Why Buyers Reorder S32205 Fittings From Us
Heat-Traceable Stock
Every fitting linked to its cast & heat number
PMI + NDT Verified
PMI, dye-penetrant & radiography before dispatch
Fast Global Dispatch
Weekly consolidated shipments to 60+ ports
Mill-Direct Pricing
No middle-agent markup on bulk orders
Custom Fabrication
Non-standard angles, radii & wall thickness on request
ASTM A815 UNS S32205 Pipe Fittings Highlights
- 1Grade: UNS S32205, the nitrogen-enhanced version of S31803, engineered for higher pitting resistance.
- 2Governing Spec: ASTM A815 / ASME SA815, dimensioned to ASME B16.9 & MSS SP-43.
- 3Structure: Balanced ~50% austenite / 50% ferrite microstructure — strength of a duplex, workability of a stainless.
- 4Best Fit: Chloride-rich, high-pressure and sour service lines where 316L falls short.
- 5Form Range: Elbows, tees, reducers, caps, stub ends, collars, crosses and bends.
Or call our Mumbai office: +91 22 6743 7134 • Fast dispatch on ready stock sizes
Ganpat Industries offers a collection of ASTM A815 UNS S32205 pipe fittings for tough duplex piping systems, in the oil & gas chemical and marine industries. Our selection includes the ASTM A815 UNS S31803 elbow, SA815 UNS S31803 tee, A815 S31803 reducer and ASME SA815 S31803 pipe cap. Each of these items is made with tight dimensional limits following ASME B16.9 and MSS SP-43 rules.
Tabler Of Content
- 1ASTM A815 UNS S32205 Pipe Fittings Specification
- 2ASME SA815 S31803 Pipe Cap Pressure Rating Chart
- 3Types of ASTM A815 UNS S32205 Fittings
- 4ASME SA815 UNS S31803 Pipe Bend Price List
- 5ASTM A815 UNS S31803 Elbow Weight Chart
- 6ASTM A815 UNS S32205 Fittings Surface Finishes
- 7Applications of ASTM A815 S31803 Lap Joint Stub Ends
- 8ASTM A815 Gr S31803 Stub End Chemical Composition
- 9SA815 S31803 Collar Mechanical Properties
- 10ASTM A815 UNS S31803 Elbow Equivalent Grades
- 11Thermal Conductivity of A815 UNS S31803 Cross
- 12Difference Between Duplex UNS S32205 vs 316L Fittings
- 13How Are A815 S31803 Reducer Packed for Sea & Air Export?
- 14What Documents Do You Get With Every SA815 UNS S31803 Tee Order?
Duplex Stainless Steel • UNS S32205 / WNR 1.4462
ASTM A815 UNS S32205 Pipe Fittings — Direct-From-Stockyard Supply for Fast, Certified Projects
A single source for ASME SA815 S32205 elbows, tees, reducers, stub ends and bends — seamless & welded, cut from duplex 2205 heats with full EN 10204 3.1/3.2 traceability and same-week dispatch.
- ✓22Cr-5Ni-3Mo Duplex Grade
- ✓PMI + NDT on Every Lot
- ✓ASME B16.9 / B16.28
- ✓MTC EN 10204 3.1
- ✓Exported to 60+ Countries
Hot Formed ASME SA815 S32205 Fittings Manufacturer in India With MTC
ASTM A815 UNS S32205 Pipe Fittings Specification
Each order from our ASTM A815 UNS S32205 Pipe Fittings Supplier in India includes MTC and NDT reports
ASTM A815 UNS S32205 Elbow Size Range
- Seamless: 1/2″ – 24″
- Welded/Fabricated: 1/2″ – 48″
ASTM A815 S32205 Tee Dimensional Standard
- ASME B16.9 (Butt-Weld)
- ASME B16.28 (SR Elbow/Return)
- MSS SP-43 (Light-Wall)
ASTM A815 Gr S32205 Pipe Cap Manufacture Process
- Seamless (hot formed)
- Welded (fabricated segment)
- Full solution annealed
A815 UNS S32205 Reducer Raw Material Origin
- European & Japanese mill billets
- Korean & Indian re-rolled stock
A815 S32205 Stub End End-User Approvals
- Saudi Aramco, ADNOC, KNPC
- SABIC, EIL, PDO Vendor Lists
ASME SA815 UNS S32205 Collar Mill Test Certificate
- EN 10204 3.1 – standard
- EN 10204 3.2 – on request
ASME SA815 S32205 Cross Bend Angle & Radius
- Angles: 22.5°, 30°, 45°, 60°, 90°
- Radius: 1D, 1.5D, 3D, 5D, custom
SA815 UNS S32205 Lap Joint Stub End Surface Finish
- Pickled & passivated
- Mill finish / polished on request
SA815 S32205 Pipe Bend Sample & MOQ
- Free sample on select sizes
- Commercial MOQ – negotiable
Need a formal quotation for A815 S32205 fittings?Send us your size list – pricing back within 24 hours.
ASME SA815 S31803 Pipe Cap Pressure Rating Chart
| ASTM A815 UNS S32205 Pipe Fittings Pressure Ratings (psig) | |||||
|---|---|---|---|---|---|
| Temperature Ratings | Pressure Class | ||||
| Class 150 | Class 300 | ||||
| 2 1/2 – 3 inch. | 1 1/4 – 2 inch. | 1/4 – 1 inch. | |||
| (oC) | (oF) | ||||
| 288 | 550 | – | 300 | 300 | 300 |
| 260 | 500 | – | 385 | 450 | 510 |
| 232 | 450 | – | 475 | 600 | 725 |
| 204 | 400 | – | 560 | 750 | 935 |
| 177 | 350 | 150 | 650 | 900 | 1150 |
| 149 | 300 | 185 | 735 | 1050 | 1360 |
| 121 | 250 | 225 | 825 | 1200 | 1575 |
| 93 | 200 | 265 | 910 | 1350 | 1785 |
| -29 to 66 | -20 to 150 | 300 | 1000 | 1500 | 2000 |
Types of ASTM A815 UNS S32205 Fittings
ASTM A815 UNS S32205 Elbow
90° / 45° LR-SR
ASTM A815 S32205 Tee
Equal / Reducing
A815 UNS S32205 Reducer
Con. / Ecc.
ASTM A815 Gr S32205 Pipe Cap
Dished / Flat
A815 S32205 Stub End
Type A / B
ASME SA815 UNS S32205 Collar
Weld-On
ASME SA815 S32205 Cross
Equal / Reducing
SA815 UNS S32205 Lap Joint Stub End
Rotable Flange
ASTM A815 UNS S32205 Pipe Fittings Delivered Weekly to the Following Countries
| Export to | Countries | Continent | Shipping Time | Ports |
|---|---|---|---|---|
| Nigeria | Africa | 30 Days | Calabar | |
| Indonesia | Asia | 9 Days | Belawan | |
| Colombia | South America | 45 Days | Barranquilla |
ASME SA815 UNS S31803 Pipe Bend Price List
HSN Code (India)
7307
Tube/pipe fittings, stainless steel
Minimum Order
1 Sample Pc.
Commercial MOQ negotiable
Payment Terms
30% Adv.
Balance vs. BL copy / LC at sight
Incoterms
EXW–DDP
FOB, CFR, CIF also quoted
Get a size-wise price sheet todaySend your BOQ – our team replies with FOB & CIF pricing within 24 hours.
Get ASTM A815 Gr S32205 Elbow and Tee At Lowest Price With Mill and Pickled Finish
ASTM A815 UNS S31803 Elbow Weight Chart
| Normal Size | Weight In KG |
|---|---|
| 26 | 124.74 |
| 24 | 107.95 |
| 22 | 89.36 |
| 18 | 57.15 |
| 16 | 45.36 |
| 14 | 36.29 |
| 12 | 28.12 |
| 10 | 19.5 |
| 6 | 5.44 |
| 5 | 3.4 |
| 4 | 2.04 |
| 3 | 1.19 |
| 2 | 0.37 |
| 1 | 0.11 |
ASTM A815 UNS S32205 Fittings Surface Finishes
Mill Finish
As-formed surface straight from solution annealing
Pickled & Passivated
Oxide-free matte grey – standard for A815 fittings
Bright Annealed
Reflective, low-roughness surface, Ra ≤ 0.4µm
No. 4 Polish
Directional satin finish, Ra ≤ 0.8µm
Electropolished
Mirror finish for hygienic & pharma-grade lines
Machined Bevel Ends
Precision-turned weld bevels to ASME B16.25
Applications of ASTM A815 S31803 Lap Joint Stub Ends
Oil & Gas Pipelines
Chemical Processing
Seawater Desalination
Marine & Shipbuilding
Pulp & Paper Mills
Pharmaceutical Plants
Power Generation
Offshore Platforms
ASTM A815 Gr S31803 Stub End Chemical Composition
SA815 S31803 Collar Mechanical Properties
Tensile Strength
620 MPa
90 KSI min
Yield Strength (0.2%)
450 MPa
65 KSI min
Elongation
25%
In 2″ min
Hardness
293 HBW
30 HRC max
Density
7.80 g/cm³
Melting Range
1350–1400°C
Elastic Modulus
200 GPa
Thermal Conductivity
19 W/m·K
ASTM A815 UNS S31803 Elbow Equivalent Grades
As a certified ASTM A815 UNS S32205 Pipe Fittings Manufacturer in India, strict quality control applies to every batch
USA – ASTM / ASME
- ASTM A815 UNS S32205
- ASME SA815 UNS S32205
- ASTM A182 Grade F60 (forged)
- ASTM A240 / A480 (plate)
Germany – WNR / DIN
- WNR 1.4462
- DIN X2CrNiMoN22-5-3
- EN 10253-2 (fittings)
- EN 10088-3 (bar/semis)
Trade & Legacy Names
- Duplex 2205 / SAF 2205
- UR45N (Industeel)
- Base grade: UNS S31803
- JIS-equivalent: SUS329J3L
Monthly Delivery of ASTM A815 UNS S32205 Pipe Fittings to Below Countries
| Export to | Countries | Continent | Shipping Time | Ports |
|---|---|---|---|---|
| Philippines | Asia | 14 Days | Zamboanga | |
| Argentina | South America | 45 Days | La Plata |
Thermal Conductivity of A815 UNS S31803 Cross
68°F / 20°C
8.7 Btu/h·ft·°F
15.1 W/m·K
212°F / 100°C
9.2 Btu/h·ft·°F
15.9 W/m·K
392°F / 200°C
9.8 Btu/h·ft·°F
17.0 W/m·K
572°F / 300°C
10.4 Btu/h·ft·°F
18.0 W/m·K
How Are A815 S31803 Reducer Packed for Sea & Air Export?
Individual VCI Wrapping
Each fitting wrapped in anti-rust VCI paper or poly sleeve to prevent moisture staining
Bevel & End-Face Protection
Plastic end caps on weld bevels so edges stay damage-free during transit
Fumigated Wooden Crates
ISPM-15 certified crates or pallets, strapped and shrink-wrapped for handling
Container Stuffing & Lashing
Load photos shared before container closing; cargo lashed to prevent shift in transit
What Documents Do You Get With Every SA815 UNS S31803 Tee Order?
Ganpat Industries stands as a leading ASTM A815 UNS S32205 Pipe Fittings Supplier in India for duplex piping needs
Mill Test Certificate
EN 10204 3.1 as standard; 3.2 with third-party witness on request
Every Order
PMI Test Report
Positive Material Identification on every heat lot before dispatch
Every Order
Radiography / NDT Report
Weld and body soundness report for fabricated & welded fittings
On Request
Certificate of Origin
Chamber-attested, required for customs clearance in most countries
Every Order
Packing List & Commercial Invoice
Piece count, net/gross weight and HSN code mapped to each carton
Every Order
Frequently Asked Questions
What is the current price of ASTM A815 UNS S32205 fittings?
Price is quoted per kg and moves with nickel & molybdenum surcharges, fitting type and order volume – share your size list for a firm quote.
Is UNS S32205 the same as S31803?
No. S32205 is the nitrogen-controlled, tighter-composition version of S31803, giving more consistent corrosion resistance.
What mill certificate do you provide?
EN 10204 Type 3.1 as standard; Type 3.2 with third-party witness is available on request.
Can you supply non-standard bend angles or radii?
Yes, custom angles, bend radii and wall thickness are fabricated to your isometric drawing.
What is the typical lead time for export orders?
Ex-stock items ship in 3–7 days; custom fabricated lots typically take 3–5 weeks depending on size and quantity.
Do you provide free samples?
Yes, sample pieces are available on select sizes to validate dimensions and finish before a bulk order.
We Collaborate With Traders in the Following Regions
| Regions | Country |
|---|---|
| South Carolina | USA |
| North America | USA, Canada, Mexico |
| South America | Brazil, Argentina, Colombia |
| North Africa | Egypt, Morocco, Algeria |
| West Africa | Nigeria, Ghana, Senegal |
| East Africa | Kenya, Ethiopia, Tanzania |
| Middle East | Saudi Arabia, Iran, Iraq |
| South Asia | India, Pakistan, Bangladesh |
| East Asia | China, Japan, South Korea |
| Melanesia | Fiji, Papua New Guinea |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA