SS 304 Seamless Pipe Manufacturer in India At Affordable Price

Stainless Steel 304 Pipe Specification

Ganpat Industrial Corporation is one of the pioneer manufacturers & exporter for high quality Stainless Steel 304
Pipe, where low nickel content of it makes them price stable. Stainless Steel 304 Seamless Pipes is mainly due to
advances in steelmaking techniques particularly with respect to control of nitrogen content. The high mechanical
strength of AISI 304 Welded Pipes is a result of the duplex microstructure and the alloying with nitrogen. Jindal
304 Stainless Steel Pipe are formed from an approximately 50 / 50 mixture of austenitic and ferritic phases and are
sometimes referred to as austenitic – ferritic stainless steels. SS 304 Schedule 10 Square Pipe gives them a
significant advantage over 300 and 400 series stainless steels. SUS 304 EFW Pipes has a higher strength material
than conventional austenitic stainless steels and standard duplex grades. SS 304 welded pipe is used in a wide range
of applications in industries such as oil, gas, paper, chemical, and marine. Stainless Steel 304 Square Pipes
combine the best attributes of both austenitic and ferritic stainless steels and provide high strength/ductility
with good corrosion resistance to corrosion (including stress corrosion cracking). This high strength of SUS 304 ERW
Pipe gives opportunities for reducing both weight and cost as a thinner material can be used. The standard
austenitic INOX 304 Pipes are relatively easy to make and to fabricate. As their names imply, ss 304 sch 10 pipe
consist mainly of one phase, austenite or ferrite.

Table Of Content

Jindal Stainless Steel Pipe 304 Price List

Size in Inches Price in USD
5″ US $ 174.78
1 1/2″ US $ 42.73
1/2″ US $ 11.15
2″ US $ 46.71
3″ US $ 78.37
2.5″ US $ 59.16
3/4″ US $ 15.09
1/4″ US $ 7.27
3.5″ US $ 114.62
6″ US $ 234.25
3/8″ US $ 10.59
4″ US $ 114.90

Specification Of Stainless Steel 304 Pipe

Stainless Steel 304 Pipe Manufacturer in India, offering high-quality products for various industrial applications.

Stainless Steel 304 Seamless Pipe Sizes
Stainless Steel 304 Seamless Pipe Sizes
  • Length:Single/ Double
  • OD: 1/8 – 12″ NPS
  • WT:0.6 -12.7 mm
  • Schedule: 5 to XXH
304 SS Thick Wall Pipe Sizes
304 SS Thick Wall Pipe Sizes
  • Length: 0.5 to 12 Meter
  • OD: 10-600mm
  • WT: 2.5 – 100mm
  • Standard: ASTM A312 | ASME SA 312
INOX 304 Welded Pipe Sizes
INOX 304 Welded Pipe Sizes
  • Length:up to 26 Meters
  • OD: 6.35 to 114.3 mm
  • WT: 0.8 to 12.7 mm
  • Schedule: 5 to 80S
SUS 304 Square Pipe Technique
SUS 304 Square Pipe Technique
  • Hot Formed
  • Precision Rolled,
  •  Cold Formed

 

WNR 1.4301 Pipe Form
WNR 1.4301 Pipe Form
  • Oval
  • Rectangular
  • Round
  • Square
304 Stainless ERW Pipe Testing
304 Stainless ERW Pipe Testing
  • PMI
  • Mechanical
  • Chemical
  • Ultrasonic
SS 304 Welded Pipe Packaging
SS 304 Welded Pipe Packaging
  • Bubble wraps
  • Custom
  • Steel Strips Bundled
  • Wooden Boxes
UNS S30400 Seamless Pipe End
UNS S30400 Seamless Pipe End
  • Beveled
  • Plain
Stainless Steel 304 Seamless Pipe Documentation
Stainless Steel 304 Seamless Pipe Documentation
  • NABL Approved Lab Reports
  • Raw Material Test Reports
AISI 304 Round Pipe Finish
AISI 304 Round Pipe Finish
  • Bright
  • Annealing
  • Mirror
  • Polished
SS 304 Welded Pipe Manufacturing Process
SS 304 Welded Pipe Manufacturing Process
  • Fabricated
  • ERW
  • Seamless
  • Welded
INOX 304 Seamless Pipe Origin
INOX 304 Seamless Pipe Origin
  • Indian Origin
  • Japanese Origin
  • European Origin
  • Korean Origin

Top UNS S30400 Welded and ERW Pipe Suppplier in Mumbai With OD 6.35 to 114.3 mm

304 Stainless Steel Pipe Sizes

ASTM A312 SS 304 Pipe OD
mm		 Sch Kg/m Pipe WT
mm		 Inches.
13.72 10S 0.50 1.65 1/4
33.40 40S 2.54 3.38 1
42.16 40S 3.44 3.56 1¼
17.15 40S 0.86 2.31 3/8
101.60 40S 13.78 5.74 3½
88.90 40S 11.47 5.49 3
21.34 10S 1.02 2.11 1/2
60.33 40S 5.52 3.91 2
73.03 80S 11.59 7.01 2½
114.30 160 34.05 13.492) 4
168.28 80S 43.21 10.97 6
141.30 80S 31.44 9.53 5
219.08 80S 65.63 12.7 8
17.15 10S 0.64 1.65 3/8
48.26 40S 4.11 3.68 1½
26.67 10S 1.30 2.11 3/4
42.16 160 5.69 6.352) 1¼

Get Schedule 10/40/80 WNR 1.4301 Square and Rectangular Pipe Stock For Sale, Refer Schedule Chart and Thickness

WNR 1.4301 Square Pipe Thickness Chart

Nominal Pipe Size (NPS) Outside Diameter (OD) Wall Thickness (Schedule 10)
1″ 1.315″ (33.40 mm) 0.109″ (2.77 mm)
1-1/2″ 1.900″ (48.26 mm) 0.109″ (2.77 mm)
20″ 20.000″ (508.00 mm) 0.218″ (5.54 mm)
24″ 24.000″ (609.60 mm) 0.218″ (5.54 mm)
2″ 2.375″ (60.33 mm) 0.109″ (2.77 mm)
3″ 3.500″ (88.90 mm) 0.120″ (3.05 mm)
5″ 5.563″ (141.30 mm) 0.134″ (3.40 mm)
8″ 8.625″ (219.08 mm) 0.148″ (3.76 mm)
10″ 10.750″ (273.05 mm) 0.165″ (4.19 mm)
6″ 6.625″ (168.28 mm) 0.134″ (3.40 mm)
12″ 12.750″ (323.85 mm) 0.180″ (4.57 mm)
8″ 8.625″ (219.08 mm) 0.148″ (3.76 mm)
10″ 10.750″ (273.05 mm) 0.165″ (4.19 mm)
1-1/4″ 1.660″ (42.16 mm) 0.109″ (2.77 mm)
14″ 14.000″ (355.60 mm) 0.188″ (4.78 mm)
16″ 16.000″ (406.40 mm) 0.188″ (4.78 mm)
18″ 18.000″ (457.20 mm) 0.188″ (4.78 mm)
4″ 4.500″ (114.30 mm) 0.120″ (3.05 mm)
1/8″ 0.405″ (10.29 mm) 0.049″ (1.24 mm)
1/4″ 0.540″ (13.72 mm) 0.065″ (1.65 mm)
3/8″ 0.675″ (17.15 mm) 0.065″ (1.65 mm)
1/2″ 0.840″ (21.34 mm) 0.083″ (2.11 mm)
3-1/2″ 4.000″ (101.60 mm) 0.120″ (3.05 mm)
3/4″ 1.050″ (26.67 mm) 0.083″ (2.11 mm)

Stainless Steel 304 Pipe Schedule Chart

Nominal Bore Outside Diameter Sch-40S Sch-10S Sch-160S Sch-5S Sch-80S Sch-XXS
mm INCH mm Weight (Kg/mt) Wt mm Weight (Kg/mt) Wt mm Wt mm Weight (Kg/mt) Wt mm Weight (Kg/mt) Weight (Kg/mt) Wt mm Weight (Kg/mt) Wt mm
300 12 323.9 73.88 9.52 36.00 4.57 33.32 238.76 3.96 31.25 132.0 12.7 186.97 25.40
10 3/8 17.1 0.845 2.31 0.63 1.65 – – 1.24 0.490 1.10 3.20 – –
150 6 168.3 28.3 7.11 13.84 3.40 18.2 67.56 2.77 11.32 42.7 10.97 79.22 21.95
25 1 33.4 2.50 3.38 2.09 2.77 6.35 4.24 1.65 1.30 3.24 4.55 5.45 9.09
15 1/2 21.3 1.27 2.77 1.00 2.11 4.75 1.94 1.65 0.800 1.62 3.75 2.55 7.47
32 1 1/4 42.2 3.38 3.56 2.70 2.77 6.35 5.61 1.65 1.65 4.47 4.85 7.77 9.70
40 1 1/2 48.3 4.05 3.68 3.11 2.77 7.14 7.25 1.65 1.91 5.41 5.08 9.54 10.16
50 2 60.3 5.44 3.91 3.93 2.77 8.74 11.1 1.65 2.40 7.48 5.54 13.44 11.07
65 2 1/2 73.0 8.63 5.16 5.26 3.05 9.53 14.9 2.11 3.69 11.4 7.01 20.39 14.2
600 24 609.6 255.41 17.48 94.45 6.35 59.54 808.22 5.54 82.47 442.08 30.96 – –
80 3 88.9 11.30 5.49 6.45 3.05 11.1 21.3 2.11 4.51 15.2 7.62 27.65 15.24
100 4 114.3 16.07 6.02 8.36 3.05 13.49 33.54 2.11 5.84 22.3 8.56 41.03 17.12
3 1/8 10.3 0.37 1.73 0.28 1.24 – – 1.24 0.276 0.47 2.41 – –
125 5 141.3 21.8 6.55 11.57 3.40 15.88 49.11 2.77 9.47 31.97 9.53 57.43 19.05
200 8 219.1 42.6 8.18 19.96 3.76 23.0 111.2 2.77 14.79 64.6 12.7 107.8 22.23
250 10 273.1 60.5 9.27 27.78 4.19 28.6 172.4 3.40 22.63 96.0 12.7 155.15 25.40
350 14 355.6 94.59 11.13 41.3 4.78 35.71 281.70 3.96 34.36 158.08 19.05 – –
400 16 406.4 123.30 12.7 47.29 4.78 40.46 365.11 4.19 41.56 203.33 21.41 – –
6 1/4 13.7 0.631 2.24 0.49 1.65 – – 1.24 0.390 0.80 3.02 – –
20 3/4 26.7 1.68 2.87 1.28 2.11 5.54 2.89 1.65 1.03 2.20 3.91 3.63 7.82
450 18 457.2 155.80 14.27 53.42 4.78 45.71 466.40 4.19 46.80 254.36 23.8 – –
500 20 508.0 183.42 15.09 68.71 5.54 49.99 564.68 4.78 59.25 311.2 26.19 – –
Offer AISI 304 Exhaust Pipe With Bright and Polished Finish For Various Industrial Application

UNS S30400 Pipe Application

  • Food processing
  • Chemical and petrochemical industries
  • Pharmaceutical and biotechnology
  • HVAC and refrigeration systems
  • Marine and offshore applications
  • Heat exchangers
  • Nuclear plants

Most Common Types Of SS 304 Pipes

Stainless Steel 304 Pipe Supplier in India, available in full size and custom cut lengths.

Stainless Steel 304 Seamless Pipe

Stainless Steel 304 Seamless Pipe

SS 304 ERW Pipe

SS 304 ERW Pipe

WNR 1.4301 Square Pipe

WNR 1.4301 Square Pipe

304 SS Welded Pipe

304 SS Welded Pipe

AISI 304 Rectangular Pipe

AISI 304 Rectangular Pipe

INOX 304 Round pipe

INOX 304 Round pipe

Find 100 % Tested Hot and Cold Formed 304 Stainless Steel Round Pipe Online , Check Pressure Rating

304 Stainless Steel Pipe Pressure Rating

Pipe Size
(inches)		 OD
(in)		 WT
(in)		 Pipe Schedule Pressure Rating (psig)
Temperature (oF)
100 200 300 400 500 600 650 700 750
Allowable Stress (psi)
16700 16700 16700 15500 14400 13500 13200 12900 12600
6″ 6.625 0.280 40 877 877 877 814 756 709 693 677 661
6.625 0.432 80 1379 1379 1379 1280 1189 1115 1090 1065 1040
6.625 0.719 160 2382 2382 2382 2211 2054 1925 1883 1840 1797
1 1/2″ 1.900 0.145 40 1629 1629 1629 1512 1404 1317 1287 1258 1229
1.900 0.200 80 2303 2303 2303 2138 1986 1862 1821 1779 1738
1.900 0.281 160 3362 3362 3362 3120 2899 2717 2657 2597 2536
2″ 2.375 0.154 40 1371 1371 1371 1272 1182 1108 1083 1059 1034
2.375 0.218 80 1985 1985 1985 1843 1712 1605 1569 1534 1498
2.375 0.344 160 3283 3283 3283 3047 2831 2654 2595 2536 2477
3″ 3.500 0.216 40 1301 1301 1301 1208 1122 1052 1028 1005 982
3.500 0.300 80 1844 1844 1844 1712 1590 1491 1458 1425 1391
3.500 0.438 160 2787 2787 2787 2587 2403 2253 2203 2153 2103
10″ 10.750 0.365 40 699 699 699 649 603 565 553 540 528
10.750 0.594 80 1159 1159 1159 1075 999 937 916 895 874
10.750 1.125 160 2289 2289 2289 2124 1974 1850 1809 1768 1727
4″ 4.500 0.237 40 1102 1102 1102 1023 950 891 871 851 831
4.500 0.337 80 1596 1596 1596 1482 1377 1291 1262 1233 1204
4.500 0.531 160 2611 2611 2611 2424 2552 2111 2064 2017 1970
1″ 1.315 0.133 40 2205 2205 2205 2047 1902 1783 1743 1703 1664
1.315 0.179 80 3061 3061 3061 2841 2640 2475 2420 2365 2310
1.315 0.250 160 4493 4493 4493 4170 3874 3632 3552 3471 3390
8″ 8.625 0.322 40 771 771 771 716 665 623 610 596 582
8.625 0.500 80 1218 1218 1218 1131 1050 985 963 941 919
8.625 0.906 160 2298 2298 2298 2133 1982 1858 1817 1775 1734
5″ 5.563 0.258 40 965 965 965 896 832 780 763 746 728
5.563 0.375 80 1428 1428 1428 1325 1231 1154 1129 1103 1077
5.563 0.625 160 2474 2474 2474 2296 2133 2000 1955 1911 1866

INOX 304 Welded Pipe Weight Chart

Designation of Diameter O/D Nominal Wall Thickness
DIA SCH 80 S SCH 80 SCH 100 SCH 120 SCH. 140 SCH.160 SCH.XXS
(A) (B) Meter mm Wall Thk Weight Kg/Mtr Wall Thk Weight Kg/Mtr Wall Thk Weight Kg/Mtr Wall Thk Weight Kg/Mtr Wall Thk Weight Kg/Mtr Wall Thk Weight Kg/Mtr Wall Thk Weight Kg/Mtr
600 24 609.6 12.7 189.82 30.94 448.3 38.89 555.76 46.02 649.44 52.37 730.72 59.51 819.7 – –
8 1/4 13.7 3.02 0.82 – – – – – – – – – – – –
20 3/4 26.7 3.91 2.93 – – – – – – – – 5.54 2.93 7.82 3.69
80 3 88.9 7.62 15.51 – – – – – – – – 11.13 21.67 15.24 28.11
250 10 273.1 12.7 82.8 15.06 97.27 18.24 116.38 21.41 134.9 25.4 157.51 28.58 174.95 25.4 155.5
150 6 168.3 10.97 43.21 – – – – 14.27 55.03 – – 18.24 68.53 21.95 79.1
400 16 406.4 12.7 125.2 21.41 206.4 26.19 249.34 30.94 290.88 36.53 338.32 40.46 370.74 – –
6 1/8 10.3 2.41 0.47 – – – – – – – – – – – –
40 11/2 48.3 5.08 5.49 – – – – – – – – 7.14 7.35 10.16 9.69
65 21/2 73 7.01 11.59 – – – – – – – – 9.53 15.15 14.02 20.72
200 8 219.1 12.7 65.63 – – 15.06 76.93 18.24 91.73 20.62 102.47 23.01 112.97 22.23 108
10 3/8 17.2 3.2 1.12 – – – – – – – – – – – –
50 2 60.3 5.54 7.6 – – – – – – – – 8.71 11.26 11.07 13.65
300 12 323.9 12.7 98.95 17.45 133.88 21.41 162.14 25.4 189.82 28.58 211.31 33.32 242.4 25.4 189.82
350 14 355.6 12.7 109.04 19.05 160.54 23.8 197.74 27.76 227.88 31.75 257.47 35.71 286.04 – –
90 31/2 101.6 8.08 18.92 – – – – – – – – – – 16.15 34.56
550 22 558.8 12.7 173.66 28.57 379.7 34.92 457.83 41.27 535.17 47.62 609.3 53.97 682.57 – –
100 4 114.3 8.56 22.66 – – – – 11.13 28.75 – – 13.49 34.05 17.12 41.66
125 5 141.3 9.53 31.44 – – – – 12.7 40.9 – – 15.88 49.87 19.05 58.31
25 1 33.4 4.55 3.29 – – – – – – – – 6.35 4.3 9.09 5.53
32 11/4 24.2 4.85 4.53 – – – – – – – – 6.35 5.69 9.7 7.88
450 18 457.2 12.7 141.35 23.8 258.29 29.36 314.54 34.93 369.34 39.67 414.74 45.24 466.67 – –
500 2C 508 12.7 157.51 26.19 315.97 32.54 387.41 38.1 448.3 44.45 515.94 49.99 573.31 – –
15 1/2 21.3 3.73 1.64 – – – – – – – – 4.75 1.97 7.47 2.59

AISI 304 ERW Pipe Testings

  • Ultrasonic Testing (UT)
  • Radiographic Testing (RT)
  • Magnetic Particle Testing (MT)
  • Dye Penetrant Testing (PT)
  • Visual Inspection
  • Eddy Current Testing (ET)

Stainless Steel 304 Pipe HSN Code

Product HSN Code
SS Pipe 304 73044900

SS 304 ERW Pipe Chemical Composition

Element % Present
Silicon (Si) 1.00
Manganese (Mn) 2.00
Phosphorous (P) 0.045
Carbon (C) 0.07
Chromium (Cr) 17.50 – 19.50
Sulphur (S) 0.015b)
Iron (Fe) Balance
Nickel (Ni) 8.00 – 10.50
Nitrogen (N) 0.10

304 SS Welded Pipe Mechanical Properties

Grade 304
Rockwell B (HR B) max 92
Yield Strength 0.2% Proof (MPa) min 205
Elongation (% in 50mm) min 40
Tensile Strength (MPa) min 515
Hardness Brinell (HB) max 201

SUS 304 Square Pipe Physical Properties

Grade Electrical Resistivity (n.m) Elastic Modulus (g.p.a) Specific Heat 0-1000C (J/kg.k) Density (Kg/M3) Thermal Conductivity (W/m.K) Mean Coefficient of Thermal Expansion (m/m/0C)
5000C 1000C 0-1000C 0-5380C 0-3150C
304 720 193 500 8000 21.5 16.2 17.2 18.4 17.8

Stainless Steel 304 Rectangular Pipe Equivalent Material

STANDARD AFNOR UNS JIS WERKSTOFF NR. EN BS GOST
SS 304 Z7CN18-09 S30400 SUS 304 1.4301 X5CrNi18-10 304S31 08X18H10

Stainless Steel Pipe Delivery Time As Per Country

Variation in Price
Extra 5 %
Export to Shipping Time in Days
Croatia 60
Switzerland 45-60
Albania 45
Portugal 45
Belgium 45
Hungary 45
Germany 60
Czech Republic 45
Slovakia 45-60
Austria 60
Singapore 8
Malaysia 7
Netherlands 60
Slovenia 60
Finland 45-60
Indonesia 7

ganpat industrial corporation

6 Reasons to choose Ganpat Industrial Corporation

  1. Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
  2. Stockholder and importer of Ferrous and non ferrous metals.
  3. Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
  4. Marine grade steel at lowest price in Mumbai.
  5. Compare Price per KG in India and China.
  6. Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA

Stainless Steel Pipes

All Pipes

Other Products