What Makes Ganpat Industrial The Preferred Inconel 601 Angle Supplier?

High-Nickel, Mill-Direct

58-63% nickel heats sourced straight from certified mills

One Enquiry, Full Range

Equal • Unequal • Bar-Size • Drilled – all in one PO

Furnace-Grade Certified

ISO 9001 • PED • NORSOK M-630 heats on request

PMI and Heat-Verified

Spectro, hardness and dimensional checked before it ships

Quote In 24 Hours

Ready stock on standard sizes – ships same week

Inconel 601 Angle Overview

  • 1Type: Equal Leg, Unequal Leg, Bar-Size and Structural Angle
  • 2Size Range: Leg 20-200 mm • Thickness 3-25 mm • Length up to 6000 mm
  • 3Common Names: Inconel 601, Alloy 601, Nicrofer® 601, Pyromet® 601
  • 4Standards: UNS N06601, WNR 2.4851, ASTM B166 / B168 / B564, AMS 5715 / 5870
  • 5Finish: Hot Rolled, Pickled and Oiled, Bright Annealed, Shot Blasted
  • 6Origin: Indian origin • European origin • US origin • Heat-traceable
Inconel 601 Angle Specification Diagram
Request Quote
Whatsapp
Call Us

Or call our Mumbai office: +91 22 6743 7134 • Fast dispatch on ready stock sizes

Inconel 601 Angle builds strong structural frames surviving intense thermal load. High aluminium content forms a protective oxide skin resisting spall to 1150C. Standard 300 series stainless steel angles scale and fail quickly there. Ganpat Industrial Corporation supplies precision rolled sawed and drilled angles to size. Custom fabrication directly matches your exact technical drawing specifications without delay. Every single order ships with complete mill certified billet material traceability. We deliver high quality nickel alloy angles across global industrial markets.

Mumbai · Inconel 601 Angle Manufacturer and Exporter India

Inconel 601 Angle Engineered For 1150°C Furnace Duty Where Stainless Angles Scale And Warp

We roll UNS N06601 / WNR 2.4851 Angle for furnaces, incinerators and boiler structurals. Shipped India-wide and to the Middle East.

  • ✓ISO 9001:2015
  • ✓ISO 14001:2015
  • ✓PED Certified
  • ✓NABL Lab Tested
  • ✓Petrofac Approved

 

Get Best Price →
View Specification

 

Alloy 601 H and I Beam Manufacturer in India With Size 3 to 12.31″ or Custom

Inconel 601 Angle Specification

Alloy 601 Angle Material Standard

  • UNS N06601
  • WNR 2.4851
  • ASTM B166 / B168 / B564
  • AMS 5715 / 5870

Nicrofer® 601 Angle and I Beam Testing

  • PMI Testing
  • Spectro Analysis
  • Hardness Test
  • Third-Party Inspection

Inconel Alloy 601 Angle and C Channel Origin

  • Indian Origin
  • European Origin
  • US Origin
  • Traceable To Heat Number

UNS N06601 Angle and Channel Size Range

  • Angle Leg: 20 – 200 mm • Thk 3 – 25 mm
  • Channel Base: 80 – 150 mm • Side 40 – 75 mm
  • Length: 3, 4, 5 or 6 MTR
  • Custom cut sizes on drawing

Pyromet® 601 Angle and H Beam Finish

  • Hot Rolled
  • Pickled and Oiled
  • Bright Annealed
  • Shot Blasted

Inconel 601 Angle, Beam and Chain Supply Form

  • Equal Leg Angle
  • Unequal Leg Angle
  • Bar-Size Angle
  • Cut-To-Length

WNR 2.4851 Angle Physical Properties

  • Density: 8.10 g/cm³
  • Melting Range: 1360-1411°C
  • Non-Magnetic
  • Curie Point: < -196°C

Nickel Alloy 601 Angle and U Channel Welding

  • GTAW / SMAW Weldable
  • Filler: ERNiCrFe-11
  • No PWHT Required
  • Readily Formed and Machined

Nicrofer® 601 Angle and Chain Certifications

  • ISO 9001:2015
  • ISO 14001:2015
  • PED 2014/68/EU
  • NORSOK M-630

UNS N06601 Angle Size and Dimension Chart

Leg 20 to 200 mm and thickness 3 to 25 mm are rolled to EN 10056-1 by our Manufacturer in India

Inconel 601 Angle – Standard Leg, Thickness and Fillet Radius (mm)
Type Designation (A x B mm) Thickness (mm) Root Radius r1 (mm) Toe Radius r2 (mm)
Equal 25 x 25 3 / 5 3.5 1.8
Equal 40 x 40 4 / 5 6 3
Equal 50 x 50 5 / 6 7 3.5
Equal 65 x 65 6 / 8 8 4
Equal 75 x 75 6 / 8 / 10 9 4.5
Equal 100 x 100 8 / 10 / 12 12 6
Equal 150 x 150 10 / 12 / 15 14 7
Equal 200 x 200 15 / 18 / 20 17 8.5
Unequal 40 x 25 4 / 5 6 3
Unequal 65 x 50 5 / 6 8 4
Unequal 75 x 50 6 / 8 8 4
Unequal 100 x 75 8 / 10 10 5
Unequal 125 x 75 8 / 10 11 5.5
Unequal 150 x 90 10 / 12 12 6
Unequal 200 x 100 12 / 15 14 7

Offer Cut to Length UNS N06601 Channel Tested With Tensile and Bend Test At Factory Price

Pyromet® 601 Angle and Channel Price List and HSN Code

 

HSN Heading

7505

Nickel bars, rods, profiles and wire

Angle (Profile) HSN

7505 12 00

Profiles of nickel alloy

GST Rate

18%

Standard rate on nickel-alloy sections

Price Basis

Per Kg, Ex-Mumbai

Factory price on confirmed drawing

 

Inconel 601 Angle price depends on leg size, thickness and testingSend size, quantity and port. Itemised quote the same day.

Get Price List →

Inconel 601 Angle Types

Equal leg, unequal leg, channel, beam and chain profiles all roll from one N06601 heat at our Supplier in India

Inconel 601 Angle Bar
Inconel 601 Angle Bar

Plain L-Section

Alloy 601 Equal Leg Angle
Alloy 601 Equal Leg Angle

Symmetric Legs

UNS N06601 Unequal Leg Angle
UNS N06601 Unequal Leg Angle

Long and Short Leg

WNR 2.4851 Channel Section
WNR 2.4851 Channel Section

U-Shaped Profile

Nickel Alloy 601 U Channel
Nickel Alloy 601 U Channel

Parallel Flange

Inconel Alloy 601 C Channel
Inconel Alloy 601 C Channel

Tapered Flange

Nicrofer 601 I Beam
Nicrofer® 601 I Beam

Narrow Flange

Pyromet 601 H Beam
Pyromet® 601 H Beam

Wide Flange

Your Nickel Alloy 601 Angle Length Is Not A Standard 6 m?Mail the drawing today. Our saw line prices it tomorrow.

Request A Quote →

 

WNR 2.4851 Angle Weight Chart

Approx. Weight Of Inconel 601 Angle (Density 8.1 g/cm³)
Type Size (mm) Thickness (mm) Weight (Kg/Metre) Weight (Kg/6m Length)
Equal 25 x 25 3 1.14 6.85
Equal 40 x 40 4 2.46 14.77
Equal 50 x 50 6 4.57 27.41
Equal 65 x 65 6 6.03 36.16
Equal 75 x 75 8 9.20 55.21
Equal 100 x 100 10 15.39 92.34
Equal 150 x 150 12 27.99 167.94
Equal 200 x 200 20 61.56 369.36
Unequal 40 x 25 4 1.98 11.86
Unequal 65 x 50 6 5.30 31.78
Unequal 100 x 75 8 10.82 64.92
Unequal 150 x 90 10 18.63 111.78
Unequal 200 x 100 12 27.99 167.94

 

Get a live Inconel 601 Angle quote todayFactory price, ready stock, no minimum-order penalty.

Request Quote →

Nickel Alloy 601 Angle Chemical Composition

Per ASTM B168 / UNS N06601

Nickel

58.00-63.00%

Chromium

21.00-25.00%

Iron

Balance

Aluminium

1.00-1.70%

Manganese

≤ 1.00%

Copper

≤ 1.00%

Silicon

≤ 0.50%

Carbon

≤ 0.10%

Sulphur

≤ 0.015%

Inconel Alloy 601 Angle Mechanical Properties

Annealed Condition, Room Temperature

Tensile Strength (MPa)

≥ 552

Load Bearing

Yield Strength (MPa) (0.2%)

≥ 207

Design Limit

Elongation (In 2 In.)

≥ 35%

Ductility

Hardness (Typical)

≤ 100 HRB

Machinability

Inconel Alloy 601 Channel And Beam Needed For A Furnace Rebuild?Send the BOQ and shutdown date. We plan backwards from it.

Request A Quote →

Weekly Delivery Of Incoloy 800 Pipe Fittings To These Countries

Weekly sailings from Mumbai. Transit is port to port, after clearance.

Weekly Dispatch Schedule – Incoloy 800 Pipe Fittings
Country Continent Discharge Port Transit Time
Morocco Africa Casablanca Port 15-33 Days
Peru South America Callao Port 23-55 Days

Monthly Delivery Of Inconel 601 Angle To These Countries

Consolidated monthly loads. Share the discharge port for a firm date.

Monthly Dispatch Schedule – Inconel 601 Angle
Country Continent Discharge Port Transit Time
Bahrain Asia Khalifa Bin Salman Port 9 Days
Algeria Africa Algiers Port 27 Days

Nicrofer® 601 Angle High-Temperature and Pressure Rating

Tensile retention at 1150°C decides the span your frame can hold, verified before dispatch by our Supplier in India

At 400°C / 750°F

85% UTS Retained

Ducting and framing margin

At 600°C / 1110°F

76% UTS Retained

Boiler and superheater duty

At 800°C / 1470°F

44% UTS Retained

Kiln and incinerator zone

Max Continuous Duty

1150°C / 2100°F

Oxidising furnace atmosphere

Pyromet® 601 Angle Thickness and Schedule Chart

Four duty-series: Light, Medium, Heavy and Extra-Heavy. Pick by load, not by schedule

Inconel 601 Angle Thickness Schedule By Duty Series (mm)
Leg Size (mm) Light (L) Medium (M) Heavy (H) Extra Heavy (XH)
25 3 4 5 –
40 3 4 5 6
50 4 5 6 8
65 5 6 8 10
75 5 6 8 10
100 6 8 10 12
125 8 10 12 15
150 10 12 15 18
200 12 15 18 20

Still Weighing Pyromet® 601 Against A Cheaper Grade?Tell us the metal temperature and span. We answer straight.

Request A Quote →

Application Of Nicrofer® 601 Angle and U Channel

Where the frame sits inside the heat, not beside it

Heat-Treatment Furnace Framing

Ethylene Cracker Support Structurals

Waste-To-Energy Incinerator Angles

Boiler and Superheater Brackets

Gas Turbine Combustor Framing

Annealing Furnace Muffle Angles

Catalyst-Bed Support Angles

Radiant Tube Hanger Brackets

Alloy 601 Angle Equivalent Grades

ASTM / ASME
  • B166 (Bar)
  • B168 (Plate)
  • B564 (Forgings)
  • B829 (Pipe)

UNS / AMS
  • N06601
  • AMS 5715
  • AMS 5870

EN / DIN / Werkstoff
  • 2.4851
  • NiCr23Fe
  • DIN 17752
  • EN 10095

JIS
  • NCF 601
  • JIS G4901 / G4902

Trade Names
  • Inconel® 601
  • Nicrofer® 6023 H
  • Pyromet® 601

GOST / Others
  • GOST ΧΝ60ΒΤ (ΕΙ868)
  • BS NA49

UNS N06601 Angle Test Certificate and Documentation

Mill Test Certificate 3.1

EN 10204 3.1, traceable to heat number, per every dispatch

Every Order

NABL Lab Report

Independent chemistry and mechanical test results

On Request

Packing List

Itemised piece count, weight and bundle breakup

Every Order

Certificate Of Origin

For customs clearance and import duty processing

Export Orders

WNR 2.4851 Angle and Beam Export Packaging

1
Bundled and Strapped

Standard bundle packing for small and trial orders

2
Wooden Crate

For bulk quantities and long-length angle

3
VCI / Moisture Wrap

Corrosion-inhibited wrap for long-transit sea freight

4
Custom Labelling

PO number, heat and size marked per buyer requirement

Inconel 601 Angle Frequently Asked Questions

Is Inconel 601 Angle magnetic?

No. Annealed and austenitic, so it stays non-magnetic.

What is the maximum service temperature of Alloy 601 Angle?

Oxidation resistance to 1150°C (2100°F), well past any 300-series angle.

Can UNS N06601 Angle be welded on site?

Yes, GTAW or SMAW with ERNiCrFe-11 filler. No post-weld heat treatment needed.

What is the minimum order quantity for WNR 2.4851 Angle?

One trial cut-length to a full container. Send size and quantity.

Do you supply Nicrofer® 601 Channel, I Beam and Chain with the angle?

Yes. Channel, U Channel, C Channel, I Beam, H Beam and Chain – one heat, one certificate.

Need Inconel 601 Angle Cut, Drilled Or Bent To Your Drawing?

Mumbai manufacturer and exporter. Ready stock and custom cut-lengths.

Send Enquiry Now →

Warehouse Regions of Partner Suppliers

Listed nearest sailing first. Documents are ready before the container is sealed.

Export Regions & Countries Served
Region Countries
South Asia India, Pakistan, Bangladesh
Middle East Saudi Arabia, Iran, Iraq
East Africa Kenya, Ethiopia, Tanzania
East Asia China, Japan, South Korea
North Africa Egypt, Morocco, Algeria
West Africa Nigeria, Ghana, Senegal
Melanesia Fiji, Papua New Guinea
North America USA, Canada, Mexico
South America Brazil, Argentina, Colombia

ganpat industrial corporation

6 Reasons to choose Ganpat Industrial Corporation

  1. Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
  2. Stockholder and importer of Ferrous and non ferrous metals.
  3. Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
  4. Marine grade steel at lowest price in Mumbai.
  5. Compare Price per KG in India and China.
  6. Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA