Mill-Certified Inconel Plate, Rolled Flat For Critical Fabrication Work
Spectro-Checked Nickel Alloy Heats
Every Inconel Plate heat is verified for exact Ni-Cr-Fe ratio.
Wide Thickness & Width Range
Sheet, plate & coil rolled to your exact fabrication drawing.
1000°C+ Service Reliability
Alloy 600, 601, 625 & 718 rated for high-heat, corrosive duty.
Heat-Wise Batch Traceability
Each rolled lot is linked back to its own mill test certificate.
Ready Stock, Fast Dispatch
Standard mill sizes packed and shipped without production delay.
Inconel Plate Summary
- 1Product Family: Sheet, Plate, Strip, Coil & Shim Stock
- 2Thickness Coverage: 0.5mm To 100mm, Custom On Request
- 3Governing Standard: ASTM B168 / ASME SB168
- 4Form: Hot Rolled, Cold Rolled & Cold Drawn
- 5Common Grades: Alloy 600, 601, 625, 718 & X-750
- 6Service Use: Aerospace, Heat Exchanger & Petrochemical Fabrication
Or call our Mumbai office: +91 22 6743 7134 • Inconel Plate batches dispatched with heat-wise MTC 3.1
Inconel Plate holds its strength well past red-heat service limits. Fabricators trust this alloy for weld-critical pressure vessel shells. Heat exchanger builders specify Inconel Sheet for tube-sheet and baffle plate work. Our rolling mill supplies tight-tolerance sheet, strip and coil stock. Aerospace contractors depend on Inconel Alloy Plate for combustion-zone components. Petrochemical fabricators choose this material for sour-service reactor internals. Every rolled sheet passes ultrasonic scanning before it leaves the mill. Mill test certificates travel with each coil for full batch traceability.
Mumbai · Nickel Alloy Sheet, Plate & Coil Exporter
Inconel Plate With Superior Corrosion Resistance & Heat Strength.
Ganpat Industrial rolls, slits and certifies Inconel Sheet, Strip, Plate, Shim & Coil for fabricators who cannot risk a rejected batch on aerospace, heat exchanger or petrochemical work across India, the GCC and Southeast Asia. Every Inconel Plate Suppliers claim we make is backed by heat-wise mill certification.
- ✓ISO 9001:2015
- ✓PED 2014/68/EU Compliant
- ✓ASTM B168 & ASME SB168 Certified
- ✓Mill Test Certificate 3.1
- ✓Third-Party Inspection Approved
Explore ASTM B168 Inconel Shim Sheets Supplier in India with Wide Range of Thickness & Finish Options
Inconel Plate Specification
ASME SB 168 Plate Material
- UNS N06600, N06625 & N07718
- W. Nr. 2.4816 / 2.4856
- Inconel 600 / 625 / 718
- ASTM B168 Grade Certified
Inconel Sheet Metal Size Range
- Thickness: 0.5mm – 100mm
- Width: Up To 1500mm
- Length: Up To 6000mm
- Custom Sizes On Drawing
Inconel Alloy Plate Testing
- PMI Testing
- Ultrasonic Testing (UT)
- Flattening & Bend Test
- Third-Party Inspection
Inconel Shim Sheet Finish
- 2B / No.1 Mill Finish
- Bright Annealed (BA)
- Polished Finish
- Cold Rolled Finish
Inconel Rolling Sheets Documentation
- Mill Test Certificate 3.1
- NABL Lab Report
- Packing List
- Certificate Of Origin
Inconel Sheet Metals Origin
- Indian Origin
- European Origin
- US Origin
- Heat-Number Traceable
Inconel Cold Rolled Plate Dimension
| Form | Thickness Range | Width Range | Length Range |
|---|---|---|---|
| Sheet / Shim | 0.5 – 3mm | 1000 – 1250mm | 2000 – 2500mm |
| Cold Rolled Strip | 0.5 – 6mm | Coil / Slit Width | Coil Form |
| Hot Rolled Plate | 6 – 50mm | 1250 – 1500mm | 3000 – 6000mm |
| Heavy Plate | 50 – 100mm | 1500mm | 3000 – 6000mm |
Weekly Delivery Of Inconel Plate In Below Countries
We remain a trusted Inconel Plate Supplier in India for aerospace, energy and process fabricators.
| Export To | Continent | Shipping Time |
|---|---|---|
Bahrain |
Asia | 9 Days |
Peru |
South America | 45 Days |
Morocco |
Africa | 45 Days |
Algeria |
Africa | 45 Days |
Inconel Hot Rolled Plates Weight Chart
Indicative weight per square metre for Alloy 600 sheet and plate at common thickness.
| Thickness | Weight / M² | Common Use |
|---|---|---|
| 1mm | 8.47 kg | Shim, Gasket Stock |
| 5mm | 42.35 kg | Baffle & Tube-Sheet |
| 10mm | 84.7 kg | Vessel Shell Plate |
| 25mm | 211.75 kg | Flange Blank, Heavy Plate |
Inconel Plate Weight Calculator
Step 1 – Measure
Note length, width & thickness in metres/mm
Step 2 – Multiply
Length (m) × Width (m) × Thickness (mm)
Step 3 – Apply Density
Multiply the result by 8.47 (Alloy 600 factor)
Step 4 – Get Weight (Kg)
Formula: L(m) × W(m) × T(mm) × 8.47
Example
2m × 1m × 5mm
Sample plate size for calculation
Formula Result
2 × 1 × 5 × 8.47
Length × Width × Thickness × Density Factor
Approx. Weight
84.7 Kg
Alloy 600 plate, indicative only
Need Exact Figure?
Ask Our Team
Share size & grade for a confirmed weight
Most Common Types Of Inconel Plates
Inconel Sheet
Flat Sheet
ASTM B 168 Inconel Shim Sheets
Shim
Inconel Polished Cold Drawn Plates
Polished
ASME SB168 Inconel Coils
Coil
Inconel Cold Rolled Plate
CR
Inconel Rolling Sheets
Rolled
Inconel Hot Rolled Plates
HR
Inconel Clad Plate
Clad
Monthly Delivery Of Inconel Plate In Below Countries
Every batch leaving our unit reflects our position as a leading Inconel Plate Supplier in India.
| Export To | Continent | Shipping Time |
|---|---|---|
Oman |
Asia | 5 Days |
UAE |
Asia | 5 Days |
Italy |
Europe | 30 Days |
USA |
North America | 40-60 Days |
Need A Third-Party Witnessed Test Certificate?We coordinate SGS, Bureau Veritas or TUV inspection on request.
Inconel 600 Vs 625 Plate Comparison
Inconel 600 Plate
- UNS N06600, good oxidation resistance
- Stable up to 1093°C service
- Preferred for furnace & heat-treatment parts
- Lower molybdenum content, moderate cost
Inconel 625 Plate
- UNS N06625, contains Mo & Nb for strength
- Superior resistance to pitting & crevice attack
- Preferred for marine & sour service equipment
- Higher cost due to added alloy content
Surface Finish Options For Inconel Sheet Metal
No.1 Hot Rolled Finish
Dull, scaled surface for heavy plate stock
2B Cold Rolled Finish
Smooth, reflective surface for sheet fabrication
Bright Annealed (BA)
High-shine finish for hygienic & visible parts
Shot Blasted Finish
Uniform matte texture ahead of inspection
Mirror Polished Finish
High-gloss surface for decorative & display duty
ASTM B168 Inconel Shim Sheets Chemical Composition
Reference chemistry for Inconel Plate stock as per ASTM B168 / ASME SB168.
| Grade | C | Mn | Cr | Fe | Si | S | Cu | Ni |
|---|---|---|---|---|---|---|---|---|
| Inconel 600 | 0.15 max | 1.00 max | 14.00 – 17.00 | 6.00 – 10.00 | 0.50 max | 0.015 max | 0.50 max | 72.00 min |
| Inconel 601 | 0.10 max | 1.0 max | 21.0 – 25.0 | Balance | 0.5 max | 0.015 max | 1.0 max | 58.0 – 63.0 |
| Inconel 625 | 0.10 max | 0.50 max | 20.0 – 23.0 | 5.0 max | 0.50 max | 0.015 max | – | 58.0 min |
| Inconel 718 | 0.08 max | 0.35 max | 17.00 – 21.00 | – | 0.35 max | 0.015 max | 0.30 max | 50.00 – 55.00 |
Need A Grade-Matched Chemistry Report?Share application media & temperature – we confirm the right alloy.
Inconel® Sheet Mechanical Properties
| Grade | Tensile Strength | Yield Strength (0.2% Offset) | Elongation |
|---|---|---|---|
| Inconel 600 | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
| Inconel 625 | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
| Inconel 601 | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
| Inconel 718 | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
Inconel Plate Equivalent Material Standards
ASTM / UNS
- ASTM B168 / ASME SB168 Plate Stock
- UNS N06600, N06625, N07718
- ASME SB166 Bar & Rod Cross-Reference
DIN / Werkstoff Nr.
- Inconel Werkstoff nr. 2.4816 (Alloy 600)
- Werkstoff 2.4856 (Alloy 625)
- DIN 17750 / EN 10095 Reference
JIS NCF Plate / Trade Name
- JIS NCF 600 / NCF 625 Sheet & Plate
- Inconel & Incoloy (Special Metals Trade Names)
- Often Searched As Alloy 600 / 625 Sheet
Inconel Polished Cold Drawn Plates Testing Methods
We remain a trusted Inconel Plate Supplier in India, so every roll passes strict quality checks.
Chemical Analysis – Spectro Test
Spectrometer reading confirms Ni-Cr-Fe content against grade chemistry
Every Heat
Tensile & Yield Test
Confirms tensile and yield strength meet ASTM B168 minimums
Every Batch
Flattening & Bend Test
Confirms ductility and weld-forming behaviour of rolled sheet
Every Batch
Ultrasonic Test (UT)
Detects internal lamination or defects across plate thickness
On Request
Positive Material Identification (PMI)
Handheld alloy analyzer confirms grade before packing
Every Batch
ASME SB168 Inconel Coils Test Certificates
Mill Test Certificate As Per EN 10204
Each Inconel Plate consignment ships with a heat-traceable 3.1 certificate covering chemistry, mechanical results and applicable standard.
Nickel Sheet Metal Physical & Thermal Properties
Density
8.4-8.5 g/cm³
Alloy 600 / 625 reference density
Melting Range
1350-1413°C
Solidus to liquidus range
Thermal Conductivity
14.9 W/m·K
Low compared to carbon steel plate
Corrosion Resistance
Excellent
Strong in acidic, saline & high-heat media
Comparing Grades For A High-Heat Project?Send your process temperature & media – we recommend the right alloy.
Heat Treatment Process For Inconel Clad Plate
Solution Annealing
Furnace cycle restores grain structure after rolling
Water Quenching
Rapid cool locks in corrosion-resistant microstructure
Age Hardening (718 Only)
Precipitation cycle builds high-strength properties
Stress Relieving
Reduces residual stress from cold working
Manufacturing Process Of Inconel Plate
Raw Billet & Heat Selection
Certified nickel alloy billet chosen against grade chemistry
Hot Rolling
Slab reduced to plate thickness under controlled temperature
Cold Rolling & Slitting
Sheet, strip and coil rolled to close tolerance
Annealing & Pickling
Restores ductility and removes surface scale
Inspection, Marking & Packing
PMI, dimensional check and heat-number stamping before dispatch
Inconel Material HSN Code & GST Rate In India
HSN Code
7506
Nickel plate, sheet, strip & foil heading
GST Rate
18%
Standard rate on nickel alloy sheet/plate
Export Scheme
LUT / IGST Refund
Zero-rated export under GST law
Origin Marking
Made In India
Stamped on every export consignment
Buy Inconel Cold Rolled & Hot Rolled Sheets in 600/601 Grades as per ASME SB168 Standards for Aerospace, Heat Exchanger &
Application Industries Of Inconel Plate
Choose an Inconel Plate manufacturer in India, like us for standard and custom rolled stock.
Oil, Gas & Refinery Vessel Shells
Aerospace & Gas Turbine Components
Chemical & Petrochemical Reactor Internals
Marine & Offshore Structural Plate
Power Generation & Boiler Baffle Plate
Nuclear Reactor Component Fabrication
Heat Exchanger & Tube-Sheet Fabrication
Pollution Control & Flue-Gas Equipment
Documentation For Inconel Rolling Sheets
Mill Test Certificate 3.1
Chemistry & mechanical results per heat number
Standard
Packing List & Commercial Invoice
Piece count, weight & dimension per bundle
Standard
Certificate Of Origin
Chamber-attested origin document for customs clearance
On Request
NABL / Third-Party Lab Report
Independent lab verification of chemistry & mechanicals
On Request
Packing & Export For Inconel Plate
We are a recognized Inconel Plate Supplier in India, so shipments arrive fully documented and secure.
Wooden Crate / Bundle Packing
Grade & Heat Number Tagging
Interleaved Paper & Edge Protection
FCL / LCL Sea & Air Freight
Frequently Asked Questions
What is the price of Inconel Plate?
Price depends on grade, thickness, width and quantity; share drawing for exact quote.
What size range is available in Inconel Shim Shete Size?
We supply from 0.5mm shim thickness up to 100mm heavy plate stock.
Which HSN code applies to Inconel Sheet in India?
Inconel sheet and plate fall under HSN code 7506, taxed at 18% GST.
Is there a minimum order quantity for Inconel Shim Sheet?
No fixed MOQ; we supply single sheets and full project quantities on request.
What is the difference between Inconel 600 and 625 Plate?
Inconel 600 resists higher heat; 625 offers better pitting and crevice resistance.
Our Dealers and Distributors Are Present in the Locations Mentioned Below
| Texas (USA) | California (USA) |
| Al Jubail (Saudi Arabia) | Dubai (UAE) |
| Dammam (Saudi Arabia) | Abu Dhabi (UAE) |
| Riyadh (Saudi Arabia) | Houston (USA) |
| Al Khobar (Saudi Arabia) | Indiana (USA) |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA