Why Buyers Trust Our Inconel 600 Round Bar Program First?
PMI Verified N06600 Heats
Nickel & chromium ratio is checked on every heat before rolling begins.
Rolled To ASTM B166 Norms
Correct anneal cycle keeps strength and oxidation resistance fully intact.
Round, Hex, Square & Flat
Every cross-section rolled to your drawing size within one single order.
Heat-Wise Traceability
Every bundle carries a heat number matched to its mill test certificate.
Ready Stock, Quick Dispatch
Fast-moving 10mm to 100mm diameters cut, marked and boxed within days.
Inconel 600 Round Bar Quick Facts
- 1Bar Family: Round, Square, Hex, Flat, Triangle & Threaded Bar
- 2Size Coverage: 3mm to 300mm Diameter, Custom On Drawing
- 3Governing Standard: ASTM B166 / ASME SB166, AMS 5665, UNS N06600
- 4Surface Options: Hot Rolled, Black, Bright & Polished Finish
- 5Common Marking: Inconel® 600, N06600, WNr 2.4816
- 6Service Use: Furnace, Nuclear, Chemical & Food-Grade Shafting
Or call our Mumbai office: +91 22 6743 7134 • Inconel 600 Round Bar batches dispatched with heat-wise MTC
Ganpat Industrial rolls, draws and certifies genuine Inconel 600 Round Bar in India. Buyers who cannot afford a soft, off-chemistry or poorly finished bar inside chemical and food-grade assemblies. Our ASTM B166 UNS N06600 Rod program covers hot rolled, cold drawn, black and bright finish together. Matching Alloy 600 Square Bar and Nickel Alloy 600 Hex Bar sections rolled from the same certified heat. Buyers building to aerospace drawings can also source AMS 5665 Bar stock with full Class 1 and Class 2 mechanical options. Every batch ships with heat-wise Mill Test Certificate 3.1, PMI verification, and export-ready packing .
Mumbai · UNS N06600 Nickel Alloy Bar Exporter
Inconel 600 Round Bar Built for Heat and Corrosion Resistance
Ganpat Industrial forges, rolls and certifies Inconel 600 Round Bar, Nickel Alloy 600 Hex Bar and ASME SB 166 Alloy 600 Flat Bar for buyers who need a bar that holds chemistry, dimension and finish across furnace, nuclear, chemical and food-processing duty in India, the GCC and Europe.
- ✓ISO 9001:2015
- ✓NACE MR0175 / ISO 15156
- ✓ASTM B166, ASME SB166 & AMS 5665
- ✓Mill Test Certificate 3.1
- ✓Third-Party Inspection Approved
Dependable ASTM B166 UNS N06600 Rod Supplier in India, Refer Specification
Inconel 600 Round Bar Specification
Nickel 600 Threaded Bar Thread
- Thread Type: Continuous or partial rolled
- Thread Series: UNC, UNF, BSW & Metric
- Pitch & Length: Custom as per drawing
- Thread Class: Class 2A / 6g fit standard
UNS N06600 Square Black Bar Finish
- Surface Finish: As-rolled mill finish
- Application: Forging blanks and machining
- Section Size: 6mm – 150mm
- Supply Length: Random or cut length
ASME SB166 Inconel 600 Triangle Bar Application
- Section Type: As per customer drawing
- Manufacturing Route: Rolled or machined
- Application: Custom fixture and jig stock
- Documentation: Full chemistry & test report
Nickel 600 Accuracy Bar Uses
- OD Tolerance: Ground to tight OD tolerance
- Use: Ideal for CNC and Swiss-type turning
- Roundness: Consistent roundness across full length
- Straightness: Checked before dispatch
ASTM B166 Inconel 600 Bearing Quality Bar
- Material Quality: Fine grain structure
- Application: Bushing and bearing blanks
- Surface Finish: Centreless ground finish
- Testing: PMI, Ultrasonic, Hardness
Inconel Alloy 600 Rod Testing
- Diameter Range: 3mm – 300mm
- Process: Hot rolled, cold drawn & forged
- Chemistry: Full heat-wise traceable chemistry
- Inspection: PMI tested before final cutting
Buy Polished Finish Nickel Alloy 600 Hex Bar and Bright Bar in Size 3mm-300mm for Extreme Environments
Alloy 600 Square Bar Dimension Chart
We are an Inconel 600 Round Bar Supplier in India with sizes from 3 mm to 300 mm.
| Bar Condition | Diameter Range | Standard Length | Tolerance |
|---|---|---|---|
| Hot Rolled / Black Bar | 20mm – 300mm | 3000 – 6000mm | +3.0 / -0mm |
| Cold Drawn Bar | 3mm – 150mm | 3000 – 6000mm | h9 Precision |
| Bright / Polished Bar | 3mm – 100mm | 3000 – 6000mm | h6 / h8 Ground |
| Forged Large Diameter Bar | 150mm – 300mm | As Per Drawing | +5.0 / -0mm |
Does Inconel 600 Bright Bar Rust Or Corrode?
Chromium Oxide Passive Layer
A stable oxide film keeps the surface free of general rusting
Resists Chloride Cracking
High nickel content resists chloride-ion stress corrosion cracking
Handles Caustic Media
Preferred where carbon steel or 316 bar corrodes or pits fast
Weekly Delivery Of Inconel 600 Round Bar In Below Countries
As a trusted Inconel 600 Round Bar manufacturer in India we provide delivery across these ports.
| Export To | Continent | Port | Shipping Time |
|---|---|---|---|
USA |
North America | Port of Los Angeles | 30-45 Days |
Italy |
Europe | Port of Antwerp-Bruges | 20-54 Days |
UAE |
Asia | Port of Singapore | 11-50 Days |
Maximum Service Temperature Of ASTM B166 UNS N06600 Rod
Continuous Service
~1035°C
Oxidising atmosphere, long duration
Intermittent Service
~1150°C
Short cycle furnace duty
Melting Range
1354 – 1413°C
Reference solidus – liquidus range
Density
8.47 g/cm³
Used for weight chart calculation
Nickel Alloy 600 Round Bar Machining Guideline
Need Machining Advice For A Bulk Order?Share your drawing and we will confirm the right bar condition.
Various Types Of Inconel 600 Round Bar We Supply
As an active bar stock source for OEM, EPC and fabrication buyers, we hold every section listed below on the floor.
ASTM B166 UNS N06600 Rod
Round Section
Alloy 600 Square Bar
Square Section
Nickel Alloy 600 Hex Bar
Hexagon
ASME SB 166 Alloy 600 Flat Bar
Flat Section
Alloy 600 Hot Rolled Bar
As-Rolled
Inconel 600 Bright Bar
Cold Drawn
Inconel 600 Flat Bar
Rectangular
ASTM B166 Inconel 600 Square Bar
Precision Ground
Monthly Delivery Of Inconel 600 Round Bar In Below Countries
| Export To | Continent | Port | Shipping Time |
|---|---|---|---|
Germany |
Europe | Port of Rotterdam | 20-45 Days |
Spain |
Europe | Port of Hamburg | 33-34 Days |
Malaysia |
Asia | Port of Shanghai | 19-23 Days |
Nickel Alloy 600 Round Bar Weight Chart
Approximate weight for Inconel 600 round bar stock – confirm exact figure against your MTC.
10mm Diameter Round Bar
~0.67 kg/m
Inconel 600, hot rolled
20mm Diameter Round Bar
~2.66 kg/m
Inconel 600, hot rolled
40mm Diameter Round Bar
~10.66 kg/m
Inconel 600, cold drawn
80mm Diameter Round Bar
~42.6 kg/m
Inconel 600, forged
Chemical Composition Of Inconel 600 Flat Bar
Certified chemistry applies across Round, Square, Hex, Flat and Threaded Bar – as per ASTM B166 / AMS 5665.
Nickel (Ni)72% Min
72.0 Min
Chromium (Cr)14-17%
14.0-17.0
Iron (Fe)6-10%
6.0-10.0
Carbon (C)0.15% Max
0.15 Max
Manganese (Mn)1.0% Max
1.0 Max
Sulphur (S)0.015% Max
0.015 Max
Silicon (Si)0.5% Max
0.5 Max
Copper (Cu)0.5% Max
0.5 Max
Need The Full Element-Wise Spectro Report?Share your heat number for a complete chemistry printout.
Mechanical Properties Of Nickel Alloy 600 Hex Bar
Hot Finished / Annealed
≥ 552 MPa
80 ksi Min Tensile
Cold Drawn / High-Strength
≥ 655 MPa
AMS 5665 Class 2
Elongation
30 – 40%
Depending On Condition
Hardness (Max)
≤ 95 HRB
Hot Rolled To Cold Drawn
Need A Certified Tensile & Hardness Report?Send size, quantity & condition for a free document review.
Inconel 600 Round Bar Equivalent Material
ASTM / UNS
- ASTM B166 / ASME SB166
- UNS N06600
- ASME SB166 Inconel 600 Reference
WNr / DIN
- Werkstoff NR. 2.4816 Rod
- DIN NiCr15Fe
- DIN 17752 / DIN 17753 Reference
BS / JIS
- BS 3072-3076 NA13
- JIS NCF600
- Often Searched As Alloy 600 Bar
AMS / Aerospace
- AMS 5665 Bar
- AMS 5540 Wire Reference
- Used For Jet Engine Fastener Blanks
Testing Methods For ASTM B166 UNS N06600 Rod
Every finished lot runs through these checks before it clears the dispatch floor.
Spectro Chemical Analysis
Confirms Ni, Cr & Fe against the ordered heat chemistry
Every Heat
Tensile & Yield Test
Verifies strength meets ASTM B166 or AMS 5665 minimums
Every Batch
Rockwell Hardness Test
Confirms hardness stays within the ordered supply condition
Every Batch
Macro & Micro Structure Check
Visual and microscopic scan rules out cracks, laps or seams
On Request
Intergranular Corrosion Test
Grain boundary check per ASTM G28 after heat treatment
On Request
Positive Material Identification (PMI)
Handheld analyser confirms grade on the finished bar body
Every Order
Ultrasonic Test (UT)
Confirms internal soundness on large diameter forged bar
On Request
Tolerance Chart For Alloy 600 Hot Rolled Bar
Hot Rolled Bar
+3.0 / -0mm
20mm – 300mm diameter
Cold Drawn Bar
h9 Class
3mm – 150mm diameter
Ground & Polished Bar
h6 / h8 Class
3mm – 100mm diameter
Peeled Bar
h11 Class
10mm – 200mm diameter
Need A Tolerance Class For A Non-Standard Size?Share bar diameter, grade & end use – we calculate and confirm.
Surface Finish Of Inconel Alloy 600 Bright Bar
Black / As-Forged Bar
Base finish straight off the rolling mill or forging press
Peeled & Turned Bar
Removes mill scale for a clean, consistent outer diameter
Inconel Alloy 600 Bright Bar
Precision cold drawn to a smooth, tight-tolerance bright surface
Centreless Ground & Polished
Mirror or matte polish for visible or sealing-surface duty
Passivated Finish
Chemical passivation strengthens the natural corrosion-resistant oxide film
Application Of Inconel 600 Round Bar
Choose Inconel 600 Round Bar Supplier in India offering for aerospace and power generation equipment.
Furnace Muffle & Retort Fixtures
Nuclear Reactor Control Rod Guide Bar
Chemical Reactor Agitator Shafts
Heat Treatment Basket & Fixture Bar
Ethylene & Pyrolysis Furnace Tube Support
Food & Beverage Processing Equipment Shafts
Marine Exhaust & Sparking Electrode Stock
Power Plant Superheater Support Bar
Not Sure Which Bar Condition Fits Your Process?Share your operating temperature & media – we confirm the right condition.
Inconel 600 Hex Bar Vs Alloy 600 Square Bar – Which To Choose?
Inconel 600 Hex Bar
- Ideal for fastener & nut blank machining
- Lower material waste on round-form components
- Good grip surface for wrench-fit assemblies
- Preferred stock for hex head bolt production
Alloy 600 Square Bar
- Better choice for keyed shaft & frame components
- Simple flat faces suit welding and fabrication
- Easier to clamp for milling operations
- Common stock for custom bracket & fixture work
Inconel Alloy 600 Round Bar Manufacturing Process
Vacuum Induction Melting
Controlled melt locks in the exact N06600 chemistry
Hot Forging / Rolling
Billet is reduced into round bar, Inconel Material Square Bar or hex section
Solution Annealing
High-temperature soak restores ductility and corrosion resistance
Cold Drawing / Peeling
Sizes the bar to precise diameter and bright finish
Straightening & Final Testing
Straightened, PMI checked and certified before dispatch
Want To Confirm Our Mill Process For Your Order?We share process flow & QAP documents on request before production starts.
Inconel 600 Round Bar Price Per Kg – Price Factors
Get A Live Per-Kg Rate TodayOur engineers calculate a fair, transparent rate for every Inconel 600 Round Bar in India enquiry within one working day.
ASME SB 166 Inconel 600 Round Bar Packaging
Wooden Crate / Bundle & Poly Wrap Packing
Grade & Heat Number Tagging
Packing List, Invoice & Certificate Of Origin
FCL / LCL Sea & Air Freight Options
Frequently Asked Questions
What decides the price of Inconel 600 Flat Bar per kg?
Section, diameter, finish and order quantity mainly decide the final per kg price.
What size range does Inconel 600 Round Bar cover?
Standard stock runs 3mm to 300mm diameter, with custom sizes on drawing.
What is the WNr equivalent of Inconel 600 Hex Bar ?
The Werkstoff Nr. 2.4816 code is the accepted DIN equivalent for this alloy.
Does Nickel Alloy 600 Hex Bar need special machining tools?
Standard carbide tooling works fine with slow speed and steady coolant flow.
What is AMS 5665 Bar used for in aerospace work?
It supplies high-strength rod and bar for jet engine fastener and fixture parts.
Check Out Your Nearby Locations For Fastest Deliveries
| Texas (USA) | California (USA) |
| Al Jubail (Saudi Arabia) | Dubai (UAE) |
| Dammam (Saudi Arabia) | Abu Dhabi (UAE) |
| Riyadh (Saudi Arabia) | Houston (USA) |
| Al Khobar (Saudi Arabia) | Indiana (USA) |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA