | 0.5 | 0.25 | 0.33 | 0.24 | 0.33 | 0.81 | 0.65 | 0.33 | 0.43 | 0.35 | 0.43 | 1.07 |
| 2 | 50 | 60.3 | 0.66 | 0.33 | 0.44 | 0.24 | 0.38 | 0.88 | 0.9 | 0.45 | 0.6 | 0.33 | 0.51 | 1.2 | 1.33 | 0.67 | 0.89 | 0.54 | 0.75 | 1.78 |
| 2 1/2 | 65 | 73 | 1.29 | 0.69 | 0.91 | 0.42 | 0.73 | 1.74 | 1.79 | 0.9 | 1.19 | 0.57 | 0.95 | 2.28 | 2.33 | 1.17 | 1.49 | 0.77 | 1.2 | 2.86 |
| 3 | 80 | 88.9 | 2.04 | 1.02 | 1.36 | 0.67 | 0.94 | 2.41 | 2.74 | 1.37 | 1.83 | 0.92 | 1.25 | 3.25 | 3.83 | 1.92 | 2.55 | 1.4 | 1.71 | 4.55 |
| 3 1/2 | 90 | 101.6 | 2.94 | 1.47 | 1.97 | 0.92 | 1.19 | 3.26 | 4.05 | 2.02 | 2.07 | 1.3 | 1.64 | 4.51 | 5.92 | 2.96 | 3.95 | 2.1 | 2.35 | 6.52 |
| 4 | 100 | 114.3 | 3.84 | 1.92 | 2.56 | 1.17 | 1.45 | 4.12 | 5.36 | 2.68 | 3.58 | 1.68 | 2.02 | 5.77 | 8.02 | 4.01 | 5.35 | 2.76 | 3 | 8.5 |
| 5 | 125 | 141.3 | 6.48 | 3.24 | 4.32 | 1.9 | 2.5 | 6.54 | 9.13 | 4.57 | 6.09 | 2.73 | 3.52 | 9.2 | 14.7 | 7.35 | 9.79 | 4.85 | 5.59 | 14.8 |
| 6 | 150 | 168.3 | 9.94 | 4.97 | 6.63 | 2.83 | 3.6 | 9.58 | 15 | 7.5 | 10 | 4.38 | 5.38 | 14.5 | 24.2 | 12.1 | 16.2 | 7.81 | 8.63 | 23.3 |
| 8 | 200 | 219.1 | 20.1 | 10.1 | 13.4 | 5.11 | 5.7 | 17.9 | 30.5 | 15.3 | 20.3 | 7.91 | 8.63 | 27.1 | 53.2 | 26.6 | 35.5 | 15.2 | 15 | 47.2 |
| 10 | 250 | 273 | 35.4 | 17.7 | 23.6 | 8.92 | 9.6 | 30.4 | 47.7 | 23.9 | 31.8 | 12.2 | 12.9 | 41 | 103 | 51.5 | 68.6 | 28.9 | 27.5 | 88 |
| 12 | 300 | 323.8 | 52 | 26 | 34.6 | 13.1 | 13.6 | 43.6 | 68.7 | 34.4 | 45.8 | 17.4 | 18 | 57.7 | 171 | 85.5 | 114 | 47.7 | 44.6 | 143 |
| 14 | 350 | 355.6 | 67.9 | 34 | 45.3 | 15.9 | 25.4 | 53.5 | 89.9 | 15 | 60 | 21.2 | 35.6 | 70.9 | 236 | 118 | 158 | 61.2 | 88.5 | 186 |
| 16 | 400 | 406.4 | 89 | 44.5 | 59.1 | 20 | 31 | 66.1 | 118 | 59 | 78.3 | 26.7 | 41.1 | 87.7 | 350 | 175 | 234 | 92.8 | 121 | 260 |
| 18 | 450 | 457 | 113 | 56.5 | 75.3 | 25.5 | 37.8 | 83.9 | 150 | 75.5 | 100 | 34.1 | 50.1 | 111 | 495 | 247 | 330 | 131 | 165 | 356 |
| 20 | 500 | 508 | 140 | 70 | 93.1 | 31.8 | 55.4 | 104 | 186 | 93 | 124 | 42.5 | 74.9 | 138 | 676 | 338 | 451 | 179 | 233 | 502 |
| 22 | 550 | 559 | 169 | 84.5 | 113 | 38.8 | 62.4 | 126 | 225 | 113 | 150 | 51.7 | 82.9 | 167 | 886 | 443 | 591 | 219 | 657 | |
| 24 | 600 | 610 | 202 | 101 | 135 | 45.1 | 68.4 | 139 | 268 | 134 | 179 | 60.1 | 91 | 186 | 1160 | 580 | 773 | 307 | 800 | |
WPHY 60 vs WPHY 65 Fittings
ASTM A860 WPHY 60 Fitting
- 60 ksi / 415 MPa minimum yield strength
- 75–100 ksi / 515–690 MPa tensile strength
- Matches API 5L X60 line pipe
- 20% / 28% minimum elongation
ASTM A860 WPHY 65 Fitting
- 65 ksi / 450 MPa minimum yield strength
- 77–102 ksi / 530–705 MPa tensile strength
- Matches API 5L X65 line pipe
- 20% / 28% minimum elongation
MSS SP 75 Fittings Welding & Installation Process
1. Verify Grade & Heat Number
Match the mill certificate to the PO before staging on site.
2. Check Bevel & Fit-Up
Confirm bevel angle per ASME B16.25 and root gap.
3. Preheat As Per WPS
Hold the qualified interpass temperature for HSLA base metal.
4. Weld In Controlled Passes
Root, hot, fill and cap passes per the qualified WPS.
5. Post-Weld Heat Treatment
Stress relieve where called up by the design code.
6. NDT & Hydrotest
Radiograph the joint, then pressure-test the completed line.
Buying In Bulk For A Pipeline Project?Send your BOQ – factory price, MTC 3.1, dispatch same week.
Chemical Composition Of ASME SA860 WPHY Fittings
WPHY 42
- Carbon (C): ≤ 0.26%
- Manganese (Mn): 1.15–1.65%
- Phosphorus (P): ≤ 0.030%
- Sulphur (S): ≤ 0.030%
- Silicon (Si): 0.15–0.50%
- Niobium (Nb): ≤ 0.05%
- Vanadium (V): ≤ 0.08%
- Titanium (Ti): ≤ 0.04%
- Ni+Cr+Mo+Cu (sum): ≤ 1.00%
- Carbon Equivalent (CE): ≤ 0.42
WPHY 46
- Carbon (C): ≤ 0.26%
- Manganese (Mn): 1.15–1.65%
- Phosphorus (P): ≤ 0.030%
- Sulphur (S): ≤ 0.030%
- Silicon (Si): 0.15–0.50%
- Niobium (Nb): ≤ 0.05%
- Vanadium (V): ≤ 0.08%
- Titanium (Ti): ≤ 0.04%
- Ni+Cr+Mo+Cu (sum): ≤ 1.00%
- Carbon Equivalent (CE): ≤ 0.42
WPHY 52
- Carbon (C): ≤ 0.26%
- Manganese (Mn): 1.15–1.65%
- Phosphorus (P): ≤ 0.030%
- Sulphur (S): ≤ 0.030%
- Silicon (Si): 0.15–0.50%
- Niobium (Nb): ≤ 0.05%
- Vanadium (V): ≤ 0.08%
- Titanium (Ti): ≤ 0.04%
- Ni+Cr+Mo+Cu (sum): ≤ 1.00%
- Carbon Equivalent (CE): ≤ 0.42
WPHY 56
- Carbon (C): ≤ 0.26%
- Manganese (Mn): 1.15–1.65%
- Phosphorus (P): ≤ 0.030%
- Sulphur (S): ≤ 0.030%
- Silicon (Si): 0.15–0.50%
- Niobium (Nb): ≤ 0.05%
- Vanadium (V): ≤ 0.08%
- Titanium (Ti): ≤ 0.04%
- Ni+Cr+Mo+Cu (sum): ≤ 1.00%
- Carbon Equivalent (CE): ≤ 0.42
WPHY 60
- Carbon (C): ≤ 0.26%
- Manganese (Mn): 1.15–1.65%
- Phosphorus (P): ≤ 0.030%
- Sulphur (S): ≤ 0.030%
- Silicon (Si): 0.15–0.50%
- Niobium (Nb): ≤ 0.05%
- Vanadium (V): ≤ 0.08%
- Titanium (Ti): ≤ 0.04%
- Ni+Cr+Mo+Cu (sum): ≤ 1.00%
- Carbon Equivalent (CE): ≤ 0.42
WPHY 65
- Carbon (C): ≤ 0.26%
- Manganese (Mn): 1.15–1.65%
- Phosphorus (P): ≤ 0.030%
- Sulphur (S): ≤ 0.030%
- Silicon (Si): 0.15–0.50%
- Niobium (Nb): ≤ 0.05%
- Vanadium (V): ≤ 0.08%
- Titanium (Ti): ≤ 0.04%
- Ni+Cr+Mo+Cu (sum): ≤ 1.00%
- Carbon Equivalent (CE): ≤ 0.42
Mechanical Properties Of ASTM A860 WPHY Carbon Steel Pipe Fittings
Global ASTM A860 WPHY Fittings Supplier in India delivering cutting-edge solutions with enhanced protective properties.
| Grade | Yield Strength Min | Tensile Strength | Elongation (Round) | Elongation (Rect.) |
|---|---|---|---|---|
| WPHY 42 | 42 ksi / 290 MPa | 60–85 ksi / 415–585 MPa | 25% | 32% |
| WPHY 46 | 46 ksi / 315 MPa | 63–88 ksi / 435–605 MPa | 25% | 32% |
| WPHY 52 | 52 ksi / 360 MPa | 66–91 ksi / 455–625 MPa | 25% | 32% |
| WPHY 60 | 60 ksi / 415 MPa | 75–100 ksi / 515–690 MPa | 20% | 28% |
| WPHY 65 | 65 ksi / 450 MPa | 77–102 ksi / 530–705 MPa | 20% | 28% |
| WPHY 70 | 70 ksi / 485 MPa | 80–105 ksi / 550–725 MPa | 20% | 28% |
Monthly Delivery Of ASTM A860 WPHY Fittings In Below Countries
| Export to | Continent | Shipping Time |
|---|---|---|
Nigeria |
Africa | 20 Days |
Algeria |
Africa | 18 Days |
Iraq |
Middle East | 12 Days |
USA |
North America | 38 Days |
Comparing WPHY Grades For A New Pipeline?Send your service conditions – we recommend the right grade & schedule.
HSN Code Of Carbon Steel A860 Fittings
HSN Heading
7307
Tube or pipe fittings of iron or steel
A860 Fitting Sub-Heading
7307 93 90
Butt welding fittings, other
GST Rate
18%
Standard rate on carbon steel fittings
Typical MOQ
No Minimum
Trial lots to full container loads
Application Of ASTM A860 WPHY High-Strength Fittings
Cross-Country Oil & Gas Pipelines
Compressor & Pumping Stations
City Gas Distribution Networks
Gas Gathering & Metering Stations
Refinery Transfer Lines
LNG & Regasification Terminals
Offshore Riser & Subsea Tie-Ins
Water & Slurry Transmission Lines
ASTM A860 Fittings Testings
Reliable ASTM A860 WPHY Fittings Supplier in India with a reputation for precision, quality, and endurance.
Material Testing
PMI & Charpy impact test on every heat
Test Certificates
MTC 3.1 issued with heat traceability
Documentation
Packing list, invoice & origin certificate
Export Packaging
Bevel-protected & crated for sea freight
ASTM A860 WPHY Butt Welding Fittings Documentation
Mill Test Certificate 3.1
Chemistry & mechanical results traced to heat number
Every Order
Radiography Report
Weld integrity check for electric-fusion-welded fittings
On Request
Charpy Impact Test Report
−46°C toughness data for base & weld metal
On Request
Certificate Of Origin
For customs clearance & import duty processing
Export Orders
ASTM A860 WPHY vs ASTM A234 WPB Fittings
ASTM A234 WPB Fitting
- 35 ksi / 241 MPa minimum yield (fixed)
- Not matched to a specific pipe grade
- General piping & utility service
- No mandatory impact testing
ASTM A860 WPHY Fitting
- 42–70 ksi selectable minimum yield
- Yield matched to API 5L pipe grade
- High-pressure gas & oil transmission
- Charpy impact tested at −46°C
Pressure Rating Of Carbon Steel A860 Fittings
| Nominal Pipe Size | Wall Thickness* | ** Working Pressure– lbs per square inch at the Fahrenheit Temperature Indicated | |||
|---|---|---|---|---|---|
| -20° to 650° | 700° | 750° | *** 800° | ||
| 16 | .375 | 495 | 473 | 427 | 356 |
| 2 | .154 | 900 | 861 | 777 | 648 |
| 6 | .280 | 840 | 803 | 725 | 604 |
| 30 | .375 | 265 | 254 | 229 | 190 |
| 42 | .375 | 189 | 181 | 163 | 136 |
| 3 | .216 | 1095 | 1047 | 945 | 788 |
| 1 1/4 | .140 | 1065 | 1019 | 919 | 766 |
| 1/2 | .109 | 1695 | 1621 | 1463 | 1220 |
| 12 | .375 | 630 | 602 | 543 | 453 |
| 48 | .375 | 165 | 158 | 143 | 118 |
| 4 | .237 | 975 | 932 | 841 | 702 |
| 24 | .375 | 330 | 315 | 284 | 237 |
| 1 | .133 | 1575 | 1506 | 1359 | 1134 |
| 18 | .375 | 450 | 430 | 388 | 354 |
| 3/4 | .113 | 1455 | 1392 | 1256 | 1046 |
| 8 | .322 | 765 | 731 | 660 | 550 |
| 20 | .375 | 405 | 387 | 349 | 291 |
| 14 | .375 | 570 | 545 | 492 | 410 |
| 2 1/2 | .203 | 1215 | 1162 | 1048 | 874 |
| 36 | .375 | 220 | 198 | 178 | 148 |
| 5 | .258 | 885 | 846 | 764 | 637 |
| 3 1/2 | .226 | 1020 | 975 | 880 | 734 |
| 10 | .365 | 720 | 688 | 621 | 518 |
| 1 1/2 | .145 | 1005 | 960 | 867 | 723 |
Need WPHY Fittings To Your Grade Or Wall Schedule?Send drawing or MTO – factory price within 24 hours.
Frequently Asked Questions On ASTM A860 WPHY Fittings
What is an ASTM A860 WPHY fitting used for?
High-pressure oil and gas transmission pipelines, compressor stations and metering systems.
What does WPHY mean?
Wrought Pipe High Yield – the number after WPHY is the minimum yield strength in ksi.
What is the HSN code for carbon steel A860 fittings?
Carbon steel butt-welding fittings fall under HSN 7307 93 90.
Is hydrostatic testing mandatory for A860 fittings?
No, ASTM A860 does not mandate hydrotest at the mill; the installed system is tested per the piping code.
What is the minimum order quantity?
Ganpat Industrial supplies from trial lots to full container loads – there is no fixed minimum on standard NPS & grade combinations.
We Collaborate With Traders In The Following Country
| Saudi Arabia | Oman | UAE | South Africa | Nigeria |
|---|---|---|---|---|
| USA | Kenya | Algeria | Tanzania | Angola |
| Ethiopia | Ghana | Zambia | Morocco | Gabon |
| New South Wales | Egypt | Mozambique | – | Tunisia |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA