Why Procurement Heads Shortlist Ganpat Industrial Corporation For Inconel 625 Angle ?
Since 1997
Mumbai forging house and metal stockist
ISO 9001:2015
Certified quality system behind every lot
ISO 14001:2015
Certified environmental management at our works
PED & Petrofac Approved
Accepted for pressure equipment and Petrofac vendor lists
MTC With Every Lot
Heat and test data travel with dispatch
Inconel 625 Angle Aspects
- 1Material Basis: Nickel-chromium-molybdenum-niobium
alloy • UNS N06625 - 2Governing Standard: ASTM B446 / ASME SB446 •
Grade 1 and Grade 2 - 3Werkstoff Nr.: 2.4856 • EN NiCr22Mo9Nb
- 4Condition: Annealed • Solution annealed
- 5Sizes: Angles 20 x 20 to 100 x 100 mm •
Drawing-based sizes on request - 6Forms Supplied: Angle, channel, T beam, W beam and
chains
Ganpat Industrial Corporation has forged and stocked alloys from Mumbai since 1997. Our Inconel 625 Angle range serves marine, chemical and flue gas projects. UNS N06625 brings 58.0% minimum nickel with molybdenum and niobium strengthening. Each ASTM B446 Inconel 625 U Channel follows Grade 1 or Grade 2 limits. Bracing frames and supports use our Inconel 625 Angle Bar in cut lengths. Every lot ships with an MTC for your QA team. Send your size list on WhatsApp or email for a quick quote.
Mumbai · Forger, Stockist & Exporter
Inconel 625 Angle resists seawater pitting and chloride attack.
Buy Inconel 625 Angle from a Mumbai forger. We also supply channels, beams and
chains.
- ✓ISO 9001:2015
- ✓ISO 14001:2015
- ✓OHSAS 18001:2007
- ✓PED Certified
- ✓Petrofac Approved
UNS & Werkstoff
N06625
Werkstoff Nr. 2.4856
Nickel • Chromium
58.0% min • 20.0-23.0%
Mo 8.0-10.0% added
Governing Standard
ASTM B446
Grade 1 and Grade 2
Grade 2 Strength
100 ksi min
40 ksi min yield
Seawater Pitting Resistance ASTM B446 Inconel 625 U Channel Supplier in India with Solution Annealed Condition
Inconel 625 Angle Specification
Check every order against this sheet before you place it.
Material Grade
- Nickel-chromium-molybdenum-niobium alloy
- UNS N06625 / Werkstoff Nr. 2.4856
- Ni 58.0% minimum
Governing Standards
- ASTM B446 / ASME SB446
- AMS 5666 for bar
- ASTM B446 Inconel Alloy 625 Channel
Conditions
- Grade 1: annealed
- Grade 2: solution annealed
- Grade 2 suits creep duty above 593 °C
Angle Forms
- Inconel Equal Leg Angle
- Unequal leg angle
- Hot Rolled Steel 625 Equal Leg Angle
Channel & Beam Forms
- U channel and C channel
- T beam and W beams
- I beam to your drawing
Size Range
- Angles 20 x 20 to 100 x 100 mm
- Thickness 3 to 12 mm
- Length 3 to 6 m or cut pieces
Surface
- Hot rolled, descaled finish
- Pickling on request
Documents
- MTC with every lot
- Chemical and mechanical results
- Third-party inspection on request
Inconel 625 Angle Bar Sizes And Weight Chart
Our Inconel 625 Angle supplier in India desk quotes cut lengths fast.
| Size | Leg | Thickness | Weight (kg/m) |
|---|---|---|---|
| 25 x 25 x 3 | 25 | 3 | 1.19 |
| 25 x 25 x 5 | 25 | 5 | 1.90 |
| 40 x 40 x 4 | 40 | 4 | 2.57 |
| 50 x 50 x 5 | 50 | 5 | 4.01 |
| 65 x 65 x 5 | 65 | 5 | 5.28 |
| 75 x 75 x 6 | 75 | 6 | 7.29 |
| 80 x 80 x 8 | 80 | 8 | 10.26 |
| 100 x 100 x 8 | 100 | 8 | 12.96 |
| 100 x 100 x 12 | 100 | 12 | 19.04 |
Types Of Inconel UNS N06625 Beam
Pick the section that fits your frame, rack or support.
Inconel 625 Angle Bar
L Section
Inconel Equal Leg Angle
Equal Leg
Hot Rolled Steel 625 Equal Leg Angle
Hot Rolled
ASTM B446 Inconel 625 U Channel
U Section
Inconel 625 C Channel
C Section
Inconel 625 T Beam
T Section
625 Inconel W Beams
W Section
Inconel UNS N06625 Beam
Beam
Weekly Delivery of Inconel 625 Angle in below countries:
| Export to | Continent | Shipping time |
|---|---|---|
 Vietnam |
Asia | 10 Days |
 Brazil |
South America | 45-60 Days |
 Qatar |
Asia | 7 Days |
 Egypt |
Africa | 18 Days |
Chemical Composition Of UNS N06625 Angle
The Nickel-Molybdenum-Niobium Chemistry
Heat analysis limits from ASTM B446 for UNS N06625.
NickelNi
58.0% min
ChromiumCr
20.0 – 23.0%
MolybdenumMo
8.0 – 10.0%
Niobium + TantalumNb+Ta
3.15 – 4.15%
IronFe
5.0% max
CobaltCo
1.0% max
CarbonC
0.10% max
Manganese & SiliconMn Si
0.50% max each
Aluminium & TitaniumAl Ti
0.40% max each
Phosphorus & SulphurP S
0.015% max each
Inconel Equal Leg Angle Mechanical Properties As Per ASTM B446
Angles and channels are quoted against these bar limits.
| Grade | Size | Tensile ksi (MPa) | Yield ksi (MPa) | Elong. (%) |
|---|---|---|---|---|
| Grade 1 Annealed | Up to 4 in (102 mm) | 120 (827) | 60 (414) | 30 |
| Grade 1 Annealed | Over 4 to 10 in | 110 (758) | 50 (345) | 25 |
| Grade 2 Solution Annealed | All sizes | 100 (690) | 40 (276) | 30 |
625 Inconel Alloy Anchor Chain Equivalent Grades
Check The Werkstoff Number Before You Order
One grade, many nameplates. Match your drawing callout below.
ASTM • UNS • AMS
- ASTM B446 / ASME SB446
- UNS N06625
- AMS 5666
Werkstoff • EN
- Inconel UNS N06625 Beam
- Werkstoff Nr. 2.4856
- EN NiCr22Mo9Nb
Japan • JIS
- NCF 625
British • BS
- NA 21
French • AFNOR
- NC22DNB4M
Russia • GOST
- Inconel GOST ХН75МБТЮ Beam
- As listed in trade cross-reference tables
Physical Properties Of Hot Rolled Steel 625 Equal Leg Angle
Typical values for design and thermal checks.
Density
8.44 g/cm³
0.305 lb/in³
Melting Range
1290 – 1350 °C
2350 – 2460 °F
Thermal Conductivity
9.8 W/m·K
Room temperature
Thermal Expansion
12.8 µm/m·K
20 to 100 °C
Specific Heat
410 J/kg·K
At 21 °C
Service Range
Cryogenic to 982 °C
Up to 1800 °F
Inconel 625 vs 316L Stainless Steel Angle
Buyers weigh this before every chloride-duty enquiry.
Inconel 625 Angle
- Ni 58.0% minimum
- Cr 20.0 to 23.0%
- Mo 8.0 to 10.0%
- Nb + Ta 3.15 to 4.15%
SS 316L Angle
- Cr 16.0 to 18.0%
- Ni 10.0 to 14.0%
- Mo 2.00 to 3.00%
- No niobium addition
Seawater Pitting And Chloride Resistance Of ASTM B446 Inconel Alloy 625 Channel
What the alloy gives you in salt-laden service.
Pitting & Crevice
- Molybdenum lifts pitting resistance
- Suits seawater splash duty
Chloride Cracking
- Strong stress-corrosion resistance
- Chloride ions handled well
NACE MR0175
- Alloy 625 sits in ISO 15156-3
- Annealed condition is required
- State your hardness limit on enquiry
Strength Built In
- Niobium and molybdenum stiffen the matrix
- No strengthening heat treatment needed
Temperature Range
- Cryogenic to 982 °C service
- Grade 2 covers creep duty
Fabrication
- Welds by conventional methods
- Cut, bent and fitted on site
Get NACE MR0175 Compliance UNS N06625 Beam with Niobium-Molybdenum Strengthening for Flue Gas Desulfurization
Applications
Inconel 625 C Channel Applications
Chloride, acid and heat punish lesser alloys. This one holds.
Flue Gas Desulfurization
Offshore Oil & Gas
Marine & Seawater Systems
Chemical Processing
Power Generation
Aerospace Frames
Pollution Control Plants
Petrochemical Units
Monthly Delivery of Inconel 625 Angle in below countries:
| Export to | Continent | Shipping time |
|---|---|---|
 Spain |
Europe | 30 Days |
 Germany |
Europe | 20 Days |
 Malaysia |
Asia | 10 Days |
| Vietnam |
Asia | 10 Days |
Grade 1 vs Grade 2 Inconel 625 Selection
Pick The Condition Before You Pick The Size
Same chemistry. Heat treatment and duty differ.
Grade 1 Annealed
- Service normally up to 593 °C
- 120 ksi minimum tensile, up to 4 in
- 60 ksi minimum yield
- Annealed at 871 °C minimum
Grade 2 Solution Annealed
- Service above 593 °C for creep duty
- 100 ksi minimum tensile, all sizes
- 40 ksi minimum yield
- Solution annealed at 1093 °C minimum
Inconel 625 T Beam Testing And Inspection
Our Inconel 625 Angle manufacturer in India team checks every lot.
PMI Check
Confirms Ni, Cr and Mo on every piece
Tensile & Yield
Proof against the ordered grade
Hardness
Checked against your project limit
Leg & Thickness
Gauge check on legs and squareness
Visual Check
Surface, marking and burr review
Third-Party Review
Arranged on request
Inconel 625 Chains: Anchor, Lifting And Twist Link
Also Supplied From Our Mumbai Desk
Inconel 625 Chains suit wet, salty and chemical duty.
625 Inconel Alloy Anchor Chain
- Marine and offshore mooring use
- Made to your link size
625 Inconel Alloy Lifting Chain
- Corrosion-safe lifting near seawater
- Share length and working load
ASTM B446 Inconel 625 Twist Link Chain
- Twist link pattern to drawing
- Link stock grade: UNS N06625
625 Inconel W Beams Documents
Paperwork your QA team will ask for.
Mill Test Certificate
Lot-wise chemical and mechanical results
Every Lot
Test Report
Tensile and hardness values on request
On Request
Packing List & Invoice
Item-wise quantity and weight
With Dispatch
Inspection Report
Third-party witness for your project
On Request
Inconel 625 Angle Price In India
Nickel Moves Prices, So Rates Follow The Day
Ask an Inconel 625 Angle supplier in India for size-wise rates.
Send a size-wise list. Get per-metre pricing fast.
Inconel 625 Angle Frequently Asked Questions
Which ASTM standard covers Inconel 625 Angle Bar?
ASTM B446 covers UNS N06625 rod and bar in Grade 1 and Grade 2.
What is the Werkstoff number of an Inconel UNS N06625 Beam?
It is 2.4856. The number 2.4816 belongs to Alloy 600.
Which grade suits an ASTM B446 Inconel 625 U Channel?
Grade 1 serves up to 593 °C. Grade 2 suits creep duty above that.
Is an Inconel 625 C Channel NACE MR0175 compliant?
Alloy 625 is accepted in the annealed condition. State your hardness limit on the enquiry.
How does Inconel 625 differ from 316L for angles?
Alloy 625 has 58.0% minimum nickel and 8.0 to 10.0% molybdenum. 316L has 2.00 to 3.00% molybdenum.
Associate Traders and Importers available in Below Locations For Quick Deliveries
| Trading City | Trading City |
|---|---|
| Texas (USA) | California (USA) |
| Al Jubail (Saudi Arabia) | Dubai (UAE) |
| Dammam (Saudi Arabia) | Abu Dhabi (UAE) |
| Riyadh (Saudi Arabia) | Houston (USA) |
| Al Khobar (Saudi Arabia) | Indiana (USA) |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA