Get premium Super Duplex 2507 Forged Fittings from Ganpat Industrial.
PREN ≥ 40 Heats
Mill-certified UNS S32750 & S32760 billets, fully traceable to heat number
One Enquiry, Full Range
Elbow • Tee • Coupling • Union • Reducer • Plug — single PO
Sour-Service Ready
ISO 9001 • PED • NACE MR0175 / ISO 15156 heats on request
PMI & Ferrite Verified
Ferrite balance, PMI and ASTM G48 pitting checks before every dispatch
Quote In 24 Hours
Class 3000/6000/9000 stock sizes — ships the same week
Super Duplex 2507 Forged Fittings Overview
- 1Type: Threaded Elbow, Forged Tee, Pipe Coupling, Forged Reducer, Forged Union, Forged Plug, Branch Fitting
- 2Size Range: 1/8″ to 4″ NB • DN6 to DN100 • per ASME B16.11
- 3Common Grades: UNS S32750 (F53), UNS S32760 (F55), WNR 1.4410, Alloy 2507
- 4Pressure Class: 2000# • 3000# • 6000# • 9000#
- 5Standards: ASTM A182 F53/F55, ASME SA182, ASME B16.11, MSS SP-79/83/95/97
- 6Origin: Indian origin • European origin • Japanese origin
Or call our Mumbai office: +91 22 6743 7134 • Same-week dispatch on ready stock sizes
Mumbai · Super Duplex 2507 Forged Fittings Manufacturer & Exporter
SAF 2507 Forged Fittings Built For Subsea, Sour Gas And Chloride-Heavy Piping Lines
Ganpat Industrial forges and supplies UNS S32750 / UNS S32760 / WNR 1.4410 Forged Fittings for buyers running offshore platforms, desalination trains, chemical process skids and marine piping across India, the UAE and the wider Middle East.
- ✓ISO 9001:2015
- ✓ISO 14001:2015
- ✓PED 2014/68/EU
- ✓NACE MR0175 / ISO 15156
- ✓NORSOK M-650
ASTM A182 UNS S32750 Threaded Elbow Manufacturer in India With Pressure Class 2000 to 6000 LBS
Super Duplex 2507 Forged Fittings Specification
2507 Duplex Fitting Material Grade
- UNS S32750 (F53)
- UNS S32760 (F55)
- ASTM A182 / ASME SA182
- WNR 1.4410
Alloy 2507 Fitting Testing
- PMI Testing
- Ferrite Content Test
- Pitting Test (ASTM G48)
- Third-Party Inspection
SAF 2507 Forged Fittings Origin
- Indian Origin
- European Origin
- Japanese Origin
- Heat-Number Traceable
UNS S32750 Fitting Size Range
- NB: 1/8″ – 4″
- DN: DN6 – DN100
- Class: 2000# to 9000#
- Custom sizes on drawing
ASTM A182 F53 Documentation
- Mill Test Certificate 3.1
- NABL Lab Report
- Packing List
- Certificate Of Origin
WNR 1.4410 Fitting Surface Finish
- Pickled & Passivated
- Bright Machined
- Natural Forged Finish
- Passivated (ASTM A967)
Super Duplex Forged Fittings Pressure Rating
Maximum Non-Shock Working Pressure At Ambient Temperature
Class 2000#
2000 PSI
≈ 137 Bar • matches Sch 40 / STD bore
Class 3000#
3000 PSI
≈ 206 Bar • matches Sch 80 / XS bore
Class 6000#
6000 PSI
≈ 413 Bar • matches Sch 160 bore
Class 9000#
9000 PSI
≈ 620 Bar • matches Sch XXS bore
Supply ASME SA182 UNS S32760 Socket Weld Union and Tee Online With Custom Packaging At Fair Price
Super Duplex 2507 Forged Fittings Price List
HSN Heading
7307
Tube or pipe fittings of iron / steel
Threaded Elbow / Tee
7307 92 90
Threaded, of stainless steel
Socket Weld Fitting
7307 22 00
Sleeves & other threaded/socket fittings
GST Rate
18%
Standard rate on duplex steel fittings
No MOQ On Trial OrdersSmall trial lots to full container loads — same factory price basis, MTC 3.1 included.
UNS S32750 Threaded Fittings Size Chart
UNS S32750 Threaded Fittings Size Chart Supplier in India
| NPS | Min Thread Length (B) | Thread Engagement (J) | Outside Dia (D) | Min Wall Thk (G) | Center-End 90° (A) | Center-End 45° (C) |
|---|---|---|---|---|---|---|
| 1/2″ | 10.9 | 13.6 | 38 | 4.09 | 33 | 25 |
| 3/4″ | 12.7 | 13.9 | 46 | 4.32 | 38 | 28 |
| 1″ | 14.7 | 17.3 | 56 | 4.98 | 44 | 33 |
| 1.1/4″ | 17.0 | 18.0 | 62 | 5.28 | 51 | 35 |
| 1.1/2″ | 17.8 | 18.4 | 75 | 5.56 | 60 | 43 |
| 2″ | 19.0 | 19.2 | 84 | 7.14 | 64 | 44 |
| 2.1/2″ | 23.6 | 28.9 | 102 | 7.65 | 83 | 52 |
| 3″ | 25.9 | 30.5 | 121 | 8.84 | 95 | 64 |
| 4″ | 27.7 | 33.0 | 152 | 11.18 | 114 | 79 |
Need A Custom Size Or Reducing Fitting On Drawing?Share your isometric or spec — get a factory-price quote within 24 hours.
Types Of Incoloy 800 Forged Fittings
ASTM B564 UNS N08800 Threaded Fittings
NPT / BSP
WNR 1.4876 Socket Weld Fittings
Class 3000/6000
Nickel Alloy 800 Screwed Fittings
ASME B16.11
Incoloy 800 Threaded Elbow
90° / 45°
Nickel 800 Branch Fitting
Outlet Type
UNS N08800 Forged Elbow
Socket Weld
Incoloy 800 Forged Tee
Equal & Reducing
Incoloy 800 Pipe Coupling
Full & Half
Alloy 800 Forged Reducer
Concentric
ASTM B564 UNS N08800 Forged Union
MSS SP-83
WNR 1.4876 Threaded Pipe Fittings
ASME B1.20.1
Alloy 800 Forged Plug
Round / Hex Head
Alloy 2507 Forged Elbow Weight Chart
Class 3000 Threaded 90° Elbow — Approx Kg Per Piece
| NPS | DN | Class | Approx Weight (Kg/Pc) |
|---|---|---|---|
| 1/2″ | DN15 | 3000# | 0.09 |
| 3/4″ | DN20 | 3000# | 0.14 |
| 1″ | DN25 | 3000# | 0.23 |
| 1.1/4″ | DN32 | 3000# | 0.34 |
| 1.1/2″ | DN40 | 3000# | 0.45 |
| 2″ | DN50 | 3000# | 0.68 |
| 2.1/2″ | DN65 | 3000# | 1.30 |
| 3″ | DN80 | 3000# | 1.95 |
| 4″ | DN100 | 3000# | 3.50 |
Application Of ASTM A182 F53 Forged Fittings
Application Of ASTM A182 F53 Forged Fittings Supplier in India
Subsea Oil & Gas Pipelines
Offshore Platforms & Christmas Trees
Seawater Desalination & RO Plants
Chemical & Fertilizer Plants
Marine & Shipbuilding Piping
Flue Gas Desulfurization (FGD)
Pulp & Paper Bleaching Lines
Firewater & Utility Skids
Sizing A Sour-Service Or Subsea Fitting?Tell us the H₂S / CO₂ duty — we recommend grade, class & testing.
WNR 1.4410 Forged Fittings Schedule Chart
| Fitting Class | Matching Pipe Schedule | Wall Thickness (NPS 2″) | Typical Duty |
|---|---|---|---|
| 2000# | SCH 40 (STD) | 3.91 mm | General duplex process piping |
| 3000# | SCH 80 (XS) | 5.54 mm | Standard oil & gas duplex lines |
| 6000# | SCH 160 | 8.74 mm | High-pressure sour-service lines |
| 9000# | SCH XXS | 11.07 mm | Extreme-pressure wellhead piping |
ASTM A182 UNS S32750 Chemical Composition
Weight % Per ASTM A182 / ASME SA182 Grade F53
Chromium (Cr)
24.00–26.00%
Nickel (Ni)
6.00–8.00%
Molybdenum (Mo)
3.00–5.00%
Nitrogen (N)
0.24–0.32%
Manganese (Mn)
≤ 1.20%
Silicon (Si)
≤ 0.80%
Copper (Cu)
≤ 0.50%
Carbon (C)
≤ 0.030%
Phosphorus (P)
≤ 0.035%
Sulphur (S)
≤ 0.020%
Iron (Fe)
Balance
ASME SA182 UNS S32750 Mechanical Properties
Solution-Annealed Condition
Tensile Strength
≥ 800 MPa
Load Bearing
Yield Strength (0.2%)
≥ 550 MPa
Design Limit
Elongation (50mm)
≥ 15%
Ductility
Hardness
≤ 310 HBW / 32 HRC
Wear Resistance
Impact Energy (-46°C)
≥ 40 J
Low-Temp Toughness
PREN (Pitting Index)
40–43
Chloride Resistance
2507 Duplex Forged Fittings Material Equivalent Chart
ASTM / ASME
- A182 F53 / SA182 F53
- A182 F55 / SA182 F55
- A479 • A995
EN / DIN (Werkstoff Nr.)
- 1.4410 • X2CrNiMoN25-7-4
- 1.4501 • X2CrNiMoCuWN25-7-4
- EN 10222-5
NORSOK
- NORSOK M-650
- MDS D51–D58
- Qualified Manufacturer Route
BS
- BS EN 10222-5
- 1.4410 / 1.4501 Grade
- BS 3799 Fitting Form
API
- API 6A Material Class DD/EE/FF
- API 5CT Coupling Stock (on request)
PED / CE
- PED 2014/68/EU
- Module H / H1 Route
- CE-Marked On Request
Super Duplex 2507 Forged Fittings Test Certificates
Mill Test Certificate 3.1
Every Super Duplex 2507 forged fitting dispatch carries an EN 10204 3.1 Mill Test Certificate, traceable to the original heat and cross-checked against ASTM A182 chemistry and mechanical limits before it leaves the factory floor.
UNS S32750 Forged Fittings Material Testing
UNS S32750 Forged Fittings Material Testing Manufacturer in India
PMI Testing
Positive Material Identification on every lot to confirm chromium & molybdenum content
Ferrite Content Test
Confirms the 50/50 austenite-ferrite phase balance central to duplex performance
Dimensional Check
Bore, thread engagement & wall thickness verified against drawing tolerance
Hardness Test
Confirms solution-annealed condition meets ASTM A182 limits
Pitting Test (ASTM G48)
Verified resistance to pitting & crevice attack in chloride media
Third-Party Inspection
TPI available on request for large export orders
Buying In Bulk For A Project?Send your BOQ — factory price, MTC 3.1, dispatch same week.
Super Duplex 2507 Forged Fittings Documentation
NABL Lab Report
Independent chemistry & mechanical test results
On Request
Packing List
Itemised piece count, weight & carton breakup
Every Order
Certificate Of Origin
For customs clearance & import duty processing
Export Orders
Commercial Invoice
PO-matched invoice with HSN & GST breakup
Every Order
Super Duplex 2507 Forged Fittings Export Packaging
Poly Bag & Carton
Standard retail-ready packing for small trial orders
Wooden Pallet / Crate
For bulk fitting quantities and mixed-size pallets
VCI / Vacuum Wrap
Moisture-sealed protection for long-transit sea freight
Custom PO Labelling
Heat number & PO reference marked per buyer requirement
Super Duplex 2507 Forged Fittings Delivered Weekly To These Countries
| Export To | Country | Continent | Port | Typical Transit |
|---|---|---|---|---|
 |
UAE | Asia | Jebel Ali | 5 days |
 |
Saudi Arabia | Asia | Jubail / Dammam | 7 days |
 |
Singapore | Asia | Port of Singapore | 9 days |
Monthly Delivery Of Super Duplex 2507 Forged Fittings To Below Countries
| Export To | Country | Continent | Port | Typical Transit |
|---|---|---|---|---|
 |
Netherlands | Europe | Rotterdam | 22 days |
 |
USA | North America | Houston | 28 days |
Frequently Asked Questions
Is a Super Duplex 2507 fitting magnetic?
Slightly. Its duplex (austenite + ferrite) structure gives it mild magnetic response, unlike fully austenitic 316L.
What is the difference between F53 and F55?
UNS S32760 (F55) carries added copper and tungsten over UNS S32750 (F53) for marginally higher resistance in specific seawater duties; both meet PREN ≥ 40.
Can these fittings handle sour (H₂S) service?
Yes, when supplied and heat-treated to NACE MR0175 / ISO 15156 requirements — specify this at enquiry stage.
What is the minimum order quantity?
Ganpat Industrial supplies from small trial lots to full container loads; share size, class and quantity for a factory price.
What is the standard lead time?
Ready-stock sizes ship the same week; drawing-specific or large-tonnage orders typically take 3–5 weeks depending on class and quantity.
Discover Our Ready Inventory In These Countries
| UAE | Saudi Arabia | Qatar | Oman | Kuwait |
|---|---|---|---|---|
| Nigeria | Egypt | South Africa | Kenya | Algeria |
| USA | Netherlands | Singapore | Malaysia | Indonesia |
| Brazil | Australia | Iraq | Bahrain | – |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA