Why Buyers Choose Ganpat Industrial Corporation For SS 304 Angles?
Since 1997
Mumbai forging house and metal stockist
ISO 9001:2015
Certified quality system on every lot
ISO 14001:2015
Certified environmental management
PED & Petrofac Approved
Accepted for pressure and Petrofac vendor lists
MTC With Every Lot
Grade proof travels with dispatch
SS 304 Angle Snapshot
- 1Grade: UNS S30400 • AISI 304 • EN
1.4301 - 2Standards: ASTM A276 • ASTM A479
- 3Shapes: Equal, unequal, L, C, U, H and beam
- 4Finish: Hot rolled, bright, polish, cold
drawn - 5Typical Range: Legs 20 to 200 mm • Thickness 3
to 20 mm - 6Length: 6 m standard • Cut sizes on
request
Ganpat Industrial Corporation has served Mumbai and export buyers since 1997. Our 304 Angles cover equal, unequal and L profiles. Stainless Steel UNS S30400 Angle stock suits fabricators, OEMs and EPC teams. Use SS 304 Unequal Leg Angles for edges and offset fixing. Choose 304 Stainless Unequal Angle when one leg must run wider. Pick SS 304 Cold Drawn Angles when you need tighter sizes. Our Stainless Steel 304 Structural Angle follows ASTM A276 Type 304 limits. Add 304 SS C Channel or Stainless Steel 304 Beam to the same enquiry.
Mumbai · Angle, Channel & Beam Stockist and Exporter
Mill-Certified Stainless Steel 304 Structural Angle For Frames And Supports
Buy SS 304 Angles in equal and unequal leg sizes. Get weight-based estimates fast.
- ✓ISO 9001:2015
- ✓ISO 14001:2015
- ✓OHSAS 18001:2007
- ✓PED Certified
- ✓Petrofac Approved
UNS & EN
S30400
EN 1.4301, AISI 304
Chromium • Nickel
18-20% • 8-11%
ASTM A276 limits
Governing Standard
ASTM A276
Bars and shapes
Hot Finished Strength
515 MPa min
205 MPa min yield
High Strength SS 304 Channel Supplier in India with MTC
SS 304 Angle Specification
Check this sheet before ordering Stainless Steel 304 Structural Angle.
Material Grade
- UNS S30400 • AISI 304
- EN 1.4301 • X5CrNi18-10
- 18-8 chromium-nickel austenitic
Standards
- ASTM A276 bars and shapes
- ASTM A479 also listed
- Tolerances per ASTM A484
Shapes
- Equal and unequal leg angles
- L angle, C and U channel
- H beam and beam
Finish
- Hot rolled mill finish
- Bright and polish
- Cold drawn
Size Range
- Legs 20 to 200 mm
- Thickness 3 to 20 mm
- 6 m length or cut sizes
Documents
- MTC with every lot
- Third-party inspection on request
Procure SS 304 Equal & Unequal Leg Angle in Hot Rolled Finish with Instant Weight Chart
304 Stainless Steel Angle Bar Weight Chart
Estimate load and cost before you place the order.
| Size (A x B x t, mm) | Kg Per Metre | Kg Per 6 m Length |
|---|---|---|
| 25 x 25 x 3 | 1.13 | 6.78 |
| 25 x 25 x 5 | 1.78 | 10.68 |
| 40 x 40 x 3 | 1.83 | 10.98 |
| 40 x 40 x 5 | 2.97 | 17.82 |
| 50 x 50 x 5 | 3.78 | 22.68 |
| 63 x 63 x 8 | 7.50 | 45.00 |
| 65 x 65 x 5 | 5.02 | 30.12 |
| 75 x 75 x 6 | 6.85 | 41.10 |
| 80 x 80 x 6 | 7.35 | 44.10 |
| 80 x 80 x 10 | 11.98 | 71.88 |
Leg Width
20 – 200 mm
Typical range
Thickness
3 – 20 mm
Typical range
Length
6 m
Standard length
Cut Sizes
On Request
Share your drawing
SS S30400 Angle Size Chart In mm
Match leg size and thickness to your drawing.
| Angle Type | Leg Size (mm) | Thickness (mm) | Length |
|---|---|---|---|
| Equal Angle | 25 x 25 | 3 – 5 | 6 m |
| Equal Angle | 40 x 40 | 3 – 6 | 6 m |
| Equal Angle | 50 x 50 | 5 – 8 | 6 m |
| Equal Angle | 65 x 65 | 6 – 10 | 6 m |
| Unequal Angle | 40 x 20 | 3 – 12 | 6 m |
| Unequal Angle | 100 x 50 | 3 – 12 | 6 m |
| Unequal Angle | 150 x 75 | 3 – 12 | 6 m |
Channel Base
80 – 150 mm
C and U channel
Channel Side
40 – 75 mm
Flange width
Channel Thickness
5 – 6 mm
Size dependent
Cut Lengths
3 – 6 m
Or custom cut
Types Of 304 Stainless Steel Angle We Supply
Buy from an SS 304 Angle supplier in India with ready stock.
SS 304 Equal Angle
Equal Leg
304 Stainless Unequal Angle
Unequal Leg
304 SS L Angle
L Section
Stainless Steel 304 Bright Angle
Bright
SS 304 Polish Angle
Polished
SS 304 Cold Drawn Angles
Cold Drawn
304 SS C Channel
C Section
304 Stainless Steel U Channel
U Section
Stainless Steel 304 H Beam
H Section
Stainless Steel 304 Beam
Beam
SS 304 Equal Angle vs Unequal Leg Angles
Pick The Leg Layout First
Leg layout decides fit, load path and cost.
Equal Leg Angle
- Both legs share one width
- Suits frames, braces and brackets
- Weight chart above applies directly
Unequal Leg Angle
- One leg is wider than the other
- Suits edge trims and offset fixing
- Share both leg sizes for a quote
Stainless Steel 1.4301 Angle Finishes
Hot Rolled
- Standard structural mill finish
- Suits frames and supports
Bright
- Stainless Steel 304 Bright Angle
- Smooth look for visible work
Polish
- SS 304 Polish Angle
- Decorative, easy-clean surface
Cold Drawn
- SS 304 Cold Drawn Angles
- Tighter sizes, smoother surface
Weekly Delivery Of SS 304 Angles In Below Countries
| Export To | Continent | Port | Shipping Time |
|---|---|---|---|
 |
South America | Santos Port | 23-55 Days |
 |
Africa | Durban Port | 15-33 Days |
Chemical Composition Of ASTM A276 Stainless Steel 304 Angles
ASTM A276 Type 304 Limits
Heat analysis limits for UNS S30400.
IronFe
Balance
ChromiumCr
18.0 – 20.0%
NickelNi
8.0 – 11.0%
ManganeseMn
2.00% max
SiliconSi
1.00% max
CarbonC
0.08% max
PhosphorusP
0.045% max
SulphurS
0.030% max
Mechanical Properties Of 304 Stainless Steel U Channel
Minimum values for Type 304, Condition A.
| Finish | Size | Tensile MPa (ksi) | Yield MPa (ksi) | Elong. (%) | RA (%) |
|---|---|---|---|---|---|
| Hot finished | All | 515 (75) | 205 (30) | 40 | 50 |
| Cold finished | Up to 1/2 in (12.7 mm) | 620 (90) | 310 (45) | 30 | 40 |
| Cold finished | Over 1/2 in (12.7 mm) | 515 (75) | 205 (30) | 30 | 40 |
304 Stainless Steel Angle Equivalent Grades
One Grade, Many Nameplates
Match your drawing callout below.
UNS • AISI
- UNS S30400
- AISI 304
EN • DIN
- EN 1.4301
- X5CrNi18-10
JIS • ASTM
- SUS304
- ASTM A276 Type 304
304 SS C Channel, U Channel & H Beam Supply
Find a trusted SS 304 Angle supplier in India for channels and beams too.
304 SS C Channel
- Web and flange sizes on request
- Covered under ASTM A276 shapes
304 Stainless Steel U Channel
- For guides, rails and trims
- Cut lengths on request
H Beam & Beam
- Stainless Steel 304 H Beam for frames
- Share section size and length
Applications Of Stainless Steel 304 Structural Angle
Clean, rust-resistant frames for daily industrial use.
Food Processing Frames
Dairy Plant Supports
Chemical Plant Skids
Pharma Facility Fit-Out
Kitchen Equipment
Architectural Trim
Machine Bases
Conveyor Frames
SS 304 Angles Monthly Delivery In Below Nation
| Export To | Continent | Port | Shipping Time |
|---|---|---|---|
 |
Asia | Shenzhen Port | 9 Days |
 |
Africa | Lagos Port | 27 Days |
Testing & Inspection Of 304 SS L Angle
Buy from a leading SS 304 Angle manufacturer in India with global exports.
Chemical Check
Cr and Ni against A276 limits
Tensile & Yield
Proof of strength values
Elongation
Ductility check on samples
Dimensions
Leg, thickness and length check
Visual & Finish
Surface, edge and marking review
Third-Party Review
Arranged on request
Documents Supplied With SS 304 Cold Drawn Angles
Mill Test Certificate
Heat-wise chemical and mechanical results
Every Lot
Test Report
Tensile and yield values as needed
On Request
Packing List & Invoice
Size-wise quantity and weight
With Dispatch
Inspection Report
Third-party witness for your project
On Request
SS 304 Angle Price In India
Quote Built On Your Size List
Rates follow nickel, so we quote on the day.
Send leg sizes and lengths. Get per-kg pricing fast.
Associate Traders and Importers available in Below Locations For Quick Deliveries
| Continents | Country |
|---|---|
| Africa | Nigeria, Egypt, South Africa, Kenya, Ghana, Ethiopia |
| North America | United States, Canada, Mexico, Cuba |
| South America | Brazil, Argentina, Colombia, Chile, Peru |
| Asia | India, Japan, South Korea, Indonesia, Saudi Arabia, Iran |
| Europe | Germany, France, UK, Italy, Spain, Poland, Ukraine |
| Australia | New Zealand, Papua New Guinea, Fiji, Samoa |
SS 304 Angle Frequently Asked Questions
How do I calculate SS 304 Polish Angle weight?
Use the weight chart above. Or use (A + B − t) × t × 0.00793 for kg per metre.
What are the standard sizes of SS 304 angle?
Legs run 20 to 200 mm. Thickness runs 3 to 20 mm, usually in 6 m lengths.
Should I choose 304 or 316 angle?
Choose 316 for strong chloride exposure. Grade 304 suits general service.
What is the difference between equal and unequal leg angles?
Equal angles have matching legs. Unequal angles have one wider leg for offset fixing.
Which standard covers 304 SS L Angle?
ASTM A276 covers angles, tees and channels in Type 304.
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA