Why Does Ganpat Industrial Corporation Win Bulk Enquiries For Incoloy 800 Angle ?

Angle & Channel Rack Ready

3/4″ to 8″ angle, 80–150mm channel held in Mumbai stock

Heat-Traceable Bars

Every angle bar linked to its cast, tested to ASTM B408 limits

Mill-Direct Pricing

No trading layers – bar stock to cut angle under one roof

Pre-Dispatch Sign-Off

PMI, hardness & dimensional clearance before a single length ships

One PO, Full Range

Equal, Unequal, L-Shape Angle & C, U, Slotted Channel together

Incoloy 800 Angle Aspects

1Angle Size: 3/4″ to 8″ • Channel Base 80–150mm
2Grade: Incoloy 800 • 800H • 800HT • UNS N08800 / N08810 / N08811
3Origin: India • USA • Germany, heat-traceable stock
4Forms: Equal, Unequal, L-Shape Angle & C, U, Slotted, Strut Channel
5Condition: Hot rolled, cold formed, annealed & pickled
6Standards: ASTM B408, ASME SB408, ASTM B164, EN 10095

Request Quote
Whatsapp
Call Us

Or call our Mumbai office: +91 22 6743 7134 • Same-week dispatch on ready stock sizes

Ganpat Industrial Corporation cuts and finishes Incoloy 800/800H/800HT Angles and Channels. We use certified nickel-iron-chromium bar and coil stock at our Mumbai facility. This alloy holds its shape and strength where carbon steel sections warp. It stays stable through repeated furnace cycles and aggressive process atmospheres. Structural framing inside ethylene furnaces needs this durable material. Catalyst baskets and heat-treatment fixtures rely on that same creep and oxidation resistance. A support angle that sags or scales under heat causes major issues. It throws an entire assembly out of tolerance within one production run. Every batch we dispatch carries full heat traceability, dimensional reports and PMI verification. Ganpat Industrial has supplied specialty alloy structurals for over two decades from Mumbai. We reach buyers across India, the UAE, Europe and the wider Middle East. We supply these markets directly from a standing rack inventory.

Mumbai · High-Temperature Nickel Alloy Structural Manufacturer

Incoloy 800 Angle & Channel Built To Hold Its Line Where Heat And Carburising Gas Defeat Carbon Steel Sections

Ganpat Industrial cuts and precision-finishes Incoloy 800, 800H & 800HT Angles and Channels for furnace framing, catalyst support grids and high-temperature process structures – serving ethylene plants, heat-treatment workshops and petrochemical units across India, the UAE and Europe.

✓ISO 9001:2015
✓PED 2014/68/EU
✓NORSOK Certified
✓ASTM B408 Certified
✓Petrofac Approved Vendor

Request Your Quote →
View Specifications

Trusted UNS N08800 Equal Angle From An ISO Certified Manufacturer In India

Specification Of Incoloy 800 Angle

Incoloy 800 Angle Grade

UNS N08800 / N08810 / N08811
WNr 1.4876 / 1.4958 / 1.4859
Alloy 800 / 800H / 800HT
ASTM B408 / ASME SB408

Incoloy 800 Angle Size Range

Angle: 3/4″ – 8″
Thickness: 1/8″ – 5/8″
Channel Base: 80 – 150mm
Custom size on drawing

Incoloy 800 Angle Surface Finish

Pickled & Passivated
Hot Rolled Mill Finish
Cold Drawn Bright Finish
Shot Blasted Finish

Incoloy 800 Angle Packaging

Bundled & Strapped In Lots
Wooden Crate Boxes
Export Sea-Worthy Pack
Cap-Protected Ends

UNS N08800 Angle Origin

Indian Origin
US Origin
European Origin
Traceable To Heat Number

Incoloy 800 Angle Testing Offered

PMI Testing
Hardness Test
Flaring & Flattening Test
Third-Party Inspection

Incoloy 800 Angle Production Route

Hot Rolling / Bar Cutting
Solution Annealing
CNC Saw Cutting
Pickling & Passivation

Incoloy 800H Angle Documentation

Mill Test Certificate 3.1
Material Traceability Report
Packing List
Certificate Of Origin

Incoloy 800 Angle Governing Standard

ASTM B408 / ASME SB408
ASTM B164
EN 10095 / DIN 17752
ASME B18.22.1

Incoloy 800 Angle Bar Dimensions & Weight Chart

Equal angle sizes, per hot-rolled bar reference, weight at Incoloy 800 density 7.94 g/cm³
Size (mm)	Thickness (mm)	Approx Weight (kg/m)	Grade
25 x 25	3	1.13	Incoloy 800
30 x 30	4	1.78	Incoloy 800
40 x 40	5	2.97	Incoloy 800
50 x 50	5	3.78	Incoloy 800H
63 x 63	5	3.90	Incoloy 800H
65 x 65	5	5.02	Incoloy 800HT
80 x 80	8	9.65	Incoloy 800HT
100 x 100	8	12.20	Incoloy 800HT

Incoloy 800 U Channel Dimension Standard

Parallel flange U-channel reference sizes, hot rolled / laser fused, weight in kg/m
Description	Weight (kg/m)	h (mm)	b (mm)	tw (mm)	tf (mm)
C 50x25x5x6	3.95	50	25	5	6
C 75x40x5x7	6.95	75	40	5	7
C 100x50x5x7.5	9.37	100	50	5	7.5
C 125x65x6x8	13.40	125	65	6	8
C 150x75x6.5×10	18.62	150	75	6.5	10
C 200x80x7.5×11	24.77	200	80	7.5	11
C 250x90x9x13	34.86	250	90	9	13
C 300x90x9x12	37.17	300	90	9	12

h = channel depth • b = flange width • tw = web thickness • tf = flange thickness.

Types Of Incoloy 800 Angle We Supply

Incoloy 800 Equal Angle

ASTM B408

Incoloy 800 Unequal Angle

ASME SB408

Incoloy 800 L Shape Angle

Bar Cut

Incoloy 800 Angle Bar

Hot Rolled

Incoloy 800 C Channel

Taper Flange

Incoloy 800 U Channel

Parallel Flange

Incoloy 800 Slotted Channel

Punched

Incoloy 800HT Strut Channel

Unistrut Type

Incoloy 800HT Strut Channel Tolerance

C3 x 4.1

4.1 lb/ft

Flange 1.410″ • web .170″

C6 x 8.2

8.2 lb/ft

Flange 1.920″ • web .200″

C8 x 11.5

11.5 lb/ft

Flange 2.260″ • web .220″

C10 x 15.3

15.3 lb/ft

Flange 2.600″ • web .240″

Leg Length

± 1/8″ standard tolerance

Right Angle

± 2° on the 90° bend

Straightness / Camber

1/8″ in 5 feet of length

Need Incoloy 800 Angle On A Fixed Delivery Date?Share your size list and get factory pricing with MTC 3.1, dispatched the same week.

Request A Quote →

Application Industries For Alloy 800 Angle

Incoloy 800 Angle supplier in India, engineered for structural joints that face repeated thermal cycling and process-gas exposure.

Petrochemical Furnace Framing

Heat-Treatment Basket Support

Ethylene & Steam Cracker Structures

Paper & Pulp Process Equipment

Nuclear Power Plant Internals

Catalyst Support Grid Framing

Pressure Vessel Internal Bracing

Architectural & Kitchen Structural Trim

Find PMI Tested Incoloy 800HT Strut Channel For Furnace Duty, Check Equivalent Grades

Equivalent Grades Of Incoloy Alloy 800 Angle

These standards and designations all describe the same nickel-iron-chromium composition across grades 800, 800H & 800HT.

ASTM / ASME / UNS

ASTM B408 / ASME SB408
UNS N08800 / N08810 / N08811
ASTM B164 (bar reference)

DIN / EN / WNR

Werkstoff Nr. 1.4876 / 1.4958 / 1.4859
EN X10NiCrAlTi32-20
DIN 17752 / DIN 17753

JIS (Japan)

NCF 800 / NCF 800H
NCF 800HT
JIS G4901 Reference

BS (UK)

NA 15 / NA 15(H)
NA 15(HT)
BS 3072 / BS 3076

GOST / AFNOR (Russia / France)

GOST ÉΙ670
AFNOR Z8NC32-21
AFNOR Z8NC33-21

Trade Names

Incoloy® 800 (Special Metals)
Nicrofer 3220
Pyromet 800

Chemical Composition Of UNS N08800 Angle

IronFe

39.50% min

NickelNi

30.00–35.00%

ChromiumCr

19.00–23.00%

ManganeseMn

≤ 1.50%

CopperCu

≤ 0.75%

TitaniumTi

0.15–0.60%

AluminiumAl

0.15–0.60%

SiliconSi

≤ 1.00%

CarbonC

0.05–0.10% (800H/HT)

SulphurS

≤ 0.015%

Mechanical Properties Of Incoloy 800 Angle

Leading Incoloy 800 Angle manufacturer in India, serving furnace fabricators and process skid builders across the globe.

Tensile Strength

≥ 520 MPa

High Load

Yield Strength (0.2%)

≥ 205 MPa

Design Limit

Elongation

≥ 30%

Ductility

Density

7.94 g/cm³

Reference

Melting Point

1385°C

2525°F approx solidus range

Continuous Service Temp

-200 to 815°C

Static load, oxidising atmosphere

Thermal Expansion

14.4 µm/m°C

20–100°C reference band

Hardness

≤ 90 HRB

Annealed condition, shop-floor check

Modulus Of Elasticity

196.5 kN/mm²

28500 ksi reference

Modulus Of Rigidity

78.9 kN/mm²

11444 ksi reference

Stress Relieve Temp

450–470°C

840–880°F, annealed condition

Stress Relieve Time

0.5–1 Hr

Air cooled after holding

Incoloy 800 Angle Delivered Weekly to the Following Countries

Countries	Continent	Ports	Shipping time
UAE	Asia	Mina Rashid	5 days
Thailand	Asia	Laem Chabang	7
Germany	Europe	Bremerhaven	20

Sourcing In Bulk For Your Project?Share your BOQ and get factory pricing with MTC 3.1, dispatched the same week.

Request A Quote →

Incoloy 800 vs 800H vs 800HT Angle

Incoloy 800 / 800H Angle

Carbon capped at 0.10% (800) or 0.05–0.10% (800H)
General corrosion & oxidation resistant grade
Good formability for structural fabrication
Suited to service up to roughly 600°C
Lower cost, widely stocked size range

Incoloy 800HT Angle

Controlled Al + Ti (min 0.85%) for grain stability
Highest creep & rupture strength of the three grades
Specified for continuous service above 600°C
Preferred for ethylene furnace & radiant tube framing
Premium grade, longer mill lead time

HSN Code & GST Rate On Incoloy 800 Angle

India HSN classification for nickel alloy structural sections, indicative reference for buyers
Product	HSN Code	GST Rate
Incoloy 800 Angle Bar	7508	18%
Incoloy 800 Equal / Unequal Angle	75081000	18%
Incoloy 800H/800HT Channel	75082000	18%

MOQ, Lead Time & Custom Cutting Services

MOQ From 1 Length

Trial orders accepted – no bulk minimum on ready stock sizes

Saw Cut To Length

Custom length cutting on angle & channel bar stock

Laser & Water Jet Cutting

Precision profile cutting for fabricated brackets

Ready Stock Dispatch

3–5 working days on standard angle sizes

Custom Mill Order

4–6 weeks for non-stock size or grade on drawing

Need A Fast Turnaround On Custom Cut Lengths?Send your drawing – we quote cutting, testing & dispatch schedule together.

Request A Quote →

Monthly Delivery of Incoloy 800 Angle to Below Countries

Export to	Countries	Continent	Ports	Shipping time
	Saudi Arabia	Asia	Jubail	7
	Italy	Europe	Genoa	30

Test Certificates Of ASTM B408 Incoloy 800 Angle

As an Incoloy 800 Angle supplier in India, every batch is tested and certified with full heat traceability.

Chemical Testing

Every heat checked for Ni, Cr, Fe, Al & Ti against ASTM B408 limits

PMI Testing

Positive Material Identification on every lot to confirm alloy grade

Dimensional Inspection

Leg length, thickness & straightness checked to size chart

Flattening Test

Confirms formability without surface cracking on angle stock

Pitting Resistance Test

Localised corrosion screening on the finished surface

Flaring Test

Verifies edge ductility survives fabrication operations

Intergranular Corrosion (IGC) Test

Confirms carbide precipitation stays within safe limits

Hardness Test

Rockwell / Brinell check confirms grade-matched hardness band

Third-Party Inspection

SGS, BV or TUV witness & certification available on request

ASTM B164 Incoloy 800 Angle Documentation

Commercial Invoice

PO-matched invoice with HSN & GST breakup

Every Order

Certificate Of Origin

For customs clearance & import duty processing

Export Orders

Material Traceability Report

Bar heat number linked to finished angle batch

On Request

Packing List

Itemised length count, weight & bundle breakup

Every Order

Packaging Of Incoloy 800 Angle & Channel

Custom Labelling

PO number, size & heat number tagged on every bundle

Export Sea-Worthy Pack

Moisture-sealed wrap for long-transit sea freight

Bundled & Strapped

Steel strapped bundles with edge protection at ends

Wooden Crate Boxes

For cut lengths, fabricated brackets & container loads

Incoloy 800 Angle Frequently Asked Questions

What sizes are available in Incoloy 800 Angle?

Standard sizes run 3/4″ to 8″, thickness 1/8″ to 5/8″; custom sizes available.

Which grade should I choose – 800, 800H or 800HT?

Use 800 or 800H up to about 600°C; choose 800HT for higher continuous temperatures.

What angle and channel types do you supply?

Equal, unequal and L-shape angles plus C, U, slotted and strut channels.

Do Incoloy 800 Angles come with material test certificates?

Yes, every dispatch includes an EN 10204 3.1 MTC with full heat traceability.

How is Incoloy 800 Angle different from stainless steel angle?

Incoloy 800 keeps strength and resists scaling where stainless steel sections soften and oxidise.

We Collaborate With Traders in the Following Cities

Trading City	Trading City
Texas (USA)	California (USA)
Al Jubail (Saudi Arabia)	Dubai (UAE)
Dammam (Saudi Arabia)	Abu Dhabi (UAE)
Riyadh (Saudi Arabia)	Houston (USA)
Al Khobar (Saudi Arabia)	Indiana (USA)