Alloy 600 Tube To Male Fittings Built For Hot, Salty, High-Pressure Lines
Heat Resistant
Oxidation-resistant to about 1093°C.
Chloride SCC Proof
High nickel resists cracking.
1/8″ To 1″ Tube OD
NPT, BSPT and metric male ends.
PMI On Every Piece
Grade verified before dispatch.
EN 10204 3.1 MTC
Heat number on each lot.
Inconel 600 Tube to Male Fittings Quick Facts
- 1Range: Male Connector, Branch Tee, Run Tee,
Elbow, Bulkhead - 2Tube Size: 1/8″ To 1″ And 3 To
25 mm - 3Standards: ASTM B366, ASME SB366, ASME
B1.20.1 - 4Grade: Inconel 600 · UNS N06600
· W.Nr 2.4816 - 5Ends: NPT, BSPT, Socket Weld, Butt
Weld - 6Certificate: EN 10204 3.1 / 3.2
Inconel 600 Tube Fittings join instrument tubing to threaded ports without welding. ASTM B366 600 Inconel Male Fittings ship with heat-wise traceable test certificates. Alloy 600 Male Fittings handle hot, chloride-rich lines where steel cracks. Parker Inconel 600 Tube to Male Fittings are checked against your drawing before dispatch. Inconel 600 Swagelok Male Fittings requirements are matched to catalogue part numbers. Inconel 600 Male Elbow NPT stock moves from Mumbai within days.
Mumbai · Alloy 600 Fittings Exporter
ASME SB366 Inconel 600 Tube to Male Fittings
Leaking joints at 600°C stop production. As an Inconel 600 Tube to Male Fittings
Supplier in India, we ship connectors, tees, elbows and bulkheads with full heat traceability.
- ✓ISO 9001:2015
- ✓EN 10204 3.1 MTC
- ✓ASTM B366
- ✓Third-Party Inspection
- ✓Ready Stock
Oxidation Resistant UNS N06600 Male Branch Tee Supplier in India with Socket Weld & Threaded End options
Inconel 600 Tube to Male Fittings Specification
ASTM B366 600 Inconel Male Fittings
- Wrought WPNCI fittings
- Pressure service to ASME SB366
- Inconel 600 Tube Fittings in stock
ASME SB366 600 Alloy Male Connector NPT MMCN
- Tapered NPT male thread
- BSPT / BSPP on request
- Ferrule or weld tube end
Inconel UNS N06600 Male Branch Tee
- Branch outlet with male thread
- Seamless or welded body
- Same-alloy ferrules
Inconel 600 Swagelok Male Fittings
- Drawing cross-check
- Catalogue part numbers matched
- Do not mix ferrule makes
Parker Inconel 600 Tube Fittings
- Parker pattern dimensions
- Custom machining on request
- Ferrule set supplied
Inconel GOST МНЖМц 28-2,5-1,5 Male Fittings
- Russian-standard drawings reviewed
- Grade confirmed to UNS N06600
- Chemistry checked before quote
Inconel WERKSTOFF NR. 2.4816 Male Bulkhead Connector
- Through-panel mounting
- Locknut included
- W.Nr 2.4816 traced on MTC
Alloy 600 Ferrule Fitting Male Run Tee
- Run tee with male port
- Ferrule and nut included
- Tube OD 1/8″ to 1″
Inconel 600 Male Elbow NPT
- 90° and 45° options
- PMI and thread gauging
- Hydro / helium leak test
ASME SB366 600 Alloy Male Connector NPT MMCN Size Chart
| Tube OD (in) | Tube OD (mm) | Male NPT (in) | NPT TPI |
|---|---|---|---|
| 1/8 | 3.18 | 1/16, 1/8 | 27 / 27 |
| 1/4 | 6.35 | 1/8, 1/4 | 27 / 18 |
| 3/8 | 9.53 | 1/4, 3/8 | 18 / 18 |
| 1/2 | 12.70 | 1/4, 3/8, 1/2 | 18 / 18 / 14 |
| 3/4 | 19.05 | 1/2, 3/4 | 14 / 14 |
| 1 | 25.40 | 3/4, 1 | 14 / 11.5 |
Inconel 600 Tube Fittings Socket Weld Vs Threaded Male End Options
Option 01
Threaded NPT
Tapered 60°, no welding needed
Option 02
Socket Weld
Tube enters socket, fillet weld
Option 03
BSPT / BSPP
Tapered or parallel on request
Option 04
Butt Weld
Full-penetration weld joints
Inconel 600 Male Elbow, Tee & Connector Types
Our team works as an Inconel 600 Tube to Male Fittings manufacturer in India for
drawing-based jobs.
Inconel WERKSTOFF NR. 2.4816 Male Bulkhead Connector
Bulkhead
Alloy 600 Ferrule Fitting Male Run Tee
Run Tee
Alloy 600 Male Fittings
Male
Inconel 600 Male Elbow NPT
Elbow
Inconel UNS N06600 Male Branch Tee
Branch Tee
600 Inconel Male Connector NPT MCN
MCN
Inconel 600 Male Elbow 45 Degree
45° Elbow
Inconel 600 Male Connector
Connector
Need socket weld or threaded ends?Tell us the line pressure and media; we suggest the right end.
Weekly Delivery of Inconel 600 Tube to Male Fittings in below countries
| Export to | Continent | Shipping time |
|---|---|---|
Spain |
Europe | 30 Days |
Germany |
Europe | 20 Days |
Malaysia |
Asia | 10 Days |
Vietnam |
Asia | 10 Days |
Inconel UNS N06600 Male Branch Tee Testing Methods
PMI Test
Ni, Cr, Fe confirmed
Hydrostatic Test
Pressure hold, zero drop
Helium Leak Test
Tight to mass-spec level
IGC Test (ASTM G28)
Intergranular attack check
Thread Gauging
NPT L1 / L2 plug and ring
Dye Penetrant
Surface cracks screened
Inconel 600 Tube Fittings Chemical Composition
Inconel 600 Tube to Male Fittings Mechanical Properties
Tensile Strength
550 MPa min
80 ksi
Yield (0.2%)
240 MPa min
35 ksi
Elongation
30% min
Annealed tube
Elastic Modulus
207 GPa
30 x 10⁶ psi
Size not listed?Share your drawing; we machine male ends to your tube OD and thread.
UNS N06600 Male Branch Tee Physical Properties
Density
8.47 g/cm³
0.306 lb/in³
Melting Range
1354 – 1413°C
2470 – 2575°F
Service Range
Cryogenic to ~1093°C
Alloy capability; fitting rating varies
Thermal Conductivity
14.9 W/m·K
At 21°C
Inconel 600 Male Elbow NPT Corrosion Cracking Resistance
Alloy 600 Handles
- Chloride stress corrosion cracking
- Caustic and alkali media
- Hot oxidising air and steam
- Organic acids and wet chlorine traces
Look Elsewhere For
- Hot sulfur-bearing gases
- Strong oxidising acids
- Hot concentrated nitric acid
- Seawater crevice service (pick 625)
Inconel 600 Tube to Male Fittings Equivalent Material Grades
USA (UNS)
- UNS: N06600
- ASTM B366: WPNCI
Germany (W.Nr)
- W.Nr: 2.4816
- DIN: NiCr15Fe
France (AFNOR)
- NC15FE11M
Japan (JIS)
- NCF 600
UK (BS)
- NA 14
Buy Alloy 600 Ferrule Fitting Male Run Tee with Chloride Stress Corrosion Cracking Resistance for Heat Treatment & Chemical Processing Use
Application Industries For ASME SB366 Alloy 600 Fittings
Heat Treatment Furnaces
Chemical Processing Plants
Refinery Instrument Lines
Gas Turbine Fuel Lines
Nuclear Power Plants
Aerospace Test Rigs
Caustic Soda Plants
Petrochemical Crackers
Parker Inconel 600 Tube Fittings Price Factors In India
Get Today’s Alloy 600 Fittings PriceSend your drawing to an Inconel 600 Tube to
Male Fittings Supplier in India that replies the same day.
Inconel 600 Male Fittings HSN Code & GST
HSN Code
7507 20 00
Nickel tube or pipe fittings
GST Rate
18%
Domestic supply
Origin
Mumbai, India
Export documents ready
Invoice
Heat No. Linked
Matches MTC
Monthly Delivery of Inconel 600 Tube to Male Fittings in below countries
| Export to | Continent | Shipping time |
|---|---|---|
Saudi Arabia |
Asia | 7 Days |
Thailand |
Asia | 7 Days |
Indonesia |
Asia | 9 Days |
Philippines |
Asia | 14 Days |
Inconel 600 Tube to Male Fittings Ready Stock, MOQ & Payment Terms
MOQ
1 Piece
Samples & bulk both
Stock Items
3 – 5 Days
Standard sizes
Custom Orders
2 – 3 Weeks
Drawing based
Payment
T/T · L/C
Other terms on request
Inconel 600 Tube to Male Fittings FAQs
Which sizes do Inconel 600 Male Connector fittings cover?
Tube OD 1/8 to 1 inch and 3 to 25 mm, with matching NPT ends.
What decides Alloy 600 Male Fittings price per piece?
Nickel rate, tube size, fitting style and order quantity decide price; share drawing for quote.
Does ASME SB366 600 Alloy Male Connector NPT MMCN include MTC?
Yes, every lot ships with an EN 10204 3.1 certificate showing chemistry and mechanicals.
What is the HSN code for Inconel 600 Male Elbow NPT?
Nickel tube fittings fall under HSN 7507 20 00; GST is eighteen percent.
Is there a minimum order for Parker Inconel 600 Tube Fittings?
No fixed minimum; we dispatch single pieces and full container loads on request.
Material Inspection Facilities in the Following Country
| Regions | Country |
|---|---|
| South Asia | India, Pakistan, Bangladesh |
| East Asia | China, Japan, South Korea |
| South Carolina | USA |
| North America | USA, Canada, Mexico |
| South America | Brazil, Argentina, Colombia |
| North Africa | Egypt, Morocco, Algeria |
| West Africa | Nigeria, Ghana, Senegal |
| Middle East | Saudi Arabia, Iran, Iraq |
| Melanesia | Fiji, Papua New Guinea |
| East Africa | Kenya, Ethiopia, Tanzania |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA