Nickel 201 Pipe Fittings

Nickel 201, Alloy 201, WNR 2.4068, ASTM B366 UNS N02201, Nickel Alloy 201, LC Nickel 99.2, Ni 201, and Pure Nickel 201 are some of the names under which buyers hunt for this grade. Regardless of the name you choose, the material and mill certification are the same: a low-carbon, corrosion-resistant nickel fitting designed for the most demanding high-heat and caustic applications.

 

Alloy 201 Elbow Manufacturer in India With Bending Radius 1D, 2D, 3D, 5D

Nickel 201 Pipe Fittings Specification

Nickel 201 Pipe Fittings Supplier in India maintains WNR 2.4068 specification records precisely

Nickel 201 Pipe Fitting Size Range

• Seamless: ½″ – 24″
• Butt–weld: ½″ – 36″
• Fabricated: above 36″ on request

Alloy 201 Tee Governing Standards

• ASTM / ASME B366
• Dimensions: ASME B16.9 & B16.28
• Threaded/Socket: MSS SP–43

WNR 2.4068 Reducer Designation

• UNS N02201
• WNR 2.4068 (2.4061)
• DIN LC–Nickel 99.2

Nickel Alloy 201 Stub End Process Route

• Seamless (hot & cold formed)
• Welded (ERW/EFW)
• Forged (socket & threaded)

Nickel 201 Cross Schedule Availability

• SCH 5S / 10S / 10
• SCH 40, 80, 160
• XXS on request

Nickel 201 Elbow End Finish

• Bevelled ends for BW
• Threaded (NPT/BSP)
• Socket–weld bore

Pure Nickel 201 Pipe Bend Surface Condition

• Pickled & annealed
• Mill finish
• Bright polished on request

Ni 201 Lap Joint Stub Ends Approvals Held

• Third–party TPI (SGS/BV/TUV)
• PED / CE on request
• Approved for EPC projects

ASTM B366 UNS N02201 Pipe Cap Certification

• EN 10204 3.1
• 3.2 on customer request
• Free samples available

Alloy 201 Elbow Bending Radius

Bending Radius

1D

Tight Radius

Bending Radius

2D

Custom Available

Bending Radius

3D

Standard

Bending Radius

5D

Standard

Bending Radius

6D

Custom Available

Bending Radius

8D

Custom Available

Bending Radius

10D

Long Radius

 

Offer European Origin ASTM B366 UNS N02201 Tee and Reducer With HIC and Ultrasonic Testing

Testing Requirements For WNR 2.4068 Reducer

Visual Inspection

Surface, dimension & end–prep check

Ultrasonic Testing

Internal flaw & wall–thickness scan

Radiographic Testing

100% RT on weld seams

Magnetic Particle Testing

Surface & near–surface crack check

Hydrostatic Testing

Water pressure integrity test

Leak Testing

Gas / bubble–tight verification

Nickel 201 Elbow Dimensions

Nickel 201 Pipe Fittings Supplier in India with precise ASME B16.9 dimensions

Outsidde Daimeter (D)	Nominal Sizes	90 Deg (Long Radius) Center-End Of (A)	45 Deg (Long Radius) Center-End Of (B)
21.3	1/2	38	16
26.7	3/4	38	19
33.4	1	38	22
60.3	2	76	35
88.9	3	114	51
114.3	4	152	64
168.3	6	229	95
219.1	8	305	127
273	10	381	159
323.8	12	457	190
406.4	16	610	254
457	18	686	286
508	20	762	318
610	24	914	381
660	26	991	406
711	28	1067	438

Full intermediate sizes (1¼″, 2½″, 5″, 14″, 18″, 22″) supplied ex–stock – ask our team for the complete size list.

ASTM B366 UNS N02201 Pipe Cap Pressure Rating

Class 150

19.6 Bar

284 PSI @ 38°C

Class 300

51.1 Bar

741 PSI @ 38°C

Class 600

102.1 Bar

1480 PSI @ 38°C

Class 900

153.2 Bar

2220 PSI @ 38°C

Class 1500

255.3 Bar

3705 PSI @ 38°C

Class 2500

425.5 Bar

6170 PSI @ 38°C

Max Service Temp

600°F

315°C sustained service

Design Code

B31.3

Process piping

Types of Nickel 201 Pipe Fittings

Nickel 201 Elbow

90° / 45° / 180°

Alloy 201 Tee

Equal / Reducing

WNR 2.4068 Reducer

Con. / Ecc.

ASTM B366 UNS N02201 Pipe Cap

BW End Cap

Nickel Alloy 201 Stub End

Type A / B

LC Nickel 99.2 Collar

Reinforcing

Nickel 201 Cross

4–Way

Ni 201 Lap Joint Stub Ends

Flare Style

Ni 201 Lap Joint Stub Ends Weight Chart

Nominal Sizes	Weight In KG
1/2	0.04
3/4	0.04
1	0.11
1.1/2	0.18
1.1/4	0.17
2	0.37
2.1/2	0.79
3	1.19
3.1/2	1.59
4	2.04
5	3.4
6	5.44
8	10.43
10	19.5
12	28.12
14	36.29
16	45.36
18	57.15
20	72.57
22	89.36
24	107.95

Nickel 201 Pipe Fittings Delivered Weekly to the Following Countries

Export To	Countries	Continent	Shipping Time (Days)	Ports
	Nigeria	Africa	30	Harcourt
	Brazil	South America	45-60	Rio Grande
	Colombia	South America	45	Cartagena

Nickel 201 Pipe Fittings Price List

● LME Nickel Base Rate

● NPS & Schedule

● Fitting Type

● Seamless vs Welded

● Quantity / MOQ

● Testing & TPI Level

● Destination Port

Get Today’s Nickel 201 Fitting PriceShare drawing/size list for a firm, LME–linked quotation valid 7 days.

Request Price List

ASTM B366 UNS N02201 Tee Temperature Range

Maximum Service Temperature

677°C

1,250°F • ASME Sec. VIII Div.1 Approved

TO

Minimum Service Temperature

-196°C

-321°F • Cryogenic Ductility Retained

Applications of Pure Nickel 201 Pipe Bend

Caustic Soda & Chlor–Alkali Plants

Food & Synthetic Fibre Processing

Chemical Processing & Storage

Electronic & Electrical Components

Marine & Aerospace Assemblies

Battery Terminal & Plater Bar Systems

Heat–Treatment & Combustion Boats

High–Temperature Transfer Lines >315°C

Nickel 201 Elbow Schedule Chart

Size (Inches)	SCH
1/2	Schedule 10
1/2	Schedule 40
3/4	Schedule 10
3/4	Schedule 40
1	Schedule 10
1	Schedule 40
1-1/2	Schedule 10
1-1/2	Schedule 40
1-1/4	Schedule 10
1-1/4	Schedule 40
2	Schedule 10
2	Schedule 40
2-1/2	Schedule 10
2-1/2	Schedule 40
3	Schedule 10
4	Schedule 10

Nickel Alloy 201 Stub End Chemical Composition

Nickel 201 Pipe Fittings Manufacturer in India delivering verified chemical composition reports

Nickel Ni

99.0% Min

Carbon C

0.02% Max

Manganese Mn

0.35% Max

Iron Fe

0.40% Max

Silicon Si

0.35% Max

Copper Cu

0.25% Max

Sulphur S

0.01% Max

Nickel 201 Cross Heat Treatment

Annealing Temperature

750°C – 1,000°C

Solution Annealing (For Welding)

1,100°C – 1,200°C

Stress Relief Annealing

480°C – 650°C

Post–Weld Heat Treatment

700°C – 800°C

 

Monthly Delivery of Nickel 201 Pipe Fittings to Below Countries

Export To	Countries	Continent	Shipping Time (Days)	Ports
	Argentina	South America	45	Buenos Aires
	Singapore	Asia	8	Jurong

LC Nickel 99.2 Collar Mechanical Properties

Tensile Strength

50 KSI Min

345 MPa Min

Yield Strength (0.2%)

12 KSI Min

83 MPa Min

Elongation

30–40%

Gauge Dependent

Hardness

≤140 HB

Rockwell B 45–73

Density

8.89 g/cm³

0.321 lb/in³

Melting Range

1435–1446°C

2615–2635°F

Elastic Modulus

~180 GPa

26 x 10&sup6; PSI

Max Service Temp

315°C

600°F Continuous

Nickel 201 Pipe Fittings Equivalent Grades

 

USA – ASTM/UNS

• ASTM / ASME B366
• UNS N02201
• SAE AMS 5553

 

Germany – DIN/WNR

• Werkstoff Nr. 2.4068
• Werkstoff Nr. 2.4061
• DIN LC–Nickel 99.2

 

UK – BS

• BS NA 12
• BS 3072–3076

 

Japan – JIS

• JIS NW 2201

 

Russia – GOST

• GOST НП-2

 

Trade Names

• VDM® Nickel 201
• Pure Nickel 201
• Ni 201

Alloy 201 Tee Suitable Environment

Environment 01

Chemical Processing

Environment 02

Marine Environments

Environment 03

High–Temperature Service

Environment 04

Cryogenic Applications

Environment 05

Food Processing

Environment 06

Hydrocarbon Processing

Environment 07

Heat Transfer Systems

Difference Between Nickel 200 vs Nickel 201 Pipe Fittings

Most Frequently Compared Nickel Grades

Both are >99% commercially pure wrought nickel under ASTM B160/B161/B366, but the carbon ceiling changes where each grade can safely be used in service.

Nickel 200 – UNS N02200

• Carbon: 0.15% max
• Safe up to 315°C (600°F) continuous service
• Above 315°C: carbon precipitates as graphite at grain boundaries – embrittlement risk
• Standard: ASTM B160 / B161 / B366
• Best for: room–temperature caustic handling, electronic/electrical parts

VS

Nickel 201 – UNS N02201

• Carbon: 0.02% max (low–carbon variant)
• Safe up to 677°C (1,250°F) continuous service
• Low carbon prevents graphitization – retains ductility at high heat
• Standard: ASTM B160 / B161 / B366
• Best for: hot caustic evaporators, chlor–alkali cells, >315°C process lines

Our Dealers and Distributors in Below Country

Saudi Arabia	UAE	Oman	Nigeria	South Africa
USA	Algeria	Kenya	Angola	Tanzania
Ethiopia	Zambia	Ghana	Gabon	Morocco
New South Wales	Mozambique	Egypt	Tunisia	–

Frequently Asked Questions

What is the difference between Nickel 200 and Nickel 201 fittings?

Nickel 201 caps carbon at 0.02% max, which stops graphite forming at temperatures above 315°C – Nickel 200 is not recommended past that point.

Which industries buy Nickel 201 pipe fittings most?

Chlor–alkali, caustic soda evaporation, food processing and synthetic fibre plants are the leading buyers of this grade.

Do you supply both seamless and welded Nickel 201 fittings?

Yes – seamless up to 24″ and welded/fabricated fittings above 24″ are both available ex–stock or on order.

What certification comes with each shipment?

Every consignment carries EN 10204 3.1 mill test certificates; 3.2 third–party certification is available on request.

Can Nickel 201 fittings be used in food–grade applications?

Yes – its high purity and corrosion resistance make it a recognised choice for food and synthetic fibre processing lines.