Why Fabricators Choose Ganpat Industrial For Monel K500 Forged Fittings?
Age-Hardenable Nickel-Copper Alloy
Precipitation hardened for nearly 3× the yield strength of Monel 400
NB ½″ To 4″ In Stock
Threaded & socket weld ends ready in Class 2000, 3000 & 6000
Mill TC For Every Heat
EN 10204 3.1 / 3.2 with spectro chemistry & PMI on request
Sub-Zero & Sour Service Rated
Retains ductility to cryogenic temperature, NACE MR0175 compliant
Export Packed, Ready To Ship
Wooden case, fumigated & poly-wrapped dispatch worldwide
Monel K500 Forged Fittings Product Abstract
- 1Shapes: Elbow, Tee, Cross, Union, Coupling, Plug, Bushing, Cap
- 2Size Range: NB ½″ to 4″ • Threaded & Socket Weld Ends
- 3Standard: ASME B16.11 • MSS SP-79 / 83 / 95 / 97 • BS 3799
- 4Pressure Class: 2000 LBS • 3000 LBS • 6000 LBS
- 5Material Spec: ASTM / ASME B564, UNS N05500, WNR 2.4375
- 6Origin: Mumbai forged • solution annealed & age hardened
Or call our Mumbai office: +91 22 6743 7134 • Same-week dispatch on standard sizes
Ganpat Industrial Corporation forges Monel K500 Threaded Fittings for engineers who cannot afford a weak joint in seawater, sour gas or cryogenic service. This nickel-copper alloy is strengthened through controlled additions of aluminium and titanium, then solution annealed and age hardened to deliver strength most stainless and copper-nickel fittings simply cannot match. Every Alloy K500 Threaded Elbow, Tee, Union, Cross, Coupling and Plug leaving our Mumbai works is produced to ASTM B564 / ASME SB564 in size NB ½″ to 4″, with threaded or socket weld ends built to ASME B16.11. Buyers across the Middle East, Africa and South-East Asia rely on our Nickel Alloy K500 fittings for pump shafts, valve trim, offshore drill strings and hydrofluoric-acid alkylation units where corrosion resistance and mechanical strength must work together.
Mumbai · Nickel-Copper Alloy Threaded Fittings Manufacturer & Exporter
Monel K500 Forged Fittings Engineered To Withstand High-Stress, Sour Gas And Marine Environments
Ganpat Industrial forges Monel K500 Threaded Elbow, Tee, Union, Cross, Coupling, Plug, Bushing and Cap in NB ½″ to 4″ – age hardened for pump shafts, valve trim, drill collars and marine hardware across India, the GCC and Africa.
- ✓ISO 9001:2015
- ✓ISO 14001:2015
- ✓OHSAS 18001:2007
- ✓PED Certified
- ✓NACE MR0175 Compliant
Hot and Cold Forged Alloy K500 Threaded Elbow Manufacturer in India in Custom Sizes
Monel K500 Forged Fittings Specification
Alloy K500 Fitting Size Range
- NB: ⅛″ – 4″
- Threaded & Socket Weld ends
- DN 6 – DN 100
- Custom bore on drawing
Governing Design Standard
- ASME B16.11 Forged Fittings
- MSS SP-79 / 83 / 95 / 97
- BS 3799 Screwed Fittings
- ASTM / ASME B564
Fitting Shapes Available
- Elbow 45° / 90°
- Equal & Branch Tee
- Cross, Union & Coupling
- Plug, Bushing & Cap
Production Route
- Hot & Cold Forging
- Solution Annealing
- Precipitation Age Hardening
- Stress Relieving
Material Grade
- Monel K500 / UNS N05500
- WNR / DIN 2.4375
- QQ-N-286 Reference
- Custom Chemistry On Request
End Connection Options
- NPT Threaded (ASME B1.20.1)
- BSPT / BSPP Threaded
- Socket Weld Bore
- Male-Female Combination
Need A Custom Monel K500 Threaded Size Or Class?Share your drawing or bill of material – get a factory-price quote within 24 hours.
Monel K500 Threaded Fittings Dimension Chart
| NB (Inches) | DN (mm) | 90° Elbow – A | 45° Elbow – A | Min. Thread Depth |
|---|---|---|---|---|
| 1/8 | 6 | 11.0 | 8.0 | 9.5 |
| 1/4 | 8 | 11.0 | 8.0 | 9.5 |
| 3/8 | 10 | 13.5 | 8.0 | 9.5 |
| 1/2 | 15 | 15.5 | 11.0 | 9.5 |
| 3/4 | 20 | 19.0 | 13.0 | 12.5 |
| 1 | 25 | 22.5 | 14.0 | 12.5 |
| 1-1/4 | 32 | 27.0 | 17.5 | 12.5 |
| 1-1/2 | 40 | 32.0 | 20.5 | 12.5 |
| 2 | 50 | 38.0 | 25.5 | 16.0 |
| 2-1/2 | 65 | 41.0 | 28.5 | 16.0 |
| 3 | 80 | 57.0 | 32.0 | 16.0 |
| 4 | 100 | 66.5 | 41.0 | 19.0 |
Types Of Monel K500 Forged Fittings
Being a leading Monel K500 Forged Fittings Supplier in India, we forge every shape below in-house, from a single piece to a full container load.
Monel K500 Threaded Elbow
ASME B16.11
Monel K500 Threaded Tee
MSS SP-83
Monel K500 Threaded Coupling
ASME B16.11
Monel K500 Threaded Union
MSS SP-83
Monel K500 Threaded Cross
ASME B16.11
Monel K500 Threaded Plug
MSS SP-95
Monel K500 Threaded Bushing
MSS SP-97
Monel K500 Threaded Cap
ASME B16.11
Keep Wide Range Of ASTM B564 UNS N05500 Socket Weld Tee and Reducer With Normalizing and Annealed Service
Nickel K50 Forged Tee Weight Chart
| NB (Inches) | DN (mm) | 90° Elbow (kg) | 45° Elbow (kg) |
|---|---|---|---|
| 1/8 | 6 | 0.113 | 0.100 |
| 1/4 | 8 | 0.095 | 0.086 |
| 3/8 | 10 | 0.118 | 0.100 |
| 1/2 | 15 | 0.204 | 0.191 |
| 3/4 | 20 | 0.340 | 0.318 |
| 1 | 25 | 0.476 | 0.431 |
| 1-1/4 | 32 | 0.689 | 0.630 |
| 1-1/2 | 40 | 0.943 | 0.762 |
| 2 | 50 | 1.529 | 1.343 |
| 2-1/2 | 65 | 3.025 | 3.520 |
| 3 | 80 | 5.026 | 3.878 |
| 4 | 100 | 10.247 | 10.913 |
Pressure Rating Of Monel Alloy K500 Screwed Fittings
| Fitting Class | Rated Pressure (psi) | Rated Pressure (Bar) | Matching Pipe Schedule |
|---|---|---|---|
| Class 2000 | 2000 psi | 138 Bar | SCH 80 / XS |
| Class 3000 | 3000 psi | 207 Bar | SCH 160 |
| Class 6000 | 6000 psi | 414 Bar | XXS |
Monel K500 vs Monel 400 Threaded Fittings
Monel 400 Threaded Fittings
- Solid-solution alloy, not age hardenable
- Tensile strength around 550 MPa
- Softer, easier to machine & bend
- Best for general seawater piping
Monel K500 Threaded Fittings
- Precipitation hardened with Al & Ti
- Tensile strength up to 1100 MPa
- Nearly 3× the yield strength of Alloy 400
- Chosen for pump shafts, valve trim & drill collars
Monel K500 Forged Fittings Delivered Weekly to the Following Countries
| Export To | Continent | Shipping Time | Port |
|---|---|---|---|
|
Indonesia |
Asia | 9 Days | Belawan |
|
Nigeria |
Africa | 30 Days | Calabar |
|
Colombia |
South America | 45 Days | Barranquilla |
Comparing Monel K500 To Another Nickel Alloy?Tell us the service condition – we recommend the right grade and cost.
HSN Code Of Nickel Alloy K500 Fittings
HSN Code
7507 12 00
Nickel alloy tube & pipe fittings
GST Rate (India)
18%
On domestic invoice value
Chapter Heading
Chapter 75
Nickel & articles thereof
Export Scheme
MEIS / RoDTEP
Duty benefit as applicable
Application Industries Of WNR 2.4375 Socket weld Fittings
Offshore Oil Drilling
Power Generation
Petrochemical Plants
Gas Processing
Specialty Chemicals
Pharmaceutical Equipment
Sea Water Equipment
Heat Exchangers & Condensers
Manufacturing Process Of Alloy K500 Threaded Elbow
Billet Selection
Spectro-tested Ni-Cu-Al-Ti billet cut to forging length
Hot / Cold Forging
Closed-die forging into elbow, tee, union & other shapes
Solution Annealing
Heated & quenched to dissolve Al-Ti precipitates evenly
Age Hardening
Controlled reheat precipitates Ni3(Al,Ti) for peak strength
Threading & Finishing
NPT/BSPT threading, deburring & final dimension check
Testings Of Monel K500 Fittings
Chemical & PMI Analysis
Spectro analysis plus positive material identification per heat
Mechanical Testing
Tensile, hardness, flattening & flaring tests per lot
Micro & Macro Test
Grain structure and precipitate distribution examination
Pitting Resistance Test
Confirms performance in chloride and sour-water service
Intergranular Corrosion Test
Screens grain-boundary attack after heat treatment
Third-Party Inspection
EN 10204 3.1 / 3.2 with agency witness on request
Need NACE MR0175 Certified Monel K500 Fittings?Send your service data sheet – we match documentation to your project spec.
Equivalent Grades Of Monel K500 Threaded Pipe Fittings
Reliable Monel K500 Forged Fittings Supplier in India following ASTM dimensional standards
USA – ASTM / UNS
- UNS N05500
- ASTM / ASME B865 & B564
- Trade name: Monel K-500
Germany – DIN / EN
- Werkstoff Nr. 2.4375
- DIN 17752 / EN 10204
- NiCu30Al3MnTi
UK – BS
- BS 3076 NA18
- BS 3072 NA18
- Also referenced under QQ-N-286 (aerospace)
Chemical Composition Of ASTM B564 UNS N05500 Forged Tee
Aluminium and Titanium are the precipitation-hardening additions that separate Alloy K500 from standard Monel 400.
Carbon (C)
0.25% Max
Manganese (Mn)
1.50% Max
Silicon (Si)
0.50% Max
Sulphur (S)
0.010% Max
Mechanical Properties Of WNR 2.4375 Forged Reducer
Tensile Strength
1100 MPa
160,000 psi · Age Hardened
Yield Strength (0.2%)
790 MPa
115,000 psi · 3× Monel 400
Elongation
20% Min
In 2 Inch Gauge Length
Density & Melting Point
8.44 g/cm³
1350°C / 2460°F
Monthly Delivery of Monel K500 Forged Fittings to Below Countries
Well-known Monel K500 Forged Fittings Fittings Manufacturer in India exporting to 40+ countries
| Export To | Continent | Shipping Time | Port |
|---|---|---|---|
|
Philippines |
Asia | 14 Days | Zamboanga |
|
Argentina |
South America | 45 Days | La Plata |
Documentation Of Monel Alloy K500 Forged Union
Mill Test Certificate
EN 10204 3.1 / 3.2 with full chemical & mechanical report
Standard
NACE MR0175 / MR0103
Sour-service compliance letter on request
On Request
Certificate Of Origin
Chamber of Commerce attested, Form A for GSP
Export Set
Heat Treatment Chart
Annealing & age-hardening cycle traceable to each heat
Standard
Fumigation Certificate
Wooden pallet / case packing per ISPM-15
Export Set
Packaging Of Monel K500 Screwed Fittings
Poly Bag & Bubble Wrap
Threaded ends capped to protect from dust and moisture
Corrugated Carton / Wooden Box
Fumigated wooden cases for palletised export loads
Marked & Labelled
Heat number, size, class & PO reference on every pack
Ready To Order Monel K500 Threaded Fittings?Get a firm FOB Mumbai price against your size, class and quantity today.
FAQ – Monel K500 Threaded Fittings Price, MOQ & Lead Time
What is the price of Monel K500 Threaded Fittings?
Price is driven by nickel-alloy LME rates, size and class; share your BOQ for a firm FOB Mumbai quote.
What is the minimum order quantity?
Ganpat Industrial supplies from single-piece trial orders to full container loads.
What is the typical lead time?
Standard NB & class combinations ship within 1-2 weeks; custom sizes 3-5 weeks.
Can Monel K500 fittings be supplied with NACE certification?
Yes, NACE MR0175 / MR0103 compliant documentation is available on request.
Is a hydrostatic test mandatory on threaded fittings?
ASME B16.11 does not mandate hydrotest; it is offered as an add-on inspection.
Discover Our Ready Inventory in These Cities
| Texas (USA) | California (USA) |
| Al Jubail (Saudi Arabia) | Dubai (UAE) |
|---|---|
| Dammam (Saudi Arabia) | Abu Dhabi (UAE) |
| Riyadh (Saudi Arabia) | Houston (USA) |
| Al Khobar (Saudi Arabia) | Indiana (USA) |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA