ASTM A182 Duplex Steel UNS S31803 / S32205 Nipple, ANSI B 16.11 Duplex Steel UNS S31803 / S32205 Hexagon Reducing Nipple, UNS S31803 / S32205 Hexagoan Nipple Supplier and Manufacturer In Mumbai, India.

Duplex Steel UNS S31803 / S32205 One End Threaded Nipple, Duplex Steel UNS S31803 / S32205 Both End Threaded Nipple Exporter, Duplex Steel UNS S31803 / S32205 Nipple, Duplex Steel WERKSTOFF NR. 1.4462 Nipple Exporter in India.

Duplex Steel S31803 / S3220 NippleGanpat Industrial Corporation is one of the prominent exporting house and seller of Duplex Steel S31803 / S32205 Nipple, which should be allowed to cool to below 300 Degree F between welding passes. Whenever hot forming is done, Duplex Steel S31803 Hexagon Reducing Nipple should be followed by a full solution anneal at 1900 Degree F minimum and rapid quench to restore phase balance, toughness, and corrosion resistance. Stress relieving is not required or recommended; however, if it must be performed, Duplex S32205 Hexagon Nipple should receive a full solution anneal at 1900 Degree F minimum, followed by rapid cooling or water quenching. Stress relief treatments at any lower temperature for Duplex S31803 One End Threaded Nipple carry the risk of precipitation of detrimental intermetallic or non – metallic phases. As with all stainless steels, such as for Duplex Steel S32205 Both End Threaded Nipple, good joint preparation, alignment, and cleaning are essential for good quality welds. Pre – heating of Duplex Steel S31803 Concentric Swaged Nipple is not necessary or desirable unless it is used only to prevent condensation, or in certain unusual cases involving connecting very light sections to very heavy sections. Hot cracking is not impossible but is much less likely to occur with Duplex Steel S32205 Eccentric Swaged Nipple than with austenitic materials. Weld zones in Duplex S32205 Nipple should be clean before welding and well shielded by inert gas, typically dry argon, during welding.

ANSI B 16.11 Concentric Swaged Nipple, Duplex Steel UNS S31803 / S32205 Eccentric Swaged Nipple, Duplex Steel S31803 / S32205 Hex Nipple, Threaded Duplex Steel Hex Nipple Supplier in India.

Duplex Steel UNS S31803 Reducing Nipple

Duplex Steel UNS S31803 / S32205 Nipple
UNS S31803 / S32205 Nipple
Duplex Steel S31803 / S32205 Hexagon Reducing Nipple
UNS S31803 / S32205 Hexagoan Nipple
Duplex Steel One End Threaded Nipple
Duplex Steel UNS S31803 / S32205 Both End Threaded Nipple
Steel UNS S31803 / S32205 Concentric Swaged Nipple
Duplex Steel Nipple

Duplex Steel UNS S31803 / S32205 Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

Other Types of Duplex Steel S31803 / S32205 Nipple

Hexagon Reducing Nipple Duplex Steel UNS S31803 / S32205 Hexagon Reducing Nipple Duplex Steel S31803 / S32205 Hexagon Reducing Nipple
UNS S31803 / S32205 Hexagon Reducing Nipple
UNS S31803 / S32205 Hexagon Reducing Nipple
Duplex Steel UNS S31803 / S32205 Hexagon Reducing Nipple
Duplex Steel WERKSTOFF NR. 1.4462 Hexagon Reducing Nipple
ASME SA182 Duplex Steel Hexagon Reducing Nipple
Hexagoan Nipple Duplex Steel UNS S31803 / S32205 Hexagoan Nipple Duplex Steel S31803 / S32205 Hexagoan Nipple
UNS S31803 / S32205 Hexagoan Nipple
UNS S31803 / S32205 Hexagoan Nipple
Duplex Steel UNS S31803 / S32205 Hexagoan Nipple
Duplex Steel WERKSTOFF NR. 1.4462 Hexagoan Nipple
ASTM A182 Duplex Steel Hexagoan Nipple
One End Threaded Nipple Duplex Steel UNS S31803 / S32205 One End Threaded Nipple Duplex Steel S31803 / S32205 One End Threaded Nipple
UNS S31803 / S32205 One End Threaded Nipple
UNS S31803 / S32205 One End Threaded Nipple
Duplex Steel UNS S31803 / S32205 One End Threaded Nipple
Duplex Steel WERKSTOFF NR. 1.4462 One End Threaded Nipple
ASTM A182 UNS S31803 / S32205 One End Threaded Nipple
Both End Threaded Nipple Duplex Steel UNS S31803 / S32205 Both End Threaded Nipple Duplex Steel S31803 / S32205 Both End Threaded Nipple
UNS S31803 / S32205 Both End Threaded Nipple
UNS S31803 / S32205 Both End Threaded Nipple
Duplex Steel UNS S31803 / S32205 Both End Threaded Nipple
Duplex Steel WERKSTOFF NR. 1.4462 Both End Threaded Nipple
ASME SA182 UNS S31803 / S32205 Both End Threaded Nipple
Concentric Swaged Nipple Duplex Steel UNS S31803 / S32205 Concentric Swaged Nipple Duplex Steel S31803 / S32205 Concentric Swaged Nipple
UNS S31803 / S32205 Concentric Swaged Nipple
Duplex Steel UNS S31803 / S32205 Concentric Swaged Nipple
Duplex Steel WERKSTOFF NR. 1.4462 Concentric Swaged Nipple
ASME 16.11 Duplex Steel Concentric Swaged Nipple
Eccentric Swaged Nipple Duplex Steel UNS S31803 / S32205 Eccentric Swaged Nipple Duplex Steel S31803 / S32205 Eccentric Swaged Nipple
UNS S31803 / S32205 Eccentric Swaged Nipple
UNS S31803 / S32205 Eccentric Swaged Nipple
Duplex Steel WERKSTOFF NR. 1.4462 Eccentric Swaged Nipple
Duplex UNS S31803 / S32205 Eccentric Swaged Nipple

Duplex Steel S31803 / S32205 Nipple Chemical Composition

S31803 / S32205 C N P Si Mn Mo Fe Cr S Ni
1.0 0.03 0.02 2.0 3.0 – 3.5 22.0 – 23.0 0.03 4.5 – 6.5 0.14 – 0.2 Bal

Duplex Steel UNS S31803 / S32205 Nipple Mechanical Properties

S31803 / S32205 Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 116000 , MPa – 800 15 %

Equivalent Grades for UNS S31803 / S32205 Nipple

STANDARD UNS WERKSTOFF NR.
Duplex S31803 S31803 1.4462
Duplex S32205 S32205 1.4462

Duplex Steel UNS S31803 / S32205 Nipple Price List

  • Duplex Steel S31803 / S32205 Nipple
    FOB Price: US $0.001-12 / Piece
  • Duplex Steel UNS S31803 / S32205 Nipple
    FOB Price: US $0.001-12 / Piece
  • Duplex Steel Nipple
    FOB Price: US $0.001-12 / Piece
  • ASTM A182 UNS S31803 / S32205 Nipple
    FOB Price: US $0.001-12 / Piece

Duplex Steel UNS S31803 / S32205 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Duplex Steel S31803 / S32205 Nipple Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ANSI B 16.11 Duplex Steel S31803 / S32205 Nipple Value Added Services

Material Testing:
We at Ganpat Industrial Corporation ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Duplex Steel UNS S31803 / S32205 Nipple Packaging

Duplex Steel Nipple Packing Duplex Steel Nipple Packaging Ganpat Industrial Corporation employs industry leading packaging solutions to protect your order. In addition to several standard size skids and crates, we are also equipped to build custom sizes to meet your specific requirements. Ocean, Air and UPS packaging is also available.

Duplex Steel S31803 / S32205 Nipple Manufacturer Popular Searches

Duplex Steel UNS S31803 / S32205 Hexagoan Nipple, UNS S31803 / S32205 Nipple, Duplex Steel S31803 / S32205 One End Threaded Nipple, Duplex Steel Nipple, Duplex Steel S31803 / S32205 Hexagon Reducing Nipple, Duplex Steel S31803 / S32205 Nipple, Duplex Steel Nipple, ASTM A182 Duplex Steel Nipple, Duplex Steel Nipple Price List, Duplex Steel Both End Threaded Nipple, Nipple, Steel 304 Concentric Swaged Nipple, Duplex Steel Eccentric Swaged Nipple.

Duplex Steel UNS S31803 / S32205 Nipple Supplier

Jamshedpur, Rajkot, Lahore, Geoje-si, Jakarta, Kolkata, Gimhae-si, Vung Tau, Karachi, Istanbul, Manama, Kuwait City, Howrah, Hanoi, Hong Kong, New Delhi, Calgary, Ranchi, Muscat, Hyderabad, Mumbai, Moscow, Kuala Lumpur, Nashik, Busan, Ho Chi Minh City, Singapore, Aberdeen, Algiers, Cairo, Chandigarh, Dallas, Milan, Ahmedabad, Houston, Ulsan, Visakhapatnam, Colombo, New York, Chennai, Toronto, Brisbane, Petaling Jaya, Jaipur, Navi Mumbai, Atyrau, Jeddah, Secunderabad, Kanpur, Gurgaon, Bangkok, Indore, Rio de Janeiro, Montreal, Al Khobar, Riyadh, London, Baroda, Granada, Ankara, Ahvaz, Port-of-Spain, Caracas, Vadodara, Sydney, Thiruvananthapuram, Lagos, Pimpri-Chinchwad, Ernakulam, Nagpur, Coimbatore, Mexico City, Santiago, Abu Dhabi, Dammam, Surat, Ludhiana, Bogota, Courbevoie, Melbourne, Noida, Tehran, Perth, Bengaluru, Haryana, Edmonton, Los Angeles, Faridabad, Seoul, Madrid, Sharjah, Bhopal, Thane, La Victoria, Pune, Dubai, Chiyoda, Doha, Al Jubail

Duplex Steel S31803 / S32205 Nipple Exporter

Poland, Thailand, Gabon, India, Tibet, Australia, Nigeria, Angola, Sri Lanka, Libya, Hong Kong, Mexico, Kuwait, Switzerland, Bhutan, Bulgaria, Nepal, Singapore, China, Kenya, Croatia, Japan, Sweden, Trinidad & Tobago,Tunisia, Egypt, France, Bolivia, Peru, Mexico, United Kingdom, Austria, Portugal, United Arab Emirates, Jordan, Ecuador, Nigeria, Chile, Czech Republic, Philippines, Iran, Chile, Netherlands, Canada, Namibia, Norway, Puerto Rico, Yemen, Romania, Mongolia, Brazil, Costa Rica, South Korea, Finland, Lithuania, Italy, Qatar, Colombia, Russia, Lebanon, Indonesia, Bangladesh, Zimbabwe, New Zealand, Belgium, Taiwan, Poland, Macau, Israel, Serbia, Malaysia, Germany, Venezuela, Afghanistan, Ireland, Slovakia, Kazakhstan, Ghana, Turkey, South Africa, Azerbaijan, Oman, Belarus, Gambia, Saudi Arabia, Ukraine, Morocco, Greece, Spain, Pakistan, United States, Iraq, Iran, Bahrain, Algeria, Argentina, Hungary, Denmark, Estonia, Vietnam