What You Get When You Order Titanium Grade 2 Forged Fittings From Ganpat Industrial
Dedicated Ti Cell
Separate forging and tooling line – zero iron pick-up
Full R50400 Range
Elbow • Tee • Coupling • Union on one PO
NACE MR0175 Ready
Sour-service and PED heats released on request
100% PMI Verified
Every piece alloy-checked before it is boxed
Quote In 24 Hours
Ready stock 1/8″-2″ – ships the same week
Titanium Grade 2 Forged Fittings Overview
- 1Type: Forged Elbow, Threaded Elbow, Forged Tee, Pipe Coupling, Forged Reducer, Forged Union, Forged Plug, Branch Fitting
- 2Size Range: NPS 1/8″ to 4″ • DN 6 to DN 100 • per ASME B16.11
- 3Grade Codes: UNS R50400, WNR 3.7035, ASTM B381 Gr F-2, ASME SB-381
- 4Class: Threaded 2000 / 3000 / 6000 • Socket Weld 3000 / 6000 / 9000
- 5Ends: NPT to ASME B1.20.1, BSP, BSPT, Socket Weld, Combination Ends
- 6Origin: Indian origin • European origin • Japanese origin • heat traceable
Or call our Mumbai desk: +91 22 6743 7134 • Same-week dispatch on ready stock classes
Titanium Grade 2 fittings prevent hot chloride pitting in harsh environments. Their protective surface film heals instantly to outlast steel in seawater. Low density reduces component weight by forty three percent for easy transport. Ganpat Industrial forges UNS R50400 fittings to strict ASME standards. Specialized argon machining protects sealing faces from any surface contamination. We are a trusted Mumbai manufacturer with twenty five years experience. Our team exports stock directly across India UAE and Middle East.
Mumbai · Titanium Grade 2 Forged Fittings Manufacturer India
Titanium Grade 2 Forged Fittings That Hold Where Chlorides Eat Stainless Steel Joints Alive
Ganpat Industrial forges and exports UNS R50400 / WNR 3.7035 Forged Fittings for desalination trains, chlor-alkali cells, offshore risers and PTA plants across India, the UAE and the Middle East.
- ✓ISO 9001:2015
- ✓ISO 14001:2015
- ✓OHSAS 18001:2007
- ✓PED Certified
- ✓Petrofac Approved
Titanium Grade 2 Forged Fittings Specification
Everything A Buyer Confirms Before Releasing The PO
Grade 2 Titanium Forged Fitting Material
- UNS R50400
- WNR 3.7035
- ASTM B381 Gr F-2
- ASME SB-381
Titanium Gr 2 Socket Weld Fitting Standard
- ASME B16.11
- MSS SP-79 / SP-83 / SP-95
- BS 3799
- ASTM B363 (weld ends)
CP Gr 2 Titanium Threaded Fitting Size
- NPS 1/8″ – 4″
- DN 6 – DN 100
- Socket weld: 1/8″ – 4″
- Larger sizes on drawing
Ti Metal Gr 2 Forged Elbow Class
- Threaded: 2000 / 3000 / 6000
- Socket Weld: 3000 / 6000 / 9000
- Plugs and bushings: no class
- Combination ends: lower class rules
UNS R50400 Forged Tee End Connection
- NPT to ASME B1.20.1
- BSP / BSPT parallel and taper
- Socket weld bore
- Threaded one end / both ends
WNR 3.7035 Pipe Coupling Production Route
- Open-die / closed-die forging
- CNC turning and boring
- Vacuum or argon annealing
- Alpha-case removal by pickling
Ti Grade 2 Forged Reducer Documentation
- EN 10204 3.1 Mill Test Certificate
- NABL lab and PMI report
- Packing list with heat number
- Certificate of Origin
CP 2 Ti Forged Plug Surface Finish
- Pickled and descaled
- Bright machined
- Grit blasted (iron-free media)
- Passivated per ASTM A967
Titanium Alloy Gr 2 Branch Fitting Service Limit
- Design ceiling 315°C / 600°F
- Non-magnetic, austenite-free
- NACE MR0175 acceptable
- Avoid dry red-fuming HNO₃
Looking To Match A Custom Titanium Fitting Print? Send the sketch – we quote forging, machining and MTC inside 24 hours.
WNR 3.7035 Forged Tee Suitable To Work At Temperature Up To 430°C
ASME Pressure Duty
315 °C
600 °F ceiling for code pressure parts
Continuous Non-Code Duty
up to 430 °C
Strength and oxide film stay serviceable long term
Short Excursion
up to 540 °C
Brief upsets only. Scaling begins beyond this.
Beta Transus
882.5 °C
Alpha structure holds right up to this.
Temperature Ladder For A Titanium Gr 2 Threaded Joint
Ambient – 150 °CFull rating
100%
150 – 260 °CCode OK
Derated
260 – 315 °CCode limit
Ceiling
315 – 430 °CNon-code
Continuous
430 – 540 °CUpset only
Short term
Above 540 °CNot offered
Scaling
Which Ceiling Applies To Your Line?
Non-Code Service – 430 °C
- Vents, drains and low-stress duty
- Rated on mill data, not ASME stress
- Threaded Tee and Forged Reducer both supplied
- No code stamp, no jurisdictional review
- State the design temperature on your PO
ASME Code Service – 315 °C
- B31.3 process piping and BPVC vessels
- Class rated from SB-381 allowable stress
- Pressure derates as metal temperature rises
- Inspector audits against the 600 °F ceiling
- PED and TPI release available on request
Four Things To Confirm Before You Order Hot-Service Fittings
◆Code or non-code line
◆Hydrogen capped at 150 ppm
◆Anti-seize on every hot thread
Grade 2 Titanium Threaded Fittings Size Chart
ASME B16.11 Threaded Fittings Dimensions Supplier in India
| NPS | Centre-to-End (A) – Elbow, Tee, Cross | Band Outside Dia. (H) | Min. Wall (G) | |||||
|---|---|---|---|---|---|---|---|---|
| Cl 2000 | Cl 3000 | Cl 6000 | Cl 2000 | Cl 3000 | Cl 6000 | Cl 3000 | Cl 6000 | |
| 1/8″ | 0.81 | 0.81 | 0.97 | 0.88 | 0.88 | 1.00 | 0.125 | 0.250 |
| 1/4″ | 0.81 | 0.97 | 1.12 | 0.88 | 1.00 | 1.31 | 0.130 | 0.260 |
| 3/8″ | 0.97 | 1.12 | 1.31 | 1.00 | 1.31 | 1.50 | 0.138 | 0.275 |
| 1/2″ | 1.12 | 1.31 | 1.50 | 1.31 | 1.50 | 1.81 | 0.161 | 0.321 |
| 3/4″ | 1.31 | 1.50 | 1.75 | 1.50 | 1.81 | 2.19 | 0.170 | 0.336 |
| 1″ | 1.50 | 1.75 | 2.00 | 1.81 | 2.19 | 2.44 | 0.196 | 0.391 |
| 1-1/4″ | 1.75 | 2.00 | 2.38 | 2.19 | 2.44 | 2.97 | 0.208 | 0.417 |
| 1-1/2″ | 2.00 | 2.38 | 2.50 | 2.44 | 2.97 | 3.31 | 0.219 | 0.436 |
| 2″ | 2.38 | 2.50 | 3.25 | 2.97 | 3.31 | 4.00 | 0.281 | 0.476 |
| 2-1/2″ | 3.00 | 3.25 | 3.75 | 3.62 | 4.00 | 4.75 | 0.301 | 0.602 |
| 3″ | 3.38 | 3.75 | 4.19 | 4.31 | 4.75 | 5.75 | 0.348 | 0.655 |
| 4″ | 4.19 | 4.50 | 4.50 | 5.75 | 6.00 | 6.00 | 0.440 | 0.735 |
Types Of Titanium Alloy Gr 2 Forged Fittings
Mix any thirteen types on one order. One heat, one certificate, one dispatch.
WNR 3.7035 Socket Weld Fittings
Class 3000
Socket weld ends for leak-tight welded pipe joints.
Ti Grade 2 Threaded Elbow
90° / 45°
Changes pipe direction at 90 or 45 degrees.
Titanium Alloy Gr 2 Branch Fitting
Sockolet
Adds a branch outlet to a running pipe line.
CP 2 Ti Forged Tee
Equal / Reducing
Splits or joins flow across three pipe connections.
Ti Metal Gr 2 Pipe Coupling
Full / Half
Joins two straight pipe lengths into one run.
Commercially Pure Ti Grade 2 Forged Reducer
Hex / Flush
Steps pipe size down between two different diameters.
UNS R50400 Forged Union
3-Piece
Lets you disconnect pipework fast without any cutting.
WNR 3.7035 Forged Plug
Hex / Square
Seals an unused pipe opening completely and securely.
UNS R50400 Forged Elbow Weight Chart
The Number That Decides Your Freight Bill
Titanium Gr 24.51 g/cm³
Lightest
Carbon Steel7.85 g/cm³
+74%
SS 316L8.00 g/cm³
+77%
Cupro-Nickel 90/108.94 g/cm³
+98%
| NPS | DN | Ti Gr 2 – 90° Elbow (kg) | Ti Gr 2 – 45° Elbow (kg) | Same Elbow In Steel (kg) | Weight Saved |
|---|---|---|---|---|---|
| 1/2″ | 15 | 0.117 | 0.110 | 0.204 | 43% |
| 3/4″ | 20 | 0.195 | 0.183 | 0.340 | 43% |
| 1″ | 25 | 0.273 | 0.248 | 0.476 | 43% |
| 1-1/4″ | 32 | 0.396 | 0.362 | 0.689 | 43% |
| 1-1/2″ | 40 | 0.542 | 0.438 | 0.943 | 43% |
| 2″ | 50 | 0.878 | 0.772 | 1.529 | 43% |
| 3″ | 80 | 2.888 | 2.228 | 5.026 | 43% |
Application Of CP Gr 2 Titanium Socket Weld Fittings
Chloride Resistant Socket Weld Fittings Supplier in India
Seawater Desalination (MSF and RO)
Chlor-Alkali and Bleach Plants
Offshore Platform and Subsea Lines
Condenser and Heat Exchanger Piping
PTA and Acetic Acid Reactors
Hydrometallurgy Autoclaves
Naval and Shipboard Systems
Pharma and Fine Chemical Skids
Preparing A BOQ For Your Desalination Or Chlor-Alkali Line?Share the line list – factory price, MTC 3.1 and one consolidated dispatch.
Ti Metal Gr 2 Branch Fitting Pressure Rating
Class number is not a fixed psi. ASME B16.11 rates by matched pipe wall. Grade 2 pipe data governs, not steel.
Threaded End
Class 2000
Sch 80 / XS wall • 1/8″-4″
Threaded End
Class 3000
Sch 160 wall • 1/8″-4″
Socket Weld End
Class 6000
Sch 160 wall • 1/8″-2″
Socket Weld End
Class 9000
XXS wall • 1/2″-2″
Which End Preparation Should You Order?
Threaded End
- Classes 2000, 3000, 6000
- No hot work. Safe in live plants.
- Titanium galls. Anti-seize is mandatory.
- Thread root crevice. Avoid stagnant brine.
- Faster to fit, easier to dismantle
Socket Weld End
- Classes 3000, 6000, 9000
- Full-strength, leak-tight joint
- Needs argon purge and trailing shield
- Preferred for hydrocarbon and cyclic duty
- Standard choice for offshore and subsea
What Pulls The Rating Down
◆Corrosion and thread-depth allowance
◆Pipe mill minus tolerance (12.5%)
◆Combination ends take the lower class
Ti Grade 2 Screwed Fittings Schedule Chart
Match your class to its rating schedule. This table stops the commonest ordering error. Small-bore titanium lines suffer it most.
| Class Designation | End Type | Rating Pipe Schedule | Wall Designation | Available NPS |
|---|---|---|---|---|
| 2000 | Threaded | Schedule 80 | XS | 1/8″ – 4″ |
| 3000 | Threaded | Schedule 160 | – | 1/8″ – 4″ |
| 6000 | Threaded | – | XXS | 1/8″ – 4″ |
| 3000 | Socket Weld | Schedule 80 | XS | 1/8″ – 4″ |
| 6000 | Socket Weld | Schedule 160 | – | 1/8″ – 2″ |
| 9000 | Socket Weld | – | XXS | 1/2″ – 2″ |
CP 2 Ti Pipe Coupling Chemical Composition
Per ASTM B381 / ASME SB-381 Grade F-2 – Weight Percent
Titanium (Ti)
Balance
Iron (Fe)
≤ 0.30%
Oxygen (O)
≤ 0.25%
Carbon (C)
≤ 0.08%
Nitrogen (N)
≤ 0.03%
Hydrogen (H)
≤ 0.015%
Residuals – Each
≤ 0.10%
Residuals – Total
≤ 0.40%
Titanium Alloy Gr 2 Forged Reducer Mechanical Properties
Annealed Condition – Cross Section Up To 3 in²
Tensile Strength, min
345 MPa
50 ksi
Yield Strength 0.2%, min
275 MPa
40 ksi
Elongation in 4D, min
20%
Ductility
Reduction Of Area, min
30%
Necking
Density
4.51 g/cm³
0.163 lb/in³
Melting Point
1665 °C
3030 °F
Modulus Of Elasticity
105 GPa
Springback
Max Design Temperature
315 °C
600 °F ceiling
Commercially Pure Ti Grade 2 Threaded Elbow Material Equivalent
Same metal, six certificate languages. Name the standard your inspector audits. We certify to that standard.
ASTM / ASME
- ASTM B381 Gr F-2
- ASME SB-381
- ASTM B348 Grade 2
- UNS R50400
EN / DIN
- W.Nr 3.7035
- Ti2 / Ti-Grade 2
- DIN 17862 / 17864
- EN 10204 3.1 cert
JIS
- JIS Class 2
- JIS H 4600
- JIS H 4630
- TP 340 series
GB
- TA2
- GB/T 3620.1
- GB/T 13810
- GB/T 16598
GOST
- BT1-0 (VT1-0)
- GOST 19807
- GOST 22178
- Sponge route OT4-0
AFNOR / ISO
- AFNOR T40
- ISO Grade 2
- ISO 5832-2
- BS 25-35 t/in²
Titanium Grade 2 Forged Union Price In India
Forged Union Per Kg Pricing Manufacturer in India
Pricing Basis
Per Kg + Machining
Metal weight plus forging, turning and threading cost
Minimum Order
Trial Lot Accepted
From single-piece samples to container quantities
Lead Time
Ready Stock / 3-5 Wks
Stock classes ship same week; forged-to-order 3-5 weeks
HSN Heading
8108
Titanium and articles thereof
The Five Line Items Behind Your Quote
◆Threaded vs socket weld
◆Order quantity per size
◆Test scope and TPI
◆Ti sponge index on order date
Check Live Titanium Grade 2 PricingFactory price against your size and class list. Locked for 15 days. MTC 3.1 included free.
PED Approved UNS R50400 Threaded Fittings At Factory Price With Custom Sizes and Ready Stock
EN 10204 Type 3.1 Mill Test Certificate
Every Titanium Grade 2 Forged Fittings consignment leaves with a 3.1 certificate tied to the original ingot heat, cross-checked against the ASTM B381 Grade F-2 chemistry and tensile limits before the box is sealed. Final-product hydrogen is reported separately, as the specification requires for forgings.
Titanium Grade 2 Forged Fittings Delivered Weekly to the Following Countries
WEEKLY EXPORT SCHEDULE • DIRECT FROM MUMBAI
| Export To | Continent | Port | Shipping Time |
|---|---|---|---|
 Egypt |
Africa | Damietta | 18 Days |
 Qatar |
Asia | Ras Laffan | 7 Days |
 Oman |
Asia | Salalah | 5 Days |
Monthly Delivery of Titanium Grade 2 Forged Fittings to Below Countries
MONTHLY EXPORT SCHEDULE • DIRECT FROM MUMBAI
| Export To | Continent | Port | Shipping Time |
|---|---|---|---|
 Kuwait |
Asia | Shuaiba | 10 Days |
 Netherlands |
Europe | Harlingen | 30 Days |
Titanium Grade 2 Forged Fittings Testing Before Dispatch
PMI Verification
Confirms commercially pure titanium, not a mixed alloy grade
Interstitial Analysis
O, N, H and C measured by inert gas fusion per ASTM E1409 / E1447
Tensile Test
Machined specimens tested to ASTM E8 for strength and elongation
Dimensional Check
Socket bore, depth and thread gauging against B16.11 tolerance
Alpha Case and DP Check
Surface screened for oxygen-rich layer, laps and forging folds
Third-Party Inspection
TUV, BV, SGS or client inspector welcomed on export lots
Grade 2 Titanium Forged Fittings Export Packaging
Individual Poly Sleeve
Iron-free wrap – no steel strapping touches the titanium surface
Thread and Socket Protection
Plastic caps on every machined end so threads arrive gauge-perfect
VCI Carton, Then Fumigated Crate
Moisture-sealed for long sea transit, ISPM-15 stamped timber
PO-Matched Labelling
Heat number, class, NPS and your PO line item printed on each box
Unsure If Grade 2 Or Grade 7 Fits Your Application?Tell us the fluid, temperature and pH – we recommend grade, class and end prep free.
Frequently Asked Questions
Are Grade 2 Titanium Forged Fittings magnetic?
No. Commercially pure titanium is non-magnetic, which suits instrument, naval and MRI-adjacent installations.
Do CP Gr 2 Titanium Threaded Fittings gall on assembly?
Yes, readily. Always use PTFE tape or a nickel-free anti-seize – never make up a titanium thread dry.
What is the maximum design temperature for WNR 3.7035 Socket Weld Fittings?
315°C (600°F). Above that, ASME code rules no longer permit Grade 2 for pressure service.
Can I get a Ti Grade 2 Forged Elbow above NPS 4″?
ASME B16.11 stops at 4″. Larger fittings are forged to your drawing – send the sketch and we quote.
Titanium Alloy Gr 2 or Grade 7 Forged Tee for my line?
Grade 7 adds palladium for reducing acids. For seawater, bleach and neutral chlorides, Grade 2 is the cost-effective choice.
What is the minimum order quantity for a UNS R50400 Forged Union?
None fixed. We supply trial pieces through to full container loads – share size, class and quantity for a factory price.
Call Now for the Clients List Based in Below Locations
| Dubai | Nigeria | Al Jubail | Tanzania | Kenya | Texas |
| Riyadh | Angola | Houston | South Africa | Ghana | Algeria |
| Abu Dhabi | New South Wales | Egypt | Carolina | Oman | Al-khobar |
| Gabon | Mozambique | Tunisia | Saudi Arabia | Zambia | Ethiopia |
| Morocco | Indiana | UAE | USA | California | Dammam |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA