SS 317 Threaded Forged Fittings

SS 317 Threaded Forged Fittings 2019-04-15T06:54:09+00:00

317 Stainless Steel Forged Threaded 90deg. Elbow, SS 317 Threaded Fittings, Stainless Steel 317 Threaded Fitting, SS 317 Threaded Pipe Elbow, SS UNS S31700 Threaded Bushing, Stainless Steel 317 Threaded Cap, SS 317 Screwed Fittings Supplier in Mumbai, India.

SS WERKSTOFF NR. 1.4449 Threaded Cross, Stainless Steel 317 Threaded Forged Fittings, SS 317 Hex Plug, ASTM A182 Stainless Steel 317 Threaded Elbow, SS 317 Threaded Plug, Stainless Steel 317 Hexagonal Plug, 317 SS Full Couplings Exporter in India.

SS 317 Threaded Forged Fittings

Ganpat Industrial Corporation is one of the prominent trading house and dealer of high quality Stainless Steel 317 Forged Threaded Fittings, which is the basic stainless steel. Like most non – stainless steels, our Stainless Steel 317 Forged Threaded Elbow can be hardened by a “quench-and-temper” heat treatment. These Stainless Steel 317 Forged Threaded Tee contains a minimum of 11.5 percent chromium, just sufficient to give corrosion resistance properties. Our Stainless Steel 317 Forged Threaded Cross achieves maximum corrosion resistance when it has been hardened and tempered and then polished. These Stainless Steel 317 Forged Threaded Cap is a general purpose grade often supplied in the hardened, but still machinable condition, for applications where high strength and moderate heat and corrosion resistance are required. Our Stainless Steel 317 Forged Threaded fittings are optimised for high hardness, and other properties are to some degree compromised. Fabrication of these Stainless Steel 317 Forged Threaded Coupling must be by methods that allow for poor weldability and usually the need for a final heat treatment. Corrosion resistance of our Stainless Steel 317 Forged Threaded Union is lower than that of the common austenitic grades. Useful operating temperature range of these Stainless Steel 317 Forged Threaded Bushing is limited by their loss of ductility at sub – zero temperatures and loss of strength by over – tempering at elevated temperatures.

Stainless Steel 317 Threaded Union Dealer, Stainless Steel 317 High Pressure Forged Fittings, ANSI B16.11 SS 317 Threaded Street Elbows, SS 317 Lateral Tee, ASME SA182M SS 317 Class 6000 Threaded Fittings, 317 SS Pipe Nipple Stockholder.

SS 317 Forged Threaded Fittings

Stainless Steel 317 Threaded Forged Fittings
317 Stainless Steel 45 deg Threaded Elbow
Stainless Steel 317 Threaded Tee
SS 317 Threaded Cross
SS 317 Threaded Cap
Stainless Steel 317 45 degree Threaded Elbow

Stainless Steel 317 Forged Threaded Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socketweld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

 

Types of SS 317 Threaded Forged Fittings

SS 317 Threaded Elbow Stainless Steel 317 Threaded Elbow SS 317 45 Degree Threaded Elbow
317 SS 90 Degree Forged Threaded Elbow
317 Stainless Steel 45 Degree Forged Elbow
SS UNS S31700 45 Degree Forged Elbow
SS WERKSTOFF NR. 1.4449 45 Degree Elbow
ASME SA182 317 90 Degree Forged Threaded Elbow
Stainless Steel 317 Threaded Tee Stainless Steel 317 Threaded Tee SS 317 Threaded Tee
317 SS Forged Tee
317 Stainless Steel Forged Threaded Tee
SS UNS S31700 Threaded Tee
SS WERKSTOFF NR. 1.4449 Forged Tee
ASTM A182 Stainless Steel 317 Threaded Tee
SS 317 Threaded Cross Stainless Steel 317 Threaded Cross SS 317 Threaded Cross
317 SS Forged Threaded Cross
317 Stainless Steel Threaded Cross
SS UNS S31700 Forged Threaded Cross
SS WERKSTOFF NR. 1.4449 Threaded Cross
ASTM A182 317 Stainless Steel Threaded Cross
SS 317 Threaded Cap Stainless Steel 317 Threaded Cap SS 317 Threaded Cap
317 SS Forged Threaded Cap
317 Stainless Steel Threaded Cap
SS UNS S31700 Forged Threaded Cap
SS WERKSTOFF NR. 1.4449 Threaded Cap
ASME SA182 317 Stainless Steel Forged Threaded Cap
SS 317 Threaded Coupling Stainless Steel 317 Threaded Coupling SS 317 Threaded Coupling
317 SS Threaded Coupling
Stainless Steel 317 Threaded Coupling
SS UNS S31700 Threaded Coupling
SS WERKSTOFF NR. 1.4449 Threaded Coupling
ASME 16.11 317 Stainless Steel Threaded Coupling
SS 317 Threaded Union Stainless Steel 317 Threaded Union SS 317 Threaded Union
317 SS Forged Threaded Union
317 Stainless Steel Threaded Union
SS UNS S31700 Forged Union
SS WERKSTOFF NR. 1.4449 Threaded Union
MSS SP-79 317 Stainless Steel Forged Union
SS 317 Threaded Bushing Stainless Steel 317 Threaded Bushing SS 317 Threaded Bushing
317 SS Forged Threaded Bushing
317 Stainless Steel Threaded Bushing
SS UNS S31700 Forged Bushing
SS WERKSTOFF NR. 1.4449 Threaded Bushing
ASTM A182 317 Stainless Steel Threaded Bushing
SS 317 Threaded Plug Stainless Steel 317 Threaded Plug SS 317 Forged Threaded Plug
317 SS Threaded Plug
317 Stainless Steel Forged Plug
SS UNS S31700 Threaded Plug
SS WERKSTOFF NR. 1.4449 Threaded Plug
ASTM A182 TP 317 Stainless Steel Threaded Plug
SS 317 Threaded Hex Plug Stainless Steel 317 Threaded Hex Plug SS 317 Hex Plug
317 SS Forged Hex Plug
317 Stainless Steel Threaded Hex Plug
SS UNS S31700 Hex Plug
SS WERKSTOFF NR. 1.4449 Forged Hex Plug
ASTM A182 317 Stainless Steel Threaded Hex Plug
SS 317 Hexagonal Plug Stainless Steel 317 Hexagonal Plug SS 317 Hexagonal Plug
317 SS Forged Hexagonal Plug
317 Stainless Steel Hexagonal Plug
SS UNS S31700 Forged Hexagonal Plug
SS WERKSTOFF NR. 1.4449 Hexagonal Plug
ASME SA182 317 Stainless Steel Forged Hexagonal Plug
SS 317 Threaded Pipe Nipple Stainless Steel 317 Threaded Pipe Nipple SS 317 Threaded Pipe Nipple
317 SS Forged Pipe Nipple
317 Stainless Steel Threaded Pipe Nipple
SS UNS S31700 Forged Pipe Nipple
SS WERKSTOFF NR. 1.4449 Threaded Pipe Nipple
ASME 16.11 317 Stainless Steel Threaded Pipe Nipple

 

SS 317 Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 317 0.08 max 2 max 1.00 max 0.045 max 0.030 max 18 – 20 3.00 – 4.00 11.00 – 15.00 57.845 min

Stainless Steel 317 Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317 Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317 1.4449 S31700 SUS 317 3304S11

Stainless Steel 317 Forged Threaded Fittings Price List

  • SS 317 Forged Fittings
    FOB Price: USD $1-600 / Piece
  • Stainless Steel 317 Threaded Fitting
    FOB Price: USD $1-600 / Piece
  • 317 Stainless Steel Forged Threaded Fittings
    FOB Price: USD $1-600 / Piece
  • ASTM A182 317 stainless steel Forged Fitting
    FOB Price: USD $1-600 / Piece
  • SS 317 Threaded Fittings
    FOB Price: USD $1-600 / Piece

Stainless Steel 317 Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 317 Forged Threaded Fittings Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME  SS 317 Threaded Fitting Value Added Services

Material Testing:
We at Ganpat Industrial Corporation ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 317 Forged Fittings Packaging

SS 317 Forged Fittings Packaging 317 SS Threaded Fittings Packaging We focus on every procedure to assure quality, the package we usually take is pack SS 317 Threaded Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your 317 Stainless Steel Forged Threaded Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The Stainless Steel 317 Threaded Fittings are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps.

SS 317 Forged Threaded Fitting Manufacturer Popular Searches

ss 317 forged steel fittings, ss 317 class 3000 fittings pressure rating, 150# stainless steel 317 threaded fittings, b16.11 pressure rating, ansi 3000 pressure rating, class 9000 fittings pressure rating, class 300 fittings pressure rating, 317 ss class 3000 pipe fittings pressure rating, asme b16.11 class 3000, class 6000 fittings, ss 317 pipe coupling dimensions, steel pipe fitting dimensions chart, stainless steel 317 threaded fittings, ss 317 forged fittings price list, ss 317 forged fittings price, asme b16.11 fittings, 317 threaded fittings dimensions pdf, ss 317 threaded forged fittings dimensions,317 ss forged fittings definition, 3000 lb stainless steel forged fittings, 317 ss forged fittings definition

Stainless Steel 317 Forged Fittings Supplier

Perth, Noida, Hyderabad, Nagpur, Colombo, Dammam, Madrid, Kuala Lumpur, Bogota, Montreal, Karachi, Nashik, Coimbatore, Aberdeen, Ahvaz, Baroda, Lagos, Al Khobar, Santiago, Seoul, Ludhiana, Kuwait City, Milan, Jeddah, Brisbane, Algiers, La Victoria, Ranchi, Singapore, Howrah, Cairo, Bengaluru, Houston, Ho Chi Minh City, Toronto, Dubai, Indore, Atyrau, Hong Kong, Surat, Port-of-Spain, Ernakulam, Calgary, Mexico City, Edmonton, Chennai, Los Angeles, Visakhapatnam, Busan, Istanbul, Bangkok, Rajkot, Vadodara, Chiyoda, Ankara, Jamshedpur, Gimhae-si, Haryana, Caracas, Geoje-si, Petaling Jaya, Pimpri-Chinchwad, Thane, Gurgaon, Abu Dhabi, Kanpur, London, Thiruvananthapuram, Melbourne, Vung Tau, Doha, Ahmedabad, Dallas, Jakarta, Pune, Bhopal, Chandigarh, Manama, New York, Secunderabad, Navi Mumbai, Riyadh, Muscat, Ulsan, Mumbai, Kolkata, Lahore, Granada, Sharjah, Courbevoie, Al Jubail, Sydney, Jaipur, Tehran, Hanoi, Moscow, New Delhi, Rio de Janeiro, Faridabad.

Stainless Steel 317 Threaded Fittings Exporter

Ghana, Poland, Peru, Vietnam, Switzerland, Trinidad & Tobago,Tunisia, Libya, United Kingdom, Thailand, Bulgaria, Belarus, Portugal, China, Ecuador, Nepal, Hong Kong, Kuwait, Gabon, Morocco, Egypt, Chile, Ukraine, Mongolia, Oman, Bhutan, Denmark, Macau, United Arab Emirates, France, Spain, Sweden, Costa Rica, Czech Republic, Austria, Canada, India, Turkey, Finland, Ireland, Australia, Serbia, Mexico, South Africa, Croatia, Colombia, Netherlands, Israel, Russia, Sri Lanka, Kenya, Namibia, Gambia, Philippines, Zimbabwe, Estonia, Bangladesh, Germany, Brazil, Jordan, Hungary, United States, Slovakia, Azerbaijan, Indonesia, Pakistan, Japan, Venezuela, Taiwan, Saudi Arabia, Iran, Iraq, Mexico, Romania, Iran, Bolivia, Qatar, Algeria, Poland, Greece, Malaysia, Tibet, Puerto Rico, Kazakhstan, New Zealand, Singapore, Belgium, Yemen, Italy, Afghanistan, Norway, Lebanon, Argentina, Chile, Nigeria, South Korea, Nigeria, Lithuania, Angola, Bahrain.