What Keeps Ganpat Industrial Corporation Ahead In The Incoloy 825 Angle Market ?
Rack-Ready Angle Stock
Equal & unequal sizes held in Mumbai, quoted inside 24 hours
Full Heat Traceability
Every profile linked to its cast, tested to ASTM B425 limits
Direct Mill Pricing
No trading layers – raw billet to finished section under one roof
Pre-Dispatch Clearance
PMI, hardness & dimensional sign-off before a single length ships
One PO, Full Range
Equal Angle, Unequal Angle, C & U Channel on a single shipment
Incoloy 825 Angle Snapshot
- 1Leg Size: 20mm x 20mm to 200mm x 200mm • custom on drawing
- 2Grade: Incoloy 825 • Alloy 825 • UNS N08825 • WNr 2.4858
- 3Origin: India • USA • Europe, heat-traceable stock
- 4Forms: Equal Angle, Unequal Angle, C Channel, U Channel, Slotted & Strut Channel
- 5Condition: Hot rolled, solution annealed & pickled
- 6Standards: ASTM B425, ASME SB425, DIN 17752, ISO 9724
Or call our Mumbai office: +91 22 6743 7134 • Same-week dispatch on ready stock sizes
Ganpat Industrial Corporation rolls and precision-finishes Incoloy 825 Angle and Channel sections. We process certified UNS N08825 billet at our Mumbai facility. This nickel-iron-chromium alloy is strengthened further with molybdenum, copper and titanium. It keeps structural integrity where mild steel and standard stainless sections corrode away. These standard materials often fail within a single service cycle. Sulphuric acid plants and offshore risers require this durable alloy. Flue-gas desulphurisation decks and pickling tank supports lean on that same resistance. The material prevents chloride pitting and stress-corrosion cracking. A structural member that pits or cracks under load is risky. It leaves a support frame unsafe long before scheduled turnaround. Every length we dispatch carries full heat traceability, dimensional inspection and PMI verification. Ganpat Industrial has supplied specialty nickel-alloy structural shapes for over two decades. We operate directly from Mumbai. We reach buyers across India, the UAE, Europe and the wider Middle East. Orders are fulfilled quickly from a standing rack inventory.
Mumbai · High-Nickel Structural Section Manufacturer
Incoloy 825 Angle And Channel Built To Hold A Structure Where Chloride And Acid Attack Defeat Ordinary Steel
Ganpat Industrial rolls and precision-finishes Incoloy 825 (Alloy 825) Angle & Channel for acid plants, offshore structures and pickling equipment – serving EPC contractors, fabrication yards and process-equipment builders across India, the UAE and Europe.
- ✓ISO 9001:2015
- ✓PED 2014/68/EU
- ✓NORSOK Certified Material
- ✓ASTM B425 Certified Mill
- ✓NACE MR0175 Compliant
Ready Stock ASTM B425 Nickel Alloy 825 Angle Supplier in Mumbai
Specification Of Incoloy 825 Angle
Incoloy 825 Angle Grade
- UNS N08825
- WNr 2.4858
- Alloy 825 / Incoloy 825
- ASTM B425 / ASME SB425
Alloy 825 Angle Size Range
- Leg: 20mm – 200mm
- Channel: 40mm – 300mm
- Thickness: 3mm – 20mm
- Custom leg on drawing
ASTM B425 Angle Surface Finish
- Pickled & Passivated
- Hot Rolled Mill Finish
- Shot Blasted Finish
- Machined On Request
Incoloy 825 Angle Length
- 3, 4, 5 & 6 Metre Bars
- Random Mill Lengths
- Custom Cut To Size
- Bundled & Tagged
UNS N08825 Angle Origin
- Indian Origin
- US Origin
- European Origin
- Traceable To Heat Number
Incoloy 825 Channel Testing Offered
- PMI Testing
- Hardness Test
- Dye Penetrant (DPT)
- Third-Party Inspection
Types Of Incoloy 825 Angle & Channel We Supply
Incoloy 825 Equal Angle
L Shape
Incoloy 825 Unequal Angle
L Shape
Incoloy 825 C Channel
DIN 1026
Incoloy 825 U Channel
Open Type
Incoloy 825 Slotted Channel
Perforated
Incoloy 825 Strut Channel
Support Rail
Incoloy 825 Angle Bar
Bar Stock
Incoloy 825 Architectural Angle
Trim Type
ASTM B425 Incoloy 825 Angle Dimensions & Weight Chart
| Nominal Size (mm) | Leg A (mm) | Leg B (mm) | Thickness (mm) | Approx Weight (kg/m) |
|---|---|---|---|---|
| 25x25x3 | 25 | 25 | 3 | 1.15 |
| 40x40x4 | 40 | 40 | 4 | 2.51 |
| 50x50x5 | 50 | 50 | 5 | 3.91 |
| 65x65x6 | 65 | 65 | 6 | 6.13 |
| 75x75x6 | 75 | 75 | 6 | 7.10 |
| 90x90x8 | 90 | 90 | 8 | 11.25 |
| 100x100x10 | 100 | 100 | 10 | 15.45 |
Incoloy 825 Angle Delivered Weekly to the Following Countries
| Export to | Countries | Continent | Ports | Shipping time |
|---|---|---|---|---|
 |
UAE | Asia | Mina Rashid | 5 days |
 |
Thailand | Asia | Laem Chabang | 7 |
 |
Germany | Europe | Bremerhaven | 20 |
Certified UNS N08825 Angle & Channel Supplier Backed By Full Mill Traceability For Acid Plant and Offshore Structures
Application Industries For Incoloy 825 Equal Angle
Incoloy 825 Angle supplier in India, engineered for structural members that face sustained acid, chloride and marine exposure.
Sulphuric & Phosphoric Acid Plants
Offshore Platform Structures
Flue Gas Desulphurisation Decks
Pickling & Descaling Tank Frames
Nuclear Fuel Reprocessing Structures
Pollution Control Equipment
Chemical Process Vessel Supports
Pulp & Paper Digester Framing
Need Incoloy 825 Angle On A Fixed Delivery Date?Share your size list and get factory pricing with MTC 3.1, dispatched the same week.
Incoloy 825 Angle vs Inconel 625 Angle
Incoloy 825 Angle
- Nickel-iron-chromium-molybdenum-copper base
- Best-in-class resistance to sulphuric & phosphoric acid
- Excellent resistance to chloride stress-corrosion cracking
- Preferred for acid plant & pickling equipment framing
- Lower cost than Inconel 625 in bulk section runs
Inconel 625 Angle
- Nickel-chromium-molybdenum-niobium base
- Superior strength from cryogenic to high heat
- Outstanding resistance to pitting & crevice attack
- Preferred for subsea & high-temperature structures
- Higher raw material cost per kilogram
Equivalent Grades Of UNS N08825 Angle
These standards and trade references all describe the same nickel-iron-chromium-molybdenum-copper composition.
ASTM / ASME / UNS
- ASTM B425
- ASME SB425
- UNS N08825
DIN / EN / WNR
- Werkstoff Nr. 2.4858
- DIN 17752 / DIN 17753
- NiCr21Mo
India / BS
- BS 3076 NA16
- Import Std: ASTM B425
- Sourced On Drawing
JIS (Japan)
- NCF 825 (Reference Group)
- JIS G4901 (ref group)
- Incoloy 825 Import Grade
GOST / AFNOR
- GOST ЭП703
- AFNOR NFE30C20DUM
- EN NiCr21Mo
Trade Names
- Incoloy 825® (Special Metals)
- Nicrofer 4221
- Alloy 825
Chemical Composition Of Incoloy 825 L Shape Angle
NickelNi
38.0–46.0%
IronFe
22.0% min
ChromiumCr
19.5–23.5%
MolybdenumMo
2.5–3.5%
CopperCu
1.5–3.0%
TitaniumTi
0.6–1.2%
ManganeseMn
≤ 1.0%
SiliconSi
≤ 0.5%
CarbonC
≤ 0.05%
Mechanical Properties Of Incoloy 825 Angle Bar
Leading Incoloy 825 Angle manufacturer in India, serving acid plants, offshore yards and desalination projects across the globe.
Tensile Strength
≥ 586 MPa
High Load
Yield Strength (0.2%)
≥ 240 MPa
Design Limit
Elongation
≥ 30%
Ductility
Density
8.14 g/cm³
Reference
Monthly Delivery of Incoloy 825 Angle to Below Countries
| Export to | Countries | Continent | Ports | Shipping time |
|---|---|---|---|---|
 |
Saudi Arabia | Asia | Jubail | 7 |
 |
Italy | Europe | Genoa | 30 |
Manufacturing Process Of Incoloy 825 C Channel
Certified Billet Intake
Heat-numbered Alloy 825 billet verified against mill TC
Hot Rolling To Section
Billet rolled through structural passes to leg & web profile
Solution Annealing
Restores ductility & homogenises grain structure
Pickle & Passivate
Removes scale, restores the passive oxide layer
Inspect & Certify
PMI, dimensional & straightness clearance before packing
Sourcing Incoloy 825 Channel In Bulk For Your Project?Share your BOQ and get factory pricing with MTC 3.1, dispatched the same week.
HSN Code, GST Rate & Incoloy 825 Angle Price List
| Particular | Detail |
|---|---|
| HSN Code | 7505 – Nickel Alloy Bars, Rods & Profiles |
| GST Rate | 18% |
| Incoloy 825 Angle Price Basis | Per Kilogram / Per Metric Ton, Ex-Mumbai |
| Incoloy 825 Channel Price Basis | Per Kilogram, Size & Quantity Dependent |
Landed price per length depends on the factors below; share your size list for a firm quote.
Send us your size-wise quantity list and we revert with per-kg pricing within 24 hours, GST and HSN details included on the quotation itself.
Hardness Level Of Incoloy 825 Slotted Channel
Rockwell B
≤ 96 HRB
Standard shop-floor hardness check
Brinell
≤ 200 HB
Bulk hardness on annealed surface
Vickers
≤ 210 HV
Precision micro-hardness reading
Melting Range
1370–1400°C
Reference solidus to liquidus band
Incoloy 825 Equal Angle vs Unequal Angle
Incoloy 825 Equal Angle
- Both legs of identical length
- Balanced load path in both axes
- Preferred for towers, ladders & frames
- Simpler stock keeping for fabricators
- Available 20mm to 200mm leg size
Incoloy 825 Unequal Angle
- One leg longer than the other
- Higher bending resistance on the long axis
- Preferred for brackets & stiffener runs
- Cut to precise leg ratio on drawing
- Custom leg combinations on request
Documentation Provided With Alloy 825 Angle Supply
Commercial Invoice
PO-matched invoice with HSN & GST breakup
Every Order
Certificate Of Origin
For customs clearance & import duty processing
Export Orders
Material Traceability Report
Billet heat number linked to finished angle batch
On Request
Packing List
Itemised bundle count, weight & length breakup
Every Order
NACE MR0175 Certificate
Issued for sour-service & offshore procurement
On Request
Test Certificates Of ASME SB425 Incoloy 825 Angle
As an Incoloy 825 Angle supplier in India, every batch is tested and certified with full heat traceability.
Manufacturer Test Certificate
Every Incoloy 825 Angle & Channel batch is dispatched with an EN 10204 3.1 Mill Test Certificate, covering chemical analysis, mechanical values and heat number, cross-referenced to your purchase order.
Chemical Testing
Every heat checked for Ni, Cr, Fe & Mo against ASTM B425 limits
PMI Testing
Positive Material Identification on every lot to confirm alloy grade
Dimensional Inspection
Leg, web & thickness verified against DIN 1028 tolerances
Flattening & Straightness Test
Confirms formability & camber tolerance on rolled stock
Pitting Resistance Test
Localised corrosion screening on the finished surface
Intergranular Corrosion (IGC) Test
Confirms carbide precipitation stays within safe limits
Radiography Test
100% RT available on request for weld or joint inspection
Third-Party Inspection
SGS, BV or TUV witness & certification available on request
Macro & Micro Test
Grain structure check confirming solution-anneal quality
Incoloy 825 Angle Export Schedule By Country
| Export To | Continent | Shipping Time |
|---|---|---|
Netherlands |
Europe | 22 Days |
Brazil |
South America | 38 Days |
Nigeria |
Africa | 27 Days |
South Korea |
Asia | 16 Days |
Incoloy 825 Angle & Channel Packaging For Export
Custom Bundle Tagging
PO number, size & heat number marked per bundle before loading
Poly Wrap & Strapping
Moisture-sealed bundles strapped for long-transit sea freight
Timber Cradle Bundling
Wooden cradle spacers protect leg edges during handling
Container / Flat-Rack Load
For bulk quantities, oversized lengths & project cargo
Incoloy 825 Angle Frequently Asked Questions
What sizes are available in Incoloy 825 Angle?
Standard leg sizes run 20mm to 200mm; custom lengths and thicknesses available on drawing.
Is Incoloy 825 Angle suitable for sulphuric acid service?
Yes, Alloy 825 resists sulphuric and phosphoric acid across wide concentration and temperature ranges.
What section types do you supply in Alloy 825?
Equal Angle, Unequal Angle, C, U, Slotted and Strut Channel are standard.
Do Incoloy 825 Angle sections come with material test certificates?
Yes, every dispatch includes an EN 10204 3.1 MTC with full heat traceability.
What is the HSN code for Incoloy 825 Angle in India?
Incoloy 825 Angle falls under HSN 7505, attracting 18% GST on domestic supply.
How is Incoloy 825 different from Inconel 625 for structural use?
Alloy 825 offers acid and chloride resistance economically; Inconel 625 adds strength and temperature range.
We Collaborate With Traders in the Following Cities
| Trading City | Trading City |
|---|---|
| Texas (USA) | California (USA) |
| Al Jubail (Saudi Arabia) | Dubai (UAE) |
| Dammam (Saudi Arabia) | Abu Dhabi (UAE) |
| Riyadh (Saudi Arabia) | Houston (USA) |
| Al Khobar (Saudi Arabia) | Indiana (USA) |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA