Commercially Pure Nickel Plate, Rolled For Caustic & High-Purity Service
Dual-Certified UNS N02200 / N02201
Every ASTM B162 Nickel Sheet heat carries verified purity above 99%.
0.1mm To 100mm Rolling Range
Shim sheet to heavy plate rolled to close mill tolerance.
Caustic Soda Grade Reliability
Rated for alkali, seawater and reducing-acid contact lines.
Bright, Mirror & Sandblasted Finish
Cold drawn and polished surface options ready on request.
Cut-To-Size Ready Stock
Sheet, coil, circle and shim packed for immediate export.
Nickel Plate Summary
- 1Product Range: Sheet, Plate, Coil, Circle & Shim
- 2Thickness Coverage: 0.1mm To 100mm
- 3Governing Standard: ASTM B162 / ASME SB162
- 4Working Grades: Nickel 200 (N02200) & Nickel 201 (N02201)
- 5Purity: 99.0% Min Nickel Plus Cobalt
- 6Service Use: Caustic Soda, Chemical, Marine & Electronic Duty
Or call our Mumbai office: +91 22 6743 7134 • Nickel plate batches dispatched with heat-wise MTC 3.1
Our ASTM B162 Nickel Sheet range serves plants needing dependable purity. We roll Nickel Cold Rolled & Hot Rolled Plates for demanding chemical duty. High Nickel Alloy Coils leave our mill slit to buyer-specified width. Nickel Alloy Sheets hold consistent gauge across every rolled coil. A Nickel Alloy Circle blank is available cut to any diameter. ASME SB 162 Nickel Strip stock ships with full heat traceability. Pure Nickel Plates resist alkalis, seawater and many reducing acids well. Nickel Hot Rolled Plates suit heavier structural and vessel fabrication work. ASTM B162 Nickel Shim Sheets arrive slit to precise shim gauge. Nickel Polished Cold Drawn Plates give a clean, paintable working surface finish.
Mumbai · Nickel Alloy Sheet, Plate & Coil Exporter
Nickel Plate & Sheet Pure Finish, Powerful Protection.
Ganpat Industrial rolls, slits and certifies Nickel Cold Rolled & Hot Rolled Plates, Sheets, Coils, Circles and Shim Sheets for buyers who need consistent purity, close gauge control and genuine ASTM B162 chemistry for caustic soda, chemical, marine and electronic duty across India, the GCC and Southeast Asia. Every consignment of Nickel Plate in India leaving our facility ships with heat-wise mill certification.
- ✓ISO 9001:2015
- ✓ASTM B162 & ASME SB162 Certified
- ✓Mill Test Certificate 3.1
- ✓Dual UNS N02200 / N02201 Stock
- ✓Third-Party Inspection Approved
Discover ASTM B162 Nickel Sheet Manufacturer in India with Bright, Mirror & Sandblasted Finish
Nickel Plate Specification
Nickel Cold Rolled & Hot Rolled Plates Material
- UNS N02200 & N02201
- W. Nr. 2.4066 / 2.4068
- Nickel 200 / Nickel 201
- ASTM B162 Grade Certified
ASTM B162 Nickel Shim Sheets Size Range
- Thickness: 0.1mm – 100mm
- Width: 1000 – 2000mm
- Length: 2000 – 6000mm
- Custom Sizes On Drawing
Nickel Alloy Sheets Testing
- Spectro / PMI Testing
- Tensile & Hardness Test
- Ultrasonic Test (UT)
- Third-Party Inspection
Pure Nickel Plates Finish
- Bright Annealed
- Mirror Polished
- Sandblasted / Matte
- 2B / No.1 Mill Finish
ASME SB162 Nickel Coils Documentation
- Mill Test Certificate 3.1
- NABL Lab Report
- Packing List
- Certificate Of Origin
Nickel Strips Origin
- Indian Origin
- European Origin
- US Origin
- Heat-Number Traceable
ASME SB162 Nickel Plate Standard Size Chart
Standard Width
1000 – 2000mm
Nickel Cold Rolled Plates mill width
Standard Length
2000 – 6000mm
Nickel Hot Rolled Plates cut length
Circle Diameter
100 – 1500mm
Nickel Alloy Circle blanking size
Coil Width
Up To 1250mm
High Nickel Alloy Coils slit width
Weekly Delivery Of Nickel Plate In Below Countries
We maintain ready stock for fast delivery of Nickel Plate in India.
| Export To | Continent | Port | Shipping Time |
|---|---|---|---|
Singapore |
Asia | Keppel Port | 8 Days |
Mexico |
North America | Veracruz Port | 45 Days |
South Africa |
Africa | Durban Port | 25-30 Days |
Shop Nickel Cold Rolled & Hot Rolled Plates in Thickness 0.1mm to 100mm for Caustic Soda Applications at Best Price per kg
Nickel Polished Cold Drawn Plates Thickness Range
Shim Sheet
0.1mm – 0.5mm precision gauge
Cold Rolled Sheet
0.5mm – 3mm bright finish
Medium Plate
3mm – 25mm fabrication stock
Heavy Hot Rolled Plate
25mm – 100mm vessel grade
Custom Gauge
Rolled to buyer’s drawing on request
Need A Specific Gauge For Your Project?Share thickness & application – we confirm mill availability fast.
ASTM B162 Nickel Plate Dimension Tolerance
Thickness Tolerance
±0.01 – ±0.5mm
Depending on nominal gauge ordered
Width Tolerance
±3mm
Standard mill-slit width variance
Length Tolerance
+10 / -0mm
Standard sheared cut-to-length plate
Flatness
<5mm / Meter
Levelled sheet and plate stock
Types Of Nickel Plate We Supply
As a trusted Nickel Plate manufacturer in India, we stock every listed type.
ASTM B162 Nickel Sheet
N02200
Nickel Cold Rolled Plates
CR
Nickel Hot Rolled Plates
HR
High Nickel Alloy Coils
Coil
ASTM B162 Nickel Shim Sheets
Shim
Nickel Cold Rolled Plates
CR2
Nickel Polished Cold Drawn Plates
Polished
Nickel Strips
Strip
Monthly Delivery Of Nickel Plate In Below Countries
| Export To | Continent | Port | Shipping Time |
|---|---|---|---|
Vietnam |
Asia | Vũng Tàu Port | 10 Days |
Saudi Arabia |
Asia | Abdullah Port | 7 Days |
Need A Trial Order Before Bulk Purchase?We ship LCL quantities of Nickel Plate for first-time buyers.
Testing Methods For Nickel Alloy Plate
Every Nickel Plate in India shipment passes strict testing before final dispatch.
Chemical Analysis – Spectro Test
Spectrometer reading confirms nickel purity against grade chemistry
Every Heat
Tensile & Yield Test
Confirms tensile and yield strength meet ASTM B162 minimums
Every Batch
Hardness Test
Rockwell B / Brinell reading verified against temper class
Every Batch
Ultrasonic Test (UT)
Detects internal lamination on heavy hot rolled plate
On Request
Positive Material Identification (PMI)
Handheld alloy analyzer confirms grade before packing
Every Batch
ASTM B162 Nickel Plate Chemical Composition
Reference chemistry for Nickel 200 (N02200) plate stock as per ASTM B162 / ASME SB162.
| Element | Nickel 200 (%) | Nickel 201 (%) |
|---|---|---|
| Carbon (C) | ≤ 0.15 | ≤ 0.02 |
| Nickel (Ni) | ≥ 99.0 | ≥ 99.0 |
| Copper (Cu) | ≤ 0.25 | ≤ 0.25 |
| Silicon (Si) | ≤ 0.35 | ≤ 0.35 |
| Sulfur (S) | ≤ 0.01 | ≤ 0.01 |
| Manganese (Mn) | ≤ 0.35 | ≤ 0.35 |
| Iron (Fe) | ≤ 0.40 | ≤ 0.40 |
Need A Grade-Matched Chemistry Report?Share your process media & temperature – we confirm the right grade.
Mechanical Properties Of Nickel Hot Rolled Plate
Nickel 200 Yield Strength
105-275 MPa
15-40 ksi
Nickel 200 Tensile Strength
380-550 MPa
55-80 ksi
Nickel 200 Elongation
40-60%
In 2″ Gauge
Nickel 200 Hardness
90-140 HB
45-73 HRB
Nickel 201 Yield Strength
83-240 MPa
12-35 ksi
Nickel 201 Tensile Strength
345-485 MPa
50-70 ksi
Nickel 201 Elongation
40-60%
In 2″ Gauge
Nickel 201 Service Rating
Above 315°C
Low-Carbon Grade
Nickel Plate Equivalent Material Chart
ASTM / UNS
- ASTM B162 / ASME SB162 Plate, Sheet & Strip
- UNS N02200 (Nickel 200)
- UNS N02201 (Nickel 201)
DIN / Werkstoff Nr.
- Werkstoff Nr. 2.4066 (Nickel 200)
- Werkstoff Nr. 2.4068 (Nickel 201)
- DIN 17750 / EN 10204-3.1 Reference
JIS / Trade Name
- JIS NW2200 / NW2201 Reference
- Pure Nickel Plate (Special Metals Trade Name)
- Often Searched As Alloy 200 / 201 Plate
Comparing Nickel Grades For A New Project?Send your process media & temperature – we recommend the right grade.
HSN Code & GST Rate On Nickel Plate
HSN Code
7506
Nickel Plates, Sheets, Strip & Foil
GST Rate
18%
Standard rate on domestic sale
Export Status
Zero-Rated
Under LUT / Bond For Exports
Country Of Origin
India
Certificate Of Origin issued per order
Nickel Cold Rolled Plate Weight Calculation Formula
Density
8.89 g/cm³
Reference density, Nickel 200 & 201
Sheet Formula
L×W×T×8.89
Length, width, thickness in metres, kg result
Circle Formula
0.785×D²×T×8.89
Diameter & thickness in metres, kg result
Need Exact Weight?
Ask Us
Share size & grade for a calculated sheet
Nickel 200 Vs Nickel 201 Plate Comparison
Nickel 200 (N02200) Plate
- Carbon up to 0.15%, standard purity grade
- Best below 315°C (600°F) service
- Preferred for general chemical & caustic duty
- Widely stocked, moderate lead time
Nickel 201 (N02201) Plate
- Carbon capped at 0.02%, low-carbon grade
- Rated for service above 315°C (600°F)
- Preferred for high-temperature caustic evaporators
- Better formability for deep drawing work
Nickel Plate Price Per Kg & Cost Factors
Get Today’s Nickel Plate Price Per KgShare thickness, grade and quantity for an instant costed quote.
Surface Finish Options For Nickel Alloy Plate
Bright Annealed Finish
Furnace anneal gives a clean, reflective face
Mirror Polished Finish
High-gloss surface for hygienic & display duty
Sandblasted Finish
Uniform matte texture ahead of coating
Pickled & Passivated
Acid treatment strips scale, rebuilds oxide layer
Nickel Polished Cold Drawn
Smooth, paintable surface for precision parts
Application Industries Of Nickel Plate
Choose a Nickel Plate Supplier in India, like us for a standard rolled range.
Caustic Soda & Chlor-Alkali Plants
Chemical & Petrochemical Processing
Marine & Offshore Structures
Aerospace & Electronic Components
Battery & Electroplating Industry
Food Processing Equipment
Furnace & Heat-Treatment Fixtures
Caustic Evaporator & Combustion Boats
Manufacturing Process Of ASTM B162 Nickel Plate
Raw Billet Selection & Melting
Certified nickel billet chosen against grade chemistry
Hot Rolling
Heavy slab reduced to plate thickness and width
Cold Rolling & Slitting
Coil rolled thinner and slit to ordered width
Annealing & Descaling
Controlled anneal restores softness and surface clarity
Leveling, Inspection & Packing
Flatness check, PMI test and heat-number stamping before dispatch
Need A Plate Cut To Your Drawing?Send size & grade – we confirm rolling schedule and price.
Test Certificates We Provide With Nickel Strip
EN 10204 3.1 Mill Test Certificate
Every Nickel Plate batch ships with a heat-traceable mill certificate confirming chemistry, mechanical properties and applicable ASTM B162 standard.
Export Documentation For Nickel Alloy Sheets
We are a recognized Nickel Plate Supplier in India, so shipment arrives fully documented.
Mill Test Certificate 3.1
Heat-wise chemistry and mechanical property report
Every Lot
Certificate Of Origin
Country-of-manufacture proof for customs clearance
Every Shipment
Packing List & Commercial Invoice
Bundle-wise weight, dimension and value declaration
Every Shipment
NABL Lab Report
Independent chemical and mechanical verification
On Request
Fumigation Certificate
Required for wooden crate export packing
Wooden Crates
Frequently Asked Questions
What is the price of Nickel Plate per kg?
Price depends on grade, thickness, finish and quantity; share specification for exact quote.
What size range is available in ASTM B162 Nickel Sheet?
We supply standard sheets up to 1500 x 6000mm, custom sizes cut to drawing.
Which HSN code applies to Nickel Alloy Sheets in India?
Nickel plate and sheet fall under HSN code 7506, taxed at 18% GST.
Is there a minimum order quantity for Nickel Cold Rolled Plates?
No fixed MOQ; we supply single sheets and full container export quantities on request.
What is the difference between Nickel 200 and Nickel 201 Plate?
Nickel 201 has lower carbon, giving better performance above 315°C service temperature.
Our Dealers and Distributors Are Present in the Country Mentioned Below
| Saudi Arabia | UAE | Oman | Nigeria | South Africa |
| USA | Algeria | Kenya | Angola | Tanzania |
| Ethiopia | Zambia | Ghana | Gabon | Morocco |
| New South Wales | Mozambique | Egypt | Tunisia | – |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA