Beyond Borders, Beyond Standards: What Makes Ganpat Industrial a Global Choice for ASTM A815 UNS S32750 Pipe Fittings ?
Fastest Turnaround
Ready stock sizes cleared and containerised within the same week
PREN ≥ 40 Guaranteed
Ferrite balance and pitting resistance checked before dispatch
Genuine UNS S32750 Heat
Every forging traceable to a certified super duplex heat number
Offshore-Grade Documentation
MTC 3.1, NACE MR0175 & PMI reports on every consignment
Elbow To Pipe Bend, One PO
Every buttweld fitting type stocked and shipped together
ASTM A815 UNS S32750 Pipe Fittings Technicalities
- 1Fitting Types: Elbow, Tee, Reducer, Cap, Stub End, Collar, Cross, Pipe Bend
- 2PREN Value: ≥ 40 • Chloride pitting resistant design
- 3Governing Spec: ASTM A815 / ASME SA815 UNS S32750, UNS S32760
- 4End Finish: Bevelled, Plain & Seamless / Welded construction
- 5Size Range: 1/2″ NB to 48″ NB • SCH 10S to SCH XXS
- 6Dimension Standard: ASME B16.9, MSS SP-43, ASME B16.28
Or call our Mumbai office: +91 22 6743 7134 • Bulk export enquiries answered same day
Ganpat Industrial manufactures ASTM A815 UNS S32750 Pipe Fittings using certified super duplex raw material sourced and tested to strict mill specifications, built specifically for environments where standard austenitic grades fail high-chloride seawater lines, offshore risers, and acid-heavy process piping in refineries and desalination units. The dual-phase austenite-ferrite structure gives these fittings roughly twice the mechanical strength of conventional 316L stainless, allowing engineers to specify lighter-wall components while still meeting demanding pressure-temperature ratings. Backed by 25+ years of experience in high-alloy piping manufacturing, Ganpat Industrial Corporation operates out of Mumbai and exports these pipe fittings on a weekly basis to buyers across the Gulf, African, European and American markets, with complete heat-to-fitting traceability supplied on every shipment.
Mumbai · Trusted ASME SA815 S32750 / S32760 Fittings Manufacturer · Size 1/2″ To 48″ Or Custom
ASTM A815 UNS S32750 Pipe Fittings Built For Pipelines Where Failure Isn’t An Option
When corrosion eats through 316L and even standard duplex falls short, engineering firms turn to ASTM A815 UNS S32750 Pipe Fittings. Ganpat Industrial manufactures and exports the complete range – from Elbows to Pipe Bends – for offshore, subsea and high-chloride process applications in 40+ countries worldwide.
- ✓ISO 9001:2015
- ✓ISO 14001:2015
- ✓PED 2014/68/EU
- ✓NACE MR0175 / MR0103
- ✓Petrofac & Aramco Approved Vendor
Trusted ASME SA815 S32760 Fittings Manufacturer in India With Size 1/2 to 48″ or Custom
Specification Of ASTM A815 UNS S32750 Pipe Fittings
ASME SA815 UNS S32760 Elbow Nominal Range
- 1/2″ NB to 48″ NB
- SCH 10S to SCH XXS
- Seamless & welded construction
- Custom bore on drawing
SA815 UNS S32760 Tee Grade Designation
- ASTM A815 Gr S32750
- ASTM A815 Gr S32760
- SA815 UNS S32750 / S32760
- W. Nr. 1.4410 / 1.4501
ASTM A815 UNS S32750 Reducer Dimensional Standard
- ASME B16.9 (Butt-Weld Fittings)
- ASME B16.28 (Short Radius)
- MSS SP-43 (Light Wall)
- ISO 3419 for metric drawings
SA815 S32760 Cross End Preparation
- Bevelled Ends (30° per ASME B16.25)
- Plain / Square Cut
- Threaded on request
- Socket weld on request
A815 S32760 Stub End Corrosion Testing
- ASTM G48 Method A (Pitting)
- PREN ≥ 40 verification
- Ferrite Content 40–60%
- Intergranular Corrosion Test
ASME SA815 S32760 Pipe Bend Manufacturing Process
- Hot Forging
- Seamless Pipe Extrusion
- Fabrication From Plate
- Solution Annealed & Quenched
A815 S32760 Tee Certification
- Mill Test Certificate 3.1
- NACE MR0175 Compliance
- Radiography Report (RT)
- Certificate Of Origin
SA815 UNS S32760 Reducer Surface Condition
- Pickled & Passivated
- Shot Blasted
- Black / As Forged
- Bright Machined on request
ASME SA815 S32760 Collar Supply Origin
- Indian Origin Forgings
- European Origin Billets
- Full Heat Traceability
- Duplicate MTC On Request
ASME SA815 UNS S32760 Elbow Size Chart
| Nominal Diameter | O.D. Or I.D. Diameter | Equivalent Decimal | Typical Threads In Inch |
|---|---|---|---|
| 1/16″ | 5/16 | 0.313 | 27 |
| 1/8″ | 13/32 | 0.405 | 27 |
| 1/4″ | 35/64 | 0.540 | 18 |
| 3/8″ | 43/64 | 0.675 | 18 |
| 1/2″ | 27/32 | 0.840 | 14 |
| 3/4″ | 1-3/64 | 1.050 | 14 |
| 1″ | 1-5/16 | 1.315 | 11-1/2 |
| 1-1/4″ | 1-21/32 | 1.660 | 11-1/2 |
| 1-1/2″ | 1-29/32 | 1.900 | 11-1/2 |
| 2″ | 2-3/8 | 2.375 | 11-1/2 |
| 2-1/2″ | 2-7/8 | 2.875 | 8 |
| 3″ | 3-1/2 | 3.500 | 8 |
| 3-1/2″ | 4 | 4.000 | 8 |
| 4″ | 4-1/2 | 4.500 | 8 |
Find Ready Stock Of ASTM A815 Gr S32750 Elbow and Reducer Most Ideal For Desalination Plants
Applications Of ASME SA815 S32760 Pipe Bends
Marine & Shipbuilding Piping
Desalination & Seawater Intake
Flue Gas Desulphurisation
Offshore & Subsea Platforms
Heat Exchanger Tube Lines
Reverse Osmosis & Brine Line Piping
Oil & Gas Process Lines
Pulp & Paper Bleaching Lines
Various Types Of SA815 UNS S32760 Pipe Fittings
ASTM A815 S32750 Elbow
90° / 45° LR & SR
A815 UNS S32750 Tee
Equal & Reducing
ASME SA815 UNS S32750 Reducer
Conc. & Eccentric
SA815 UNS S32750 Pipe Cap
ASME B16.9
ASTM A815 UNS S32750 Stub End
MSS SP-43
SA815 S32750 Lap Joint Stub End
With Backing Flange
ASME SA815 S32750 Cross
4-Way Junction
ASTM A815 Gr S32750 Pipe Bend
3D / 5D Induction
Looking For A Custom Fitting?Share your drawing and get a factory-direct quote in 24 hours.
Schedule Chart Of SA815 UNS S32760 Tee
Schedule XXS
14.3 mm
Subsea & wellhead piping
Schedule 40S
7.1 mm
Standard process piping
Schedule 10S
3.4 mm
Low-pressure utility lines
Schedule 80S / XS
10.9 mm
High-pressure & injection lines
ASTM A815 UNS S32750 Reducer Vs ASTM A815 UNS S32760 Reducer
ASTM A815 UNS S32750 Reducer
- Molybdenum Content: 3.0 – 5.0%
- Tensile Strength: ≥ 795 MPa
- Yield Strength: ≥ 550 MPa
- Fits most offshore, chemical & desalination jobs
ASTM A815 UNS S32760 Reducer
- Molybdenum Content: 3.0 – 4.0% + W & Cu Added
- Tensile Strength: ≥ 795 MPa
- Yield Strength: ≥ 550 MPa
- Better fit for subsea, sour-gas & high-chloride service
Weight Chart Of A815 S32760 Stub End
| Nom. Pipe Size | 90° Elbow | 45° Elbow | 180° Return (LR) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Long Radius | Short Radius | Long Radius | 3R | STD | XS | |||||
| STD | XS | SCH 160 | XXS | STD | XS | STD | XS | STD | XS | |
| 10″ | 88.0 | 107 | 260 | – | 58.0 | 70.0 | 43.0 | 53.0 | 117 | 215 |
| ½″ | .18 | .25 | – | – | – | – | .09 | .19 | .35 | – |
| 18″ | 260 | 340 | – | – | 167 | 219 | 126 | 167 | 510 | 690 |
| 3″ | 5.00 | 6.50 | 8.50 | 11.0 | 3.00 | 4.25 | 2.63 | 3.50 | 10.25 | 13.00 |
| 24″ | 460 | 600 | – | – | 298 | 392 | 238 | 300 | 890 | 1200 |
| 1¼″ | .60 | .90 | 1.00 | 1.38 | .40 | – | 0.38 | .50 | 1.25 | 1.75 |
| 6″ | 24.5 | 35.0 | 57.0 | 65.0 | 18.0 | 23.0 | 12.0 | 17.5 | 50.0 | 70.0 |
| 36″ | 1062 | 1412 | – | – | – | – | 531 | 706 | – | – |
| ¾″ | .19 | .25 | – | – | – | – | .09 | .19 | .40 | .65 |
| 14″ | 160 | 205 | 572 | – | 105 | 140 | 80.0 | 100 | 325 | 400 |
| 2″ | 1.60 | 2.20 | 3.25 | 3.50 | 1.00 | 1.50 | .81 | 1.19 | 3.23 | 4.40 |
| 30″ | 734 | 975 | – | – | – | – | 367 | 488 | – | – |
| 1″ | .40 | .50 | .60 | .75 | .25 | – | 0.25 | .31 | .75 | 1.00 |
| 20″ | 320 | 420 | – | – | 210 | 275 | 160 | 206 | 640 | 830 |
| 4″ | 9.00 | 13.5 | 18.0 | 20.0 | 6.25 | 8.50 | 4.50 | 6.10 | 18.5 | 25.0 |
| 16″ | 206 | 276 | – | – | 132 | 174 | 100 | 135 | 412 | 550 |
| 1½″ | .90 | 1.15 | 1.80 | 1.50 | .56 | .75 | .40 | .69 | 1.88 | 2.39 |
| 8″ | 50.0 | 71.0 | 120 | 118 | 34.0 | 47.5 | 23.0 | 35.0 | 95.0 | 142 |
| 26″ | 550 | 729 | – | – | – | – | 275 | 365 | – | – |
| 12″ | 125 | 160 | 450 | – | 80.0 | 104 | 62.0 | 84.0 | 230 | 320 |
| 2½″ | 3.25 | 4.00 | 5.13 | 7.00 | 2.13 | 2.80 | 1.75 | 2.13 | 6.50 | 8.00 |
| 5″ | 15.0 | 22.0 | 32.0 | 36.0 | 9.60 | 14.0 | 7.50 | 10.7 | 30.0 | 44.0 |
| 22″ | 394 | 520 | – | – | – | – | 197 | 260 | 787 | 1040 |
| 3½″ | 6.75 | 8.35 | – | 16.0 | 4.50 | 6.00 | 3.50 | 4.50 | 13.00 | 16.75 |
Pressure Rating Chart Of A815 S32760 Pipe Cap
SCH XXS – 6″ NB
≈ 284 Bar
Subsea / Wellhead
SCH 10S – 6″ NB
≈ 68 Bar
Utility Lines
SCH 80S – 6″ NB
≈ 216 Bar
High Pressure
SCH 40S – 6″ NB
≈ 141 Bar
Process Piping
SA815 S32760 Cross HSN Code
GST Rate
18%
Standard rate on alloy steel fittings
Stub End / Cap
7307 29 00
Other fittings, not elsewhere specified
HSN Heading
7307
Tube / pipe fittings of stainless steel
Buttweld Elbow / Tee
7307 23 00
Other tube / pipe fittings, stainless steel
Price List Factors Of ASME SA815 S32760 Pipe Bend
◆NB Size & Schedule (Wall Thickness)
◆Fitting Type & Radius (LR / SR / 3R)
◆Manufacturing Route – Forged / Fabricated / Seamless
◆Grade – S32750 or S32760
◆End Preparation & Surface Finish
◆Testing & Certification – MTC 3.1, PMI, RT, NACE
◆Order Quantity & Delivery Terms (Ex-Works / FOB / CIF)
◆Currency & Destination Import Duty
Get a live A815 S32760 Tee quote today2″–12″ elbows and tees ready in stock, no MOQ penalty for repeat buyers.
A815 S32760 Tee Bending Methods
Rotary Draw Bending
- Fixed-radius die method
- Tight, accurate bends
Hot Induction Bending
- Heat-and-quench process
- Best for 3D / 5D radius
Ram-Type Bending
- Hydraulic ram forming
- Suits utility-grade lines
Mandrel Bending
- Internal support prevents collapse
- Ideal for thin-wall pipe
Roll Bending
- Three-roll curving process
- For large sweeping arcs
Chemical Composition Of ASTM A815 Gr S32760 Elbow
ChromiumCr
24.00–26.00%
NickelNi
6.00–8.00%
MolybdenumMo
3.00–5.00%
NitrogenN
0.24–0.32%
ManganeseMn
≤ 1.20%
SiliconSi
≤ 0.80%
CarbonC
≤ 0.030%
IronFe
Balance
Mechanical Properties Of SA815 UNS S32760 Reducer
Top ASTM A815 UNS S32750 Pipe Fittings Supplier In India offering fittings built for high load-bearing and corrosion-resistant performance.
Hardness
≤ 32 HRC / 310 HB
Wear Resistance
Tensile Strength
≥ 800 MPa
Load Bearing
Elongation (2″)
≥ 15%
Ductility
Yield Strength (0.2%)
≥ 550 MPa
Design Limit
A815 S32750 Lap Joint Stub Ends Equivalent Grades
BS
- BS 3059
- BS EN 10088
EN / DIN
- EN 10088-3
- 1.4410 / 1.4501
- X2CrNiMoN25-7-4
GB
- GB/T 21833
- 022Cr25Ni7Mo4N
ASTM / ASME
- A815 / SA815
- A182 F53 / F55
- A789 / A790 (pipe)
IS
- IS 6911
- Grade UNS S32750
JIS
- SUS 329J4L (Ref.)
- JIS G3468
Test Certificates Of ASME SA815 S32760 Collar
Pitting Corrosion Test Report
Every ASTM A815 UNS S32750 Pipe Fitting heat is corrosion-tested per ASTM G48 Method A, exposing sample coupons to ferric chloride solution to confirm no pitting occurs at the specified critical pitting temperature, verifying the PREN ≥ 40 resistance the grade is certified for.
ASTM A815 UNS S32750 Pipe Fittings Delivered Weekly To The Following Countries
| Export To | Countries | Continent | Shipping Time (Days) | Ports |
|---|---|---|---|---|
| United Kingdom | Europe | 22 | Southampton Port | |
| Saudi Arabia | Asia | 10 | Jeddah Islamic Port | |
| UAE | Asia | 7 | Jebel Ali Port |
Monthly Delivery Of ASTM A815 UNS S32750 Pipe Fittings To Below Countries
| Export To | Countries | Continent | Shipping Time (Days) | Ports |
|---|---|---|---|---|
| Nigeria | Africa | 28 | Lagos Port | |
| Australia | Oceania | 26 | Port Of Melbourne | |
| Brazil | South America | 32 | Santos Port |
Testing Methods Of ASTM A815 S32750 Pipe Cap
Quality-Focused ASTM A815 UNS S32750 Pipe Fittings Supplier In India offering fully tested and PMI verified fittings for critical piping projects.
Third-Party Inspection
TPI (SGS / BV / TUV) available on request for export orders
Dimensional Check
OD, centre-to-end & wall thickness verified against ASME B16.9
Radiography (RT)
Weld and forging soundness checked per ASME Sec. V
PMI Testing
Positive Material Identification on every lot to confirm S32750 / S32760 grade
Ferrite Content Test
Confirms 35–65% ferrite balance for optimum toughness
Pitting Corrosion Test
ASTM G48 Method A verification of chloride resistance
Documentation Of SA815 UNS S32760 Cross
Commercial Invoice
PO-matched invoice with HSN & GST breakup
Every Order
Certificate Of Origin
For customs clearance & import duty processing
Export Orders
NABL Lab Report
Independent chemistry, mechanical & pitting test results
On Request
Packing List
Itemised piece count, weight & carton breakup
Every Order
ASME SA815 S32750 Lap Joint Stub Ends Packaging
Trusted ASTM A815 UNS S32750 Pipe Fittings Manufacturer In India delivering export-grade protective packaging for every shipment.
Custom Tagging
PO number, heat number & size stencilled per buyer requirement
VCI / Vacuum Wrap
Moisture & corrosion-inhibiting wrap for long-transit sea freight
End Cap Protection
Plastic end caps on bevelled ends to guard against damage in transit
Wooden Pallet Box
Fumigated wooden crates for bulk quantities & container-load shipments
Sourcing For A Bulk Project?Send us your BOQ for a factory quote, MTC 3.1 included, dispatched the same week.
Frequently Asked Questions
What is the minimum order quantity?
No fixed MOQ — trial lots to full container loads supplied.
Is S32750 the same as SAF 2507?
Yes. SAF 2507 is just the trade name for UNS S32750.
Can ASTM A815 UNS S32750 Pipe Fittings be used in sour service?
Yes, when tested to NACE MR0175 / MR0103 for H2S environments.
What is the difference between ASTM A815 and A182 for duplex fittings?
A815 covers buttweld fittings; A182 covers forged flanges & fittings. Same S32750 chemistry.
See Where You Can Find Material Ex Stock
| Rotterdam (Netherlands) | Singapore |
| Dammam (Saudi Arabia) | Abu Dhabi (UAE) |
| Texas (USA) | California (USA) |
| Al Jubail (Saudi Arabia) | Dubai (UAE) |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA