SS 446 Threaded Forged Fittings

SS 446 Threaded Forged Fittings 2019-04-15T09:46:34+00:00

Stainless Steel 446 Threaded Fitting, 446 Stainless Steel Forged Threaded 90deg. Elbow, SS UNS S44600 Threaded Bushing, SS 446 Threaded Fittings, SS 446 Threaded Pipe Elbow, Stainless Steel 446 Threaded Cap, SS 446 Screwed Fittings Supplier in Mumbai, India.

SS WERKSTOFF NR. 1.4762 / 1.4763 Threaded Cross, Stainless Steel 446 Threaded Forged Fittings, SS 446 Hex Plug, ASTM A182 Stainless Steel 446 Threaded Elbow, SS 446 Threaded Plug, 446 SS Full Couplings Exporter in India.

SS 446 Threaded Forged Fittings

Ganpat Industrial Corporation is one of the pioneer trader and dealer of Stainless Steel 446 Forged Threaded Fittings, which is commonly used for various fasteners and pins that require strength and resistance to galling. Because of its high – hardness capability, Stainless Steel 446 Forged Threaded Elbow is seldom welded, because the additions of 4 % silicon and 8 % manganese inhibit wear, galling, and fretting. However, if welding is necessary, the parts of Stainless Steel 446 Forged Threaded Tee should be preheated and maintained at about 500 Degree F, welded, and then immediately given a 6 hour – 8 hour anneal at 1350 Degree F / 1400 Degree F with a slow furnace cool. The parts of Stainless Steel 446 Forged Threaded Cross should not be allowed to cool below 500 Degree F between welding and annealing, where high welding heat inputs should be used. To obtain mechanical properties of Stainless Steel 446 Forged Threaded Cap in the weld similar to those in the base metal, welding consumables of like composition should be considered. In cutlery applications, grinding and polishing are very important, where Stainless Steel 446 Forged Threaded Fittings works well in these operations. Do not overheat while grinding Stainless Steel 446 Forged Threaded Coupling, since both the hardness and corrosion resistance may be lowered. Typical applications of Stainless Steel 446 Forged Threaded Union are large airframe structural components and injection moulding equipment.

ANSI B16.11 SS 446 Threaded Street Elbows, Stainless Steel 446 Threaded Union Dealer, SS 446 Lateral Tee, Stainless Steel 446 High Pressure Forged Fittings, Stainless Steel 446 Hexagonal Plug, ASME SA182M SS 446 Class 6000 Threaded Fittings, 446 SS Pipe Nipple Stockholder.

SS 446 Forged Threaded Fittings

Stainless Steel 446 Threaded Forged Fittings
446 Stainless Steel 45 deg Threaded Elbow
Stainless Steel 446 Threaded Tee
SS 446 Threaded Cross
SS 446  Threaded Cap
Stainless Steel 446 45 degree Threaded Elbow

Stainless Steel 446 Forged Threaded Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socketweld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

 

Types of SS 446 Threaded Forged Fittings

SS 446 Threaded Elbow Stainless Steel 446 Threaded Elbow SS 446 45 Degree Threaded Elbow
446 SS 90 Degree Forged Threaded Elbow
446 Stainless Steel 45 Degree Forged Elbow
SS UNS S44600 45 Degree Forged Elbow
SS WERKSTOFF NR. 1.4762 45 Degree Elbow
ASME SA182 446 90 Degree Forged Threaded Elbow
Stainless Steel 446 Threaded Tee Stainless Steel 446 Threaded Tee SS 446 Threaded Tee
446 SS Forged Tee
446 Stainless Steel Forged Threaded Tee
SS UNS S44600 Threaded Tee
SS WERKSTOFF NR. 1.4763 Forged Tee
ASTM A182 Stainless Steel 446 Threaded Tee
SS 446 Threaded Cross Stainless Steel 446 Threaded Cross SS 446 Threaded Cross
446 SS Forged Threaded Cross
446 Stainless Steel Threaded Cross
SS UNS S44600 Forged Threaded Cross
SS WERKSTOFF NR. 1.4762 Threaded Cross
ASTM A182 446 Stainless Steel Threaded Cross
SS 446 Threaded Cap Stainless Steel 446 Threaded Cap SS 446 Threaded Cap
446 SS Forged Threaded Cap
446 Stainless Steel Threaded Cap
SS UNS S44600 Forged Threaded Cap
SS WERKSTOFF NR. 1.4763 Threaded Cap
ASME SA182 446 Stainless Steel Forged Threaded Cap
SS 446 Threaded Coupling Stainless Steel 446 Threaded Coupling SS 446 Threaded Coupling
446 SS Threaded Coupling
Stainless Steel 446 Threaded Coupling
SS UNS S44600 Threaded Coupling
SS WERKSTOFF NR. 1.4762 Threaded Coupling
ASME 16.11 446 Stainless Steel Threaded Coupling
SS 446 Threaded Union Stainless Steel 446 Threaded Union SS 446 Threaded Union
446 SS Forged Threaded Union
446 Stainless Steel Threaded Union
SS UNS S44600 Forged Union
SS WERKSTOFF NR. 1.4763 Threaded Union
MSS SP-79 446 Stainless Steel Forged Union
SS 446 Threaded Bushing Stainless Steel 446 Threaded Bushing SS 446 Threaded Bushing
446 SS Forged Threaded Bushing
446 Stainless Steel Threaded Bushing
SS UNS S44600 Forged Bushing
SS WERKSTOFF NR. 1.4762 Threaded Bushing
ASTM A182 446 Stainless Steel Threaded Bushing
SS 446 Threaded Plug Stainless Steel 446 Threaded Plug SS 446 Forged Threaded Plug
446 SS Threaded Plug
446 Stainless Steel Forged Plug
SS UNS S44600 Threaded Plug
SS WERKSTOFF NR. 1.4763 Threaded Plug
ASTM A182 TP 446 Stainless Steel Threaded Plug
SS 446 Threaded Hex Plug Stainless Steel 446 Threaded Hex Plug SS 446 Hex Plug
446 SS Forged Hex Plug
446 Stainless Steel Threaded Hex Plug
SS UNS S44600 Hex Plug
SS WERKSTOFF NR. 1.4762 Forged Hex Plug
ASTM A182 446 Stainless Steel Threaded Hex Plug
SS 446 Hexagonal Plug Stainless Steel 446 Hexagonal Plug SS 446 Hexagonal Plug
446 SS Forged Hexagonal Plug
446 Stainless Steel Hexagonal Plug
SS UNS S44600 Forged Hexagonal Plug
SS WERKSTOFF NR. 1.4763 Hexagonal Plug
ASME SA182 446 Stainless Steel Forged Hexagonal Plug
SS 446 Threaded Pipe Nipple Stainless Steel 446 Threaded Pipe Nipple SS 446 Threaded Pipe Nipple
446 SS Forged Pipe Nipple
446 Stainless Steel Threaded Pipe Nipple
SS UNS S44600 Forged Pipe Nipple
SS WERKSTOFF NR. 1.4762 Threaded Pipe Nipple
ASME 16.11 446 Stainless Steel Threaded Pipe Nipple

 

SS 446 Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 446 0.020 max 1.50 max 0.75 max 0.040 max 0.030 max 23 – 30 0.50 max 0.25 max

Stainless Steel 446 Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.5 g/cm3 1510 °C (2750 °F) Psi – 75000 , MPa – 485 Psi – 40000 , MPa – 275 20 %

Equivalent Grades for 446 Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 446 1.4762 / 1.4763 S44600

Stainless Steel 446 Forged Threaded Fittings Price List

  • SS 446 Forged Fittings
    FOB Price: USD $0.5-1000 / Piece
  • Stainless Steel 446 Threaded Fitting
    FOB Price: USD $0.5-1000 / Piece
  • 446 Stainless Steel Forged Threaded Fittings
    FOB Price: USD $0.5-1000 / Piece
  • ASTM A182 446 stainless steel Forged Fitting
    FOB Price: USD $0.5-1000 / Piece
  • SS 446 Threaded Fittings
    FOB Price: USD $0.5-1000 / Piece

Stainless Steel 446 Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 446 Forged Threaded Fittings Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME  SS 446 Threaded Fitting Value Added Services

Material Testing:
We at Ganpat Industrial Corporation ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 446 Forged Fittings Packaging

SS 446 Forged Fittings Packaging 446 SS Threaded Fittings Packaging We focus on every procedure to assure quality, the package we usually take is pack SS 446 Threaded Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your 446 Stainless Steel Forged Threaded Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The Stainless Steel 446 Threaded Fittings are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps.

SS 446 Forged Threaded Fitting Manufacturer Popular Searches

150# stainless steel 446 threaded fittings, b16.11 pressure rating, ansi 3000 pressure rating, class 9000 fittings pressure rating, class 300 fittings pressure rating, 446 ss class 3000 pipe fittings pressure rating, asme b16.11 class 3000, class 6000 fittings, ss 446 pipe coupling dimensions, steel pipe fitting dimensions chart, stainless steel 446 threaded fittings, ss 446 forged fittings price list, ss 446 forged fittings price, asme b16.11 fittings, 446 threaded fittings dimensions pdf, ss 446 threaded forged fittings dimensions, 446 ss forged fittings definition, 3000 lb stainless steel forged fittings, 446 ss forged fittings definition, ss 446 forged steel fittings, ss 446 class 3000 fittings pressure rating

Stainless Steel 446 Forged Fittings Supplier

Jeddah, Haryana, Bogota, Al Jubail, Noida, Perth, Jakarta, Sharjah, Busan, Hanoi, Calgary, Faridabad, Ahmedabad, Mumbai, Nagpur, Abu Dhabi, Vung Tau, Visakhapatnam, Algiers, Gurgaon, New Delhi, Doha, Chandigarh, Melbourne, Toronto, Montreal, Hyderabad, Madrid, Hong Kong, Jaipur, Los Angeles, Dubai, Brisbane, Karachi, Geoje-si, Rio de Janeiro, Gimhae-si, Pimpri-Chinchwad, Bengaluru, Bhopal, Cairo, Seoul, Indore, Baroda, Ernakulam, Muscat, Lagos, Jamshedpur, Courbevoie, La Victoria, Kuala Lumpur, Edmonton, Vadodara, Singapore, New York, Dammam, Chiyoda, Moscow, Colombo, Houston, Granada, Kanpur, Kuwait City, Riyadh, Chennai, Ranchi, Aberdeen, Milan, Secunderabad, Tehran, London, Santiago, Dallas, Ahvaz, Ulsan, Petaling Jaya, Mexico City, Istanbul, Pune, Navi Mumbai, Coimbatore, Bangkok, Lahore, Kolkata, Rajkot, Thane, Caracas, Ludhiana, Surat, Al Khobar, Ankara, Manama, Thiruvananthapuram, Port-of-Spain, Sydney, Nashik, Howrah, Atyrau, Ho Chi Minh City.

Stainless Steel 446 Threaded Fittings Exporter

Canada, Chile, Mongolia, South Africa, Brazil, Qatar, Iran, Finland, Ireland, Portugal, United Arab Emirates, Namibia, Bolivia, China, Yemen, Switzerland, Lebanon, Bhutan, Singapore, Costa Rica, Poland, Afghanistan, Iraq, France, Bangladesh, Peru, Philippines, Netherlands, Japan, Trinidad & Tobago,Tunisia, Ghana, Macau, Nigeria, Venezuela, Pakistan, Kenya, Sweden, Greece, Angola, Hungary, Bahrain, Nepal, Serbia, Ukraine, Belgium, Belarus, Czech Republic, Bulgaria, Denmark, Vietnam, Nigeria, Ecuador, United Kingdom, Romania, Azerbaijan, Algeria, Iran, Kazakhstan, Lithuania, Slovakia, New Zealand, Taiwan, Mexico, Morocco, Israel, Egypt, Chile, Malaysia, Indonesia, United States, Hong Kong, Jordan, Gabon, Saudi Arabia, Zimbabwe, South Korea, Estonia, Libya, Thailand, Oman, Mexico, India, Germany, Kuwait, Spain, Sri Lanka, Norway, Puerto Rico, Australia, Turkey, Tibet, Colombia, Gambia, Russia, Poland, Austria, Croatia, Argentina, Italy.