Why HVAC & Refrigeration Buyers Pick Our Copper Male Connectors
Heat Conductive
About 339 W/m·K for fast heat transfer.
Oxygen-Free Option
C10200 grade for clean, gas-tight lines.
3/8″ To 2″ Tube OD
NPT, BSPP, UNF and metric male ends.
Thread Gauged
Every port checked go / no-go.
EN 10204 3.1 MTC
Heat number printed on each lot.
Copper Tube to Male Fittings At A Glance
- 1Range: Male Connector, Branch Tee, Run Tee, Elbow,
Bulkhead - 2Tube Size: 3/8″ To 2″ (9.53 To 50.80
mm) - 3Standards: ASTM B68, ASTM B280, ASME SB68, DIN
1786 - 4Grade: UNS C12200 (Cu-DHP) · UNS C10200
(Cu-OF) - 5Threads: NPT, BSPP, BSPT, UNF, Metric
- 6Certificate: EN 10204 3.1 / 3.2
Copper Male Fittings join soft tube to threaded ports without any brazing. ASTM B68 Copper Male Fittings carry mill test certificates with every lot. Copper Swagelok Male Fittings are dimensionally checked against your drawing before dispatch. Parker Copper Male Fittings follow the same thread and tube OD pattern. Copper Male Elbow and tee stock leaves our Mumbai warehouse within days. Copper Tube To Male Fittings suit HVAC, refrigeration and oxygen-clean instrument lines.
Mumbai · Copper Fittings Exporter
Leak-Free Copper Male Connectors, Tees & Elbows Made To Your Drawing
Weeping joints waste refrigerant and stop plants. As a trusted Copper Tube to Male
Fittings Supplier in India, we ship every connector, tee, elbow and bulkhead with heat traceability.
- ✓ISO 9001:2015
- ✓EN 10204 3.1 MTC
- ✓ASTM B68 / B280
- ✓Third-Party Inspection
- ✓Ready Stock
Thermal Conductive ASTM B68 Copper Male Fittings Supplier in India with BSPP & UNF Thread
Copper Tube to Male Fittings Specification
ASTM B68 Copper Male Fittings Size
- Seamless bright annealed tube
- Pressure grade to ASME SB68
- 3/8″ to 2″ ready stock
ASME SB68 Copper Male Connector NPT Thread
- Tapered NPT male thread
- BSPP / UNF on request
- Ferrule or braze tube end
Copper UNS C12200 Male Branch Tee Test
- Branch outlet with male thread
- Phosphorus-deoxidised Cu-DHP
- Brazes cleanly, no cracking
Copper Swagelok Male Fittings Inspection
- Drawing cross-check
- Catalogue part numbers matched
- Never mix ferrule makes
Copper Ferrule Fitting Male Run Tee Dimension
- Run tee with male port
- Ferrule and nut included
- Tube OD 3/8″ to 2″
Copper Male Elbow Types
- 90° and 45° options
- Thread gauged
- Leak tested
Copper Male Connector NPT Metric Series Size Chart
| Tube OD (in) | Tube OD (mm) | Male NPT (in) | NPT TPI | Male BSPP | BSPP TPI |
|---|---|---|---|---|---|
| 3/8 | 9.53 | 1/4, 3/8 | 18 / 18 | G1/4, G3/8 | 19 / 19 |
| 1/2 | 12.70 | 1/4, 3/8, 1/2 | 18 / 18 / 14 | G1/4, G3/8, G1/2 | 19 / 19 / 14 |
| 5/8 | 15.88 | 3/8, 1/2 | 18 / 14 | G3/8, G1/2 | 19 / 14 |
| 3/4 | 19.05 | 1/2, 3/4 | 14 / 14 | G1/2, G3/4 | 14 / 14 |
| 1 | 25.40 | 3/4, 1 | 14 / 11.5 | G3/4, G1 | 14 / 11 |
| 1-1/4 | 31.75 | 1, 1-1/4 | 11.5 / 11.5 | G1, G1-1/4 | 11 / 11 |
| 1-1/2 | 38.10 | 1-1/4, 1-1/2 | 11.5 / 11.5 | G1-1/4, G1-1/2 | 11 / 11 |
| 2 | 50.80 | 1-1/2, 2 | 11.5 / 11.5 | G1-1/2, G2 | 11 / 11 |
Thread Options For Copper Male Fittings
Thread 01
NPT (Taper)
60° angle, 1:16 taper, ASME B1.20.1
Thread 02
BSPP (G)
Parallel 55°, seals on washer, ISO 228-1
Thread 03
BSPT (R)
Tapered 55°, seals on thread, ISO 7-1
Thread 04
UNF / Metric
60° straight thread with O-ring seal
Various Types Of Copper Tube To Male Fittings
We as a Copper Tube to Male Fittings Manufacturer in India for drawing-based jobs.
Copper Male Connector NPT Metric Series
Metric Series
Copper Ferrule Fitting Male Run Tee
Run Tee
Copper UNS C12200 Male Branch Tee
Branch Tee
ASME SB68 Copper Male Connector NPT
NPT
ASTM B280 Copper Male Elbow
Elbow
Copper DIN 1786 Male Bulkhead Connector
Bulkhead
ASTM B280 Copper Tube to Male Tube Fittings
Tube To Male
Copper DIN 1786 Male Fittings
DIN 1786
Key Features Of Copper Male Fittings For Tube Joints
Fast Make-Up
No torch, no flux on site.
Leak-Tight Seal
Ferrule grips the tube wall.
Heat Conductive
High thermal transfer metal.
Corrosion Resistant
Stable in water and refrigerants.
Antimicrobial Surface
Copper limits bacterial growth.
Vibration Tolerant
Soft tube absorbs line movement.
Thread Gauged
Go / no-go on every port.
Fully Recyclable
Scrap value stays high.
Heat Traceable
Heat number on MTC.
Oxygen-Clean Pack
Degreased, capped, bagged.
Need brazed ends or a special thread?Share the port details; we cut male ends to match your line.
Weekly Delivery of Copper Tube to Male Fittings in below countries
| Export to | Continent | Shipping time |
|---|---|---|
Morocco |
Africa | 45 Days |
Peru |
South America | 45 Days |
Algeria |
Africa | 45 Days |
Bahrain |
Asia | 9 Days |
Copper UNS C12200 Male Branch Tee Testing Methods
XRF / PMI Check
Cu 99.9% min confirmed
Eddy Current (ASTM E243)
Tube wall flaws screened
Hydrostatic Test
Pressure hold, no drop
Pneumatic Leak Test
Zero bubbles at test pressure
Flaring / Expansion Test
Ductile, no splits
Thread Gauging
NPT L1 / L2, BSPP go / no-go
Pressure Rating Chart For ASTM B280 Copper Tube to Male Fittings
Tube OD 3/8″
1,026 psi
0.030″ wall · 70.7 bar
Tube OD 1/2″
890 psi
0.035″ wall · 61.4 bar
Tube OD 5/8″
809 psi
0.040″ wall · 55.8 bar
Tube OD 3/4″
704 psi
0.042″ wall · 48.5 bar
Tube OD 7/8″
644 psi
0.045″ wall · 44.4 bar
Tube OD 1-1/8″
553 psi
0.050″ wall · 38.1 bar
Tube OD 1-3/8″
496 psi
0.055″ wall · 34.2 bar
Tube OD 2-1/8″
406 psi
0.070″ wall · 28.0 bar
Calculated for ASTM B280 annealed C12200 tube at room temperature using the ASME B31.5
formula with S = 6,000 psi (41 MPa). Fitting body, thread and temperature can lower the final rating.
ASTM B68 Copper Tube To Male Fittings Chemical Composition
ASME SB68 Copper Male Connector NPT Mechanical Properties
Tensile Strength
205 MPa min
30 ksi
Yield Strength
62 MPa min
9 ksi
Elongation (Typical)
45%
Annealed O60
Elastic Modulus
117 GPa
17 x 10⁶ psi
Cannot find your tube size or thread?Send a sketch or sample; our team replies with a drawing and
price.
Copper DIN 1786 Male Fittings Equivalent Material Grades
USA
- UNS C12200 (Cu-DHP)
- ASTM B68 / B280
- UNS C10200 (Cu-OF)
Germany / EU
- CW024A · W.Nr 2.0090
- DIN 1786 · EN 12735-1
- Oxygen-free: CW008A
Japan
- JIS C1220
- JIS H3300 tube
- Oxygen-free: JIS C1020
United Kingdom
- C106 (Cu-DHP)
- BS 2871 tube
- Oxygen-free: C103
Buy DIN 1786 Male Bulkhead Connector in 3/8" to 2" Size with Oxygen Free Quality for HVAC &
Refrigeration Use
Application Industries For Copper Ferrule Fitting Male Run Tee
HVAC Units
Refrigeration Plants
Medical Gas Lines
Oxygen Service Lines
Instrument Panels
Gas Chromatography
Solar Water Heaters
Lube Oil Systems
Surface Finish Options For Copper Male Elbow
Finish 01
Bright Annealed
Clean bore, soft temper
Finish 02
Oxygen Cleaned
Degreased, capped, bagged
Finish 03
Tin Plated
Matte shield, on request
Finish 04
Nickel Plated
Bright, wear-tough, on request
Brass Vs Copper Tube To Male Fittings: Which One To Buy?
Copper Male Fittings
- Top conductivity, about 339 W/m·K
- Same metal as copper tube
- No zinc, no dezincification
- Oxygen-clean ready
Brass Male Fittings
- Harder for repeat make-up
- Often lower metal cost
- Excellent machinability
- Wide catalogue range
Monthly Delivery of Copper Tube to Male Fittings in below countries
| Export to | Continent | Shipping time |
|---|---|---|
Qatar |
Asia | 7 Days |
Egypt |
Africa | 18 Days |
Netherlands |
Europe | 30 Days |
Kuwait |
Asia | 10 Days |
Copper Male Fittings Price In India: What Decides The Rate
Get Today’s Copper Fittings PriceSend your drawing to a Copper Tube to Male Fittings
Supplier in India that replies the same day.
HSN Code & GST For Copper Tube Male Fittings
HSN Code
7412 10 00
Fittings of refined copper
GST Rate
18%
Domestic supply
Export Supply
Zero-Rated
Under LUT, IGST refund route
Invoice
Heat No. Linked
Matches the MTC
DIN 1786 Male Bulkhead Connector Test Certificates
EN 10204 3.1 Test Certificate
Chemistry and mechanicals, heat-wise
Every Lot
EN 10204 3.2 Inspection Report
Witnessed by your nominated inspector
On Request
Leak & Thread Gauge Report
Pressure and go / no-go results
Included
Packing List & Invoice
HSN, heat number and net weight
Export Ready
Certificate Of Origin
Chamber attested copy
On Request
Copper Tube to Male Fittings FAQs
Which sizes do Copper Male Connector NPT Metric Series fittings cover?
Tube OD from 3/8 inch to 2 inch, plus metric sizes, with NPT or BSPP.
What decides ASTM B68 Copper Male Fittings price per piece in India?
LME copper rate, tube OD, wall, thread type and order quantity decide the price.
What is the HSN code for Copper Male Elbow?
Refined copper tube fittings fall under HSN 7412 10 00 with eighteen percent GST.
Do DIN 1786 Male Bulkhead Connector orders include test certificates?
Yes, every lot ships with an EN 10204 3.1 certificate showing chemistry and mechanicals.
Is oxygen-clean Copper UNS C12200 Male Branch Tee available for refrigeration lines?
Yes, degreased and capped pieces are supplied on request for oxygen and refrigerant service.
Explore Nearby Locations for the Quickest Delivery Options
| Morocco | Kenya | Gabon | Houston | Dubai | Tunisia |
| Abu Dhabi | South Africa | Nigeria | Mozambique | USA | Oman |
| Saudi Arabia | Riyadh | Dammam | Al-khobar | UAE | Al Jubail |
| Angola | Ethiopia | Egypt | Zambia | Ghana | Tanzania |
| New South Wales | Indiana | Texas | California | Algeria | Carolina |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA