SS 347H Threaded Forged Fittings

SS 347H Threaded Forged Fittings 2019-04-15T10:38:39+00:00

Stainless Steel 347H Threaded Fitting, SS 347H Threaded Pipe Elbow, 347H Stainless Steel Forged Threaded 90deg. Elbow, SS 347H Threaded Fittings, SS UNS S34709 Threaded Bushing, Stainless Steel 347H Threaded Cap, SS 347H Screwed Fittings Supplier in Mumbai, India.

ASTM A182 Stainless Steel 347H Threaded Elbow, SS 347H Threaded Plug, SS 347H Hex Plug, SS 347H Lateral Tee, Stainless Steel 347H Threaded Forged Fittings, SS WERKSTOFF NR. 1.4961 Threaded Cross, 347H SS Full Couplings Exporter in India.

SS 347H Threaded Forged Fittings

Ganpat Industrial Corporation is one of the prominent exporting houses of Stainless Steel 347H Forged Threaded Fittings, which has high corrosion resistance in chloride containing media, including seawater. Our Stainless Steel 347H Forged Threaded Elbow is a machinability – improved version and is well suited for use in, for example, organic acids. These Stainless Steel 347H Forged Threaded Tee offers excellent and consistent machining properties for increased cutting speeds, reduced tool wear and set – up times. Our Stainless Steel 347H Forged Threaded Cross is exposed for prolonged periods to temperatures exceeding 300 Degree C (570 Degree F). The microstructure of these Stainless Steel 347H Forged Threaded Cap changes which results in a reduction in impact strength, where this effect does not necessarily affect the behaviour of the material at the operating temperature. Our Stainless Steel 347H Forged Threaded Fittings has a far lower coefficient of thermal expansion than austenitic alloys and can therefore possess certain design advantages. In terms of resistance to general corrosion, these Stainless Steel 347H Forged Threaded Coupling is comparable or superior alloys in most media. Compared to our Stainless Steel 347H Forged Threaded Union, which does not contain molybdenum, it is clearly far superior. These Stainless Steel 347H Forged Threaded Bushing is confirmed by potential measurements of the critical temperature for the initiation of pitting corrosion (CPT) performed in chloride – bearing aqueous solutions.

Stainless Steel 347H High Pressure Forged Fittings, ASME SA182M SS 347H Class 6000 Threaded Fittings, ANSI B16.11 SS 347H Threaded Street Elbows, Stainless Steel 347H Hexagonal Plug, Stainless Steel 347H Threaded Union Dealer, 347H SS Pipe Nipple Stockholder.

SS 347H Forged Threaded Fittings

Stainless Steel 347H Threaded Forged Fittings
347H Stainless Steel 45 deg Threaded Elbow
Stainless Steel 347H Threaded Tee
SS 347H Threaded Cross
SS 347H Threaded Cap
Stainless Steel 347H 45 degree Threaded Elbow

Stainless Steel 347H Forged Threaded Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socketweld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

 

Types of SS 347H Threaded Forged Fittings

SS 347H Threaded Elbow Stainless Steel 347H Threaded Elbow SS 347H 45 Degree Threaded Elbow
347H SS 90 Degree Forged Threaded Elbow
347H Stainless Steel 45 Degree Forged Elbow
SS UNS S34709 45 Degree Forged Elbow
SS WERKSTOFF NR. 1.4961 45 Degree Elbow
ASME SA182 347H 90 Degree Forged Threaded Elbow
Stainless Steel 347H Threaded Tee Stainless Steel 347H Threaded Tee SS 347H Threaded Tee
347H SS Forged Tee
347H Stainless Steel Forged Threaded Tee
SS UNS S34709 Threaded Tee
SS WERKSTOFF NR. 1.4961 Forged Tee
ASTM A182 Stainless Steel 347H Threaded Tee
SS 347H Threaded Cross Stainless Steel 347H Threaded Cross SS 347H Threaded Cross
347H SS Forged Threaded Cross
347H Stainless Steel Threaded Cross
SS UNS S34709 Forged Threaded Cross
SS WERKSTOFF NR. 1.4961 Threaded Cross
ASTM A182 347H Stainless Steel Threaded Cross
SS 347H Threaded Cap Stainless Steel 347H Threaded Cap SS 347H Threaded Cap
347H SS Forged Threaded Cap
347H Stainless Steel Threaded Cap
SS UNS S34709 Forged Threaded Cap
SS WERKSTOFF NR. 1.4961 Threaded Cap
ASME SA182 347H Stainless Steel Forged Threaded Cap
SS 347H Threaded Coupling Stainless Steel 347H Threaded Coupling SS 347H Threaded Coupling
347H SS Threaded Coupling
Stainless Steel 347H Threaded Coupling
SS UNS S34709 Threaded Coupling
SS WERKSTOFF NR. 1.4961 Threaded Coupling
ASME 16.11 347H Stainless Steel Threaded Coupling
SS 347H Threaded Union Stainless Steel 347H Threaded Union SS 347H Threaded Union
347H SS Forged Threaded Union
347H Stainless Steel Threaded Union
SS UNS S34709 Forged Union
SS WERKSTOFF NR. 1.4961 Threaded Union
MSS SP-79 347H Stainless Steel Forged Union
SS 347H Threaded Bushing Stainless Steel 347H Threaded Bushing SS 347H Threaded Bushing
347H SS Forged Threaded Bushing
347H Stainless Steel Threaded Bushing
SS UNS S34709 Forged Bushing
SS WERKSTOFF NR. 1.4961 Threaded Bushing
ASTM A182 347H Stainless Steel Threaded Bushing
SS 347H Threaded Plug Stainless Steel 347H Threaded Plug SS 347H Forged Threaded Plug
347H SS Threaded Plug
347H Stainless Steel Forged Plug
SS UNS S34709 Threaded Plug
SS WERKSTOFF NR. 1.4961 Threaded Plug
ASTM A182 TP 347H Stainless Steel Threaded Plug
SS 347H Threaded Hex Plug Stainless Steel 347H Threaded Hex Plug SS 347H Hex Plug
347H SS Forged Hex Plug
347H Stainless Steel Threaded Hex Plug
SS UNS S34709 Hex Plug
SS WERKSTOFF NR. 1.4961 Forged Hex Plug
ASTM A182 347H Stainless Steel Threaded Hex Plug
SS 347H Hexagonal Plug Stainless Steel 347H Hexagonal Plug SS 347H Hexagonal Plug
347H SS Forged Hexagonal Plug
347H Stainless Steel Hexagonal Plug
SS UNS S34709 Forged Hexagonal Plug
SS WERKSTOFF NR. 1.4961 Hexagonal Plug
ASME SA182 347H Stainless Steel Forged Hexagonal Plug
SS 347H Threaded Pipe Nipple Stainless Steel 347H Threaded Pipe Nipple SS 347H Threaded Pipe Nipple
347H SS Forged Pipe Nipple
347H Stainless Steel Threaded Pipe Nipple
SS UNS S34709 Forged Pipe Nipple
SS WERKSTOFF NR. 1.4961 Threaded Pipe Nipple
ASME 16.11 347H Stainless Steel Threaded Pipe Nipple

 

SS 347H Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Cb Ni Fe
SS 347H 0.10 max 2 max 1.00 max 0.045 max 0.030 max 17.00 – 19.00 8xC – 1.10 9.00 – 13.00 63.72 min

Stainless Steel 347H Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 347H Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 347H 1.4961 S34709 SUS 347H X6CrNiNb18-12


Stainless Steel 347H Forged Threaded Fittings Price List

  • SS 347H Forged Fittings
    FOB Price: USD $100-6000 / Ton
  • Stainless Steel 347H Threaded Fitting
    FOB Price: USD $100-6000 / Ton
  • 347H Stainless Steel Forged Threaded Fittings
    FOB Price: USD $100-6000 / Ton
  • ASTM A182 347H stainless steel Forged Fitting
    FOB Price: USD $100-6000 / Ton
  • SS 347H Threaded Fittings
    FOB Price: USD $100-6000 / Ton

Stainless Steel 347H Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 347H Forged Threaded Fittings Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME  SS 347H Threaded Fitting Value Added Services

Material Testing:
We at Ganpat Industrial Corporation ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 347H Forged Fittings Packaging

SS 347H Forged Fittings Packaging 347H SS Threaded Fittings Packaging We focus on every procedure to assure quality, the package we usually take is pack SS 347H Threaded Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your 347H Stainless Steel Forged Threaded Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The Stainless Steel 347H Threaded Fittings are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps.

SS 347H Forged Threaded Fitting Manufacturer Popular Searches

347H ss class 3000 pipe fittings pressure rating, asme b16.11 class 3000, class 6000 fittings, ss 347H pipe coupling dimensions, steel pipe fitting dimensions chart, stainless steel 347H threaded fittings, ss 347H forged fittings price list, ss 347H forged fittings price, asme b16.11 fittings, 347H threaded fittings dimensions pdf, ss 347H threaded forged fittings dimensions, 347H ss forged fittings definition, 3000 lb stainless steel forged fittings, 347H ss forged fittings definition, ss 347H forged steel fittings, ss 347H class 3000 fittings pressure rating, 150# stainless steel 347H threaded fittings, b16.11 pressure rating, ansi 3000 pressure rating, class 9000 fittings pressure rating, class 300 fittings pressure rating

Stainless Steel 347H Forged Fittings Supplier

Jamshedpur, Algiers, Granada, Mumbai, Rajkot, Pimpri-Chinchwad, Ranchi, Noida, Moscow, Gurgaon, Hanoi, Dammam, Kuwait City, Al Jubail, Pune, Ulsan, Sharjah, Ahvaz, Rio de Janeiro, Haryana, Milan, Dallas, Atyrau, Edmonton, Istanbul, Madrid, Santiago, Doha, Baroda, Sydney, Faridabad, Gimhae-si, Bogota, La Victoria, Kolkata, Seoul, Bengaluru, Nagpur, Dubai, Jaipur, Mexico City, New Delhi, Melbourne, Vadodara, Cairo, Brisbane, Kuala Lumpur, Muscat, Chiyoda, Montreal, Abu Dhabi, Bhopal, Caracas, Indore, Los Angeles, Coimbatore, Bangkok, Ahmedabad, Nashik, Ho Chi Minh City, Thane, Houston, Geoje-si, Vung Tau, Surat, Thiruvananthapuram, New York, Courbevoie, Perth, Ludhiana, Singapore, London, Hong Kong, Riyadh, Secunderabad, Ankara, Calgary, Al Khobar, Jeddah, Chandigarh, Toronto, Busan, Manama, Petaling Jaya, Colombo, Hyderabad, Kanpur, Karachi, Lagos, Visakhapatnam, Jakarta, Tehran, Lahore, Navi Mumbai, Aberdeen, Port-of-Spain, Ernakulam, Chennai, Howrah.

Stainless Steel 347H Threaded Fittings Exporter

Poland, Algeria, South Korea, Colombia, Gambia, Vietnam, Pakistan, Romania, Estonia, Philippines, Lithuania, Nigeria, United States, Singapore, Ireland, Namibia, Greece, Israel, Indonesia, Hong Kong, Trinidad & Tobago,Tunisia, Canada, Chile, Switzerland, Lebanon, Belgium, Finland, Croatia, Libya, Netherlands, Zimbabwe, New Zealand, United Arab Emirates, Brazil, Sweden, Costa Rica, Morocco, China, Yemen, France, Mexico, Sri Lanka, Serbia, Tibet, Norway, Bahrain, Egypt, Ukraine, Germany, United Kingdom, Argentina, Japan, Nigeria, Bangladesh, Chile, India, Kazakhstan, Afghanistan, Bulgaria, Gabon, Ecuador, Iraq, Taiwan, Hungary, Macau, Mongolia, Poland, Azerbaijan, Spain, Peru, South Africa, Russia, Qatar, Portugal, Mexico, Kuwait, Slovakia, Kenya, Czech Republic, Malaysia, Bhutan, Iran, Denmark, Nepal, Iran, Turkey, Venezuela, Puerto Rico, Thailand, Angola, Italy, Jordan, Saudi Arabia, Oman, Australia, Austria, Belarus, Ghana, Bolivia.