Why Buyers Trust Ganpat Industrial For Monel K500 Angle, Channel, Beam & Chain?
Genuine UNS N05500 Chemistry
Every heat of Monel K500 Angle Bar is lab-checked before it is rolled or forged.
Age-Hardened On Every Lot
Precipitation-hardened sections are batch-tested to the ASTM B865 property range.
Ready Stock, Fast Dispatch
Angle, C Channel, U Channel, I/H/T/W Beam & Chain moving from Mumbai within days.
Custom Cut & Drawing Match
3, 4, 5, 6 MTR standard lengths, or cut and drilled to your fabrication drawing.
Full Traceable Documentation
Heat-wise MTC 3.1, PMI reports & NACE MR0175 compliance on request.
Monel K500 Angle, Channel, Beam & Chain Overview
- 1Section Range: Angle, C Channel, U Channel, H/I/T/W Beam & Anchor Chain
- 2Alloy Reference: Monel K500 Angle Bar / UNS N05500 / WERKSTOFF NR.2.4375
- 3Governing Standard: ASTM B865, QQ-N-286, AMS 4676, BS 3075/3076 NA18
- 4Thickness Coverage: 3.0mm to 120mm across all sections
- 5Standard Lengths: 3 MTR, 4 MTR, 5 MTR, 6 MTR or custom cut
- 6Core Service Use: Offshore, Marine, Chemical & Sour-Gas Structural Duty
Or call our Mumbai office: +91 22 6743 7134 • Monel K500 Angle Supplier in India with drawing-matched export packing
Ganpat Industrial rolls, forges and age-hardens Monel K500 Angle Bar for fabricators. These sections complement ASTM B865 Monel Alloy K500 Channel and N05500 Beam. Monel K500 Chains help fabricators achieve three-times standard Monel 400 yield strength. As an active Monel K500 Angle Supplier in India, we provide sections. Every precipitation-hardened section leaves our shop Brinell-checked, PMI-verified and heat-traceable. Buyers seeking dependable Monel K500 Angle Manufacturer in India rely confidently. Our stock includes K500 Monel Alloy Anchor Chain for offshore fabrication. WERKSTOFF NR.2.4375 I Beam and Hot Rolled Steel K500 Equal Leg Angle support marine schedules. These products help offshore, marine and chemical-process fabrication schedules remain reliably on track.
Mumbai · Monel K500 Angle, Channel, Beam & Chain Exporter
Monel K500 Angle
Ganpat Industrial supplies Monel K500 Angle Bar, ASTM B865 Monel® Alloy K500 Channel, Monel UNS N05500 Beam and Monel K500 Chains to fabricators who need three-times the yield strength of Monel 400 for offshore platforms, sour-gas structurals and marine hardware across India, the GCC and Southeast Asia.
- ✓ISO 9001:2015
- ✓NACE MR0175 / ISO 15156
- ✓NORSOK Certified Material
- ✓Mill Test Certificate 3.1
- ✓Third-Party Inspection Approved
Trusted Supplier of Monel Alloy K500 Beam, Channel & Chain in India
Specification Of Monel K500 Angle, Channel, Beam & Chain
Monel K500 Angle Bar Size Range
- Equal & Unequal Leg Angle
- Thickness: 3.0mm – 12mm
- Leg Size: 20mm – 200mm
- Length: 3 / 4 / 5 / 6 MTR
ASTM B865 K500 Monel Channel Size
- C Channel & U Channel Form
- Size: 40x20mm – 300x300mm
- Web Thickness: 4mm – 15mm
- Custom Drawing Accepted
Monel UNS N05500 Beam Depth
- H, I, T & W Beam Profiles
- Depth: 3″ through 12.31″
- Flange Thickness: 5mm – 40mm
- ASTM B865 Certified
Monel K500 Chains Diameter
- Monel Alloy K500 Anchor Chain
- Diameter: 1/8″ – 1/2″
- NACM & Custom Link Pattern
- Proof Coil & Short Link Options
Monel K500 T Beam Governing Standards
- ASTM B865 / QQ-N-286
- AMS 4676
- BS 3075 NA18 / BS 3076 NA18
- ISO 9723 / 9724 / 9725
K500 Monel Alloy W Beam Finish
- Mill / Pickled Finish
- Bright Machined Surface
- Sand Blasted On Request
- Age-Hardened Structure
Is Monel K500 C Channel Magnetic? Buyers Ask This First
Non-Magnetic Base State
Bulk Monel K500 stays non-magnetic down to -129°C in the mill-annealed condition
Cold Work Can Add Surface Pull
Machining or drawing may leave a thin magnetic skin on the surface layer
Removable By Acid Pickling
Bright dipping or pickling restores the fully non-magnetic finish for instrument use
Need An Accurate Rate For Your Monel K500 Angle Enquiry?Send size, thickness & quantity – our team responds with pricing within 24 hours.
Leading ASTM B865 Monel K500 U Channel Manufacturer in India. Buy Custom Size Monel K500 C Channel as per ASME B865.
ASTM B865 Monel K500 U Channel Size Chart
Contact Monel K500 Angle Supplier in India, who provides custom sizes and thickness
| Section | Size Range | Thickness | Standard Length |
|---|---|---|---|
| Monel K500 Equal Leg Angle | 20 x 20mm – 200 x 200mm | 3.0mm – 12mm | 3 / 4 / 5 / 6 MTR |
| ASTM B865 Monel K500 U Channel | 40 x 20mm – 300 x 300mm | 4mm – 15mm | 3 / 4 / 5 / 6 MTR |
| Monel UNS N05500 I / H / T Beam | 3″ – 12.31″ Depth | 5mm – 40mm | 3 / 4 / 5 / 6 MTR |
| K500 Monel Alloy Anchor Chain | 1/8″ – 1/2″ Diameter | – | Coil / Drum Wound |
Monel K500 Angle Weight Chart Per Meter
Indicative Monel K500 Equal Leg Angle weight, calculated at 8.44 g/cm³ density – confirm exact drawing weight with our team before ordering.
25 x 25 x 3mm
1.19 Kg/Mtr
Light structural & bracket use
40 x 40 x 5mm
3.17 Kg/Mtr
General fabrication frames
50 x 50 x 6mm
4.76 Kg/Mtr
Marine & deck structural
65 x 65 x 8mm
8.24 Kg/Mtr
Heavy offshore support
Testing Methods For Monel K500 Beam & Channel
Every batch of ASTM B865 Monel® Alloy K500 Channel and Beam clears these checks before dispatch.
PMI / Spectro Testing
Confirms Ni-Cu-Al-Ti chemistry on every heat before rolling
Hardness & Tensile Test
Verifies age-hardened strength meets the ASTM B865 property band
Dimensional Inspection
Leg, web, flange & length checked against drawing tolerance
Micro & Macro Test
Grain structure review confirms proper solution & age treatment
Intergranular Corrosion Test
Screens welded and heat-affected zones on channel & chain links
100% Radiography (On Request)
Weld-line and casting-linked chain fittings screened for internal defects
Types Of Monel K500 Angle, Channel & Beam Sections
As an active Monel K500 Beam Manufacturer in India, we stock every profile used across offshore and marine structural programmes.
Hot Rolled Steel K500 Equal Leg Angle
ASTM B865
Monel K500 C Channel
ASTM B865
K500 Monel W Beams
ASTM B865
Monel K500 T Beam
ASTM B865
WERKSTOFF NR.2.4375 I Beam
WNr 2.4375
ASTM B865 Monel K500 U Channel
ASTM B865
Monel Equal Leg Angle
UNS N05500
Monel UNS N05500 Beam
UNS N05500
Need A Custom Monel K500 Angle Or Channel Drawing Matched?Share your size, thickness & length list – get a factory-price quote within 24 hours.
K500 Monel Alloy Anchor Chain Breaking Load Guide
Approximate proof and breaking load for Monel K500 Industrial Chain by link diameter – confirm the exact grade certificate before mooring or lifting use.
1/8″ Diameter
≈ 1.1 Ton
Light Duty
1/4″ Diameter
≈ 2.6 Ton
General Rigging
3/8″ Diameter
≈ 5.4 Ton
Marine Mooring
1/2″ Diameter
≈ 8.9 Ton
Anchor Duty
Monel K500 Angle HSN Code & GST Rate In India
HSN Code – Angle & Channel
7508.90
Other articles of nickel, not elsewhere specified
HSN Code – Beam Sections
7508.90
Nickel alloy structural profile classification
GST Slab
18%
Applicable on domestic supply within India
Export Incentive
RoDTEP Eligible
Duty remission on qualifying export shipments
Monel K500 Vs Monel 400 Angle – Which Alloy To Choose?
Monel K500
- Age-hardened with Al & Ti additions
- Up to 3x the yield strength of Monel 400
- Chosen for shafts, chain & loaded structurals
- Non-magnetic in solution-annealed state
Monel 400
- Solution-annealed, non-age-hardenable
- Lower strength, higher formability
- Preferred for tanks, piping & sheet work
- Consistently non-magnetic in all forms
Weekly Delivery Of Monel K500 Angle In These Countries
| Export to | Continent | Port | Shipping time |
|---|---|---|---|
|
Singapore |
Asia | Port Klang | 7-14 Days |
|
Germany |
Europe | Port of Rotterdam | 12 Days |
|
Malaysia |
Asia | Port of Singapore | 15-50 Days |
Monel K500 Beam Vs Stainless Steel Beam – Cost Logic
Monel K500 Beam
- Higher raw material & nickel-copper cost
- Chosen where 316L faces SCC in seawater
- Selected for critical, high-load joints only
- Lower long-term maintenance in sour service
Stainless Steel Beam
- Lower upfront material cost
- Adequate for general atmospheric structural duty
- Risk of stress-corrosion cracking in chlorides
- Preferred for bulk, non-critical structural runs
Confirming Load Or Corrosion Duty For Your Structural Job?Send your service condition – we recommend the correct Monel K500 section.
Chemical Composition Of Monel UNS N05500 Angle
NickelNi
63.0% Min
CopperCu
27.0-33.0%
AluminiumAl
2.30-3.15%
TitaniumTi
0.35-0.85%
IronFe
0.5-2.0%
ManganeseMn
≤ 1.50%
CarbonC
≤ 0.25%
SiliconSi
≤ 0.50%
SulphurS
≤ 0.010%
Mechanical Properties Of ASTM B865 Monel K500 Beam
Tensile Strength
1100 MPa
160,000 Psi
Yield Strength (0.2%)
790 MPa
115,000 Psi
Elongation (2″)
≥ 20%
Ductility
Hardness (Typical)
250-350 HB
Age-Hardened
Need A Certified Hardness & Tensile Report?Send section size, quantity & standard for a free document review.
Monel K500 Angle Equivalent Material & Standards
ASTM / UNS
- ASTM B865 Monel K500
- UNS N05500
- QQ-N-286
- AMS 4676
DIN / WNr
- WERKSTOFF NR.2.4375
- NiCu30Al Base Chemistry
- DIN 17752 / 17753 / 17754
BS / ISO
- BS 3075 NA18 / BS 3076 NA18
- ISO 9723 / 9724 / 9725
- ISO 15156-3 (NACE MR0175)
Monthly Delivery Of Monel K500 Angle In These Countries
| Export to | Continent | Port | Shipping time |
|---|---|---|---|
|
USA |
North America | Port of Los Angeles | 33-47 Days |
|
Brazil |
South America | Port of Itaqui | 25-39 Days |
|
UAE |
Asia | Port of Shanghai | 20-25 Days |
Physical Properties Of Monel K500 Angle & Channel
Density
8.44 g/cm³
At room temperature, solid section
Melting Point
1350°C
2460°F approximate solidus range
Modulus Of Elasticity
~179 GPa
Tension, room temperature
Max Service Temp
1000°F
Per ASME structural limit
Monel Alloy K500 Beam Surface Coating & Finish Options
Mill / As-Rolled Finish
Standard economical surface for structural angle & channel use
Acid Pickled & Passivated
Removes any surface magnetism and restores corrosion film
Bright Machined Finish
Tight-tolerance surface for beam flanges & fitted joints
Sand / Bead Blasted
Uniform matte texture for coating adhesion on offshore parts
VCI Oil & Wrap
Corrosion-inhibiting oil film applied for chain during storage transit
Test Certification Offered With Monel K500 Chain
Mill Test Certificate EN 10204 3.1
Chemistry, hardness & tensile results traced to heat number
Every Order
EN 10204 3.2 Certificate
Third-party witnessed certification for critical offshore orders
On Request
NACE MR0175 / MR0103 Report
Sour-service compliance for anchor chain & structural sections
On Request
100% Radiography Test Report
For welded chain links & fabricated channel joints
Export Orders
Certificate Of Origin & Packing List
PO-matched, HSN, GST & net/gross weight breakup included
Every Order
Need A Finish Recommendation For Your Application?Tell us the exposure & we will suggest the right surface treatment.
Application Of Monel K500 Angle, Beam & Chain
Fabricators buying Monel K500 Angle Bar and K500 Monel Alloy Anchor Chain already ship into these sectors every month.
Off-Shore Oil Drilling Platforms
Marine & Shipbuilding Structurals
Petrochemicals & Refineries
Pump Shaft & Valve Support Frames
Gas Processing Structural Support
Specialty Chemical Equipment
Sea Water Handling Equipment
Mooring, Lifting & Anchor Chain Duty
Frequently Asked Questions
What is the price of Monel K500 Angle per kilogram?
Rates track daily nickel-copper LME movement, so send your size, thickness and quantity for a current factory-direct quote rather than a fixed listed price.
What is the material equivalent of Monel K500 Angle?
Monel K500 corresponds to UNS N05500, WERKSTOFF NR.2.4375, ASTM B865, QQ-N-286 and BS 3075/3076 NA18 across the major international standards.
Can Monel K500 Channel be welded on site?
Yes, but post-weld age hardening or careful heat control is recommended to restore full strength in the heat-affected zone.
What is the minimum order quantity for Monel K500 Chain?
We accept both drum-length coil orders and smaller cut-to-length lots for anchor, lifting and industrial chain requirements.
We Collaborate With Traders In The Following Cities
| Regions | Country |
|---|---|
| South Carolina | USA |
| North America | USA, Canada, Mexico |
| South America | Brazil, Argentina, Colombia |
| North Africa | Egypt, Morocco, Algeria |
| West Africa | Nigeria, Ghana, Senegal |
| East Africa | Kenya, Ethiopia, Tanzania |
| Middle East | Saudi Arabia, Iran, Iraq |
| South Asia | India, Pakistan, Bangladesh |
| East Asia | China, Japan, South Korea |
| Melanesia | Fiji, Papua New Guinea |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA