What Makes Ganpat Industrial the Preferred Source for Titanium Grade 5 Pipe Fittings Worldwide ?

Quote In 24 Hours

Standard NB sizes ready to dispatch same week

Direct Ex-Stock Rates

Factory pricing on Grade 5 Titanium – no broker chain

PMI-Checked Every Lot

Alloy confirmed before it ever reaches your site

Full Fitting Range, One PO

Elbow • Tee • Reducer • Stub End – single shipment

Aerospace-Grade Traceability

Heat-traceable ASTM B363 UNS R56400 raw material only

Titanium Grade 5 Pipe Fittings Core Characteristics

  • 1Density: 4.43 g/cm³ – nearly 45% lighter than steel
  • 2Type: Elbow, Tee, Reducer, Cap, Stub End, Collar, Cross, Lap Joint, Bend
  • 3Standard: ASTM B363, ASME SB363, MSS SP-43
  • 4Form: Seamless & Welded, Butt Weld & Socket Weld
  • 5Alloy Designation: UNS R56400, WNR 3.7164 / 3.7165, Ti-6Al-4V
  • 6Size Range: 1/2″ NB to 24″ NB • SCH 5S to 160
Titanium Grade 5 Pipe Fittings
Request Quote
Whatsapp
Call Us

Or call our Mumbai office: +91 22 6743 7134 • Same-week dispatch on ready stock sizes

Every Titanium Grade 5 Pipe Fitting that leaves our facility begins as certified Ti-6Al-4V (UNS R56400) billet, forged and precision-machined to deliver strength comparable to mid-range steel while weighing almost 50% less. What sets this alloy apart is its self-repairing oxide layer – even after a scratch or abrasion, the surface instantly reforms its protective barrier, making it virtually immune to seawater exposure, chloride attack and aggressive process chemicals. This is precisely why offshore platforms, aerospace duct systems, desalination plants and chemical processing units rely on Grade 5 titanium fittings decades after carbon steel or 316 stainless would have already failed. At Ganpat Industrial, our in-house machining covers the complete range – elbows, tees, reducers, stub ends and more – with each batch verified through PMI testing before it ever reaches the packing line. Every consignment ships with an EN 10204 3.1 material certificate as standard. Based in Mumbai, Ganpat Industrial Corporation has spent 25+ years manufacturing and exporting specialty metal components, supplying both ready stock and custom-engineered fittings to clients across India, the UAE, European markets and Southeast Asia.

Mumbai · Titanium Forging & Machining Exporter

Titanium Grade 5 Pipe Fittings Built for Maximum Strength, Minimum Weight

Ganpat Industrial manufactures and supplies Titanium Grade 5 Pipe Fittings engineered for applications where steel simply can’t compete on strength-to-weight ratio – serving desalination facilities, offshore rigs, aerospace duct systems and chemical processing plants throughout India, the UAE and Europe.

  • ✓ISO 9001:2015
  • ✓ISO 14001:2015
  • ✓OHSAS 18001:2007
  • ✓PED Certified
  • ✓AS9100 Traceable Heats

 

Request Your Quote →
See Full Specifications

 

ASTM B363 UNS N56400 Elbow and Tee Manufacturer in India As Per Custom Specification

Specification Of Titanium Grade 5 Pipe Fittings

Leading Titanium Grade 5 Pipe Fittings Manufacturer in India manufacturing strictly to recognized specifications

Grade 5 Titanium Elbow Nominal Bore Range

  • 1/2″ NB to 24″ NB
  • OD: 21.3 – 610 mm
  • SCH 5S to SCH 160
  • Custom bore on drawing

Titanium Grade 5 Tee Governing Standard

  • ASTM B363 / ASME SB363
  • ASME B16.9 (Butt Weld)
  • MSS SP-43 (Light Wall)
  • ASME B16.11 (Socket Weld)

CP Gr 5 Titanium Reducer Manufacturing Route

  • Forged & Machined
  • Seamless & Welded
  • Cold & Hot Formed
  • CNC Finish Machining

Titanium Alloy Gr 5 Pipe Cap Alloy Class

  • Ti-6Al-4V (Alpha-Beta)
  • UNS R56400
  • WNR 3.7164 / 3.7165
  • Density 4.43 g/cm³

ASTM B363 UNS N56400 Stub End Surface Condition

  • Mill / Pickled Finish
  • Bead Blasted
  • Machined Smooth
  • Anodised On Request

WNR 3.7164 Collar Quality Verification

  • PMI Alloy Check
  • Radiography (RT)
  • Dye Penetrant (DPT)
  • Third-Party Inspection

Ti Metal Gr 5 Cross Certification Offered

  • EN 10204 3.1 / 3.2
  • NABL Test Report
  • Certificate Of Origin
  • AS9100 Traceability

CP 5 Ti Lap Joint Stub Ends Export Packing

  • VCI Wrapped Boxes
  • Wooden Pallet Crates
  • Bore Capped & Sealed
  • Custom Heat-No Labelling

Ti Grade 5 Pipe Bend Raw Material Origin

  • US & European Mill Billet
  • Japanese Origin On Request
  • Traceable To Heat Number
  • Sponge-Grade Verified

 

Get Wide Range Of Seamless and Welded WNR 3.7164 Reducer Tested With Ultrasonic and HIC Testing

Testing Methods Of Commercially Pure Ti Grade 5 Tee

Top Titanium Grade 5 Pipe Fittings Supplier in India ensuring every batch undergoes thorough quality testing

Ultrasonic Testing (UT)

Internal flaw detection to check material soundness beneath the surface

Dimensional Check

OD, wall thickness & angle verified against drawing tolerance

PMI Testing

Positive Material Identification on every lot to confirm alloy grade

HIC Testing

Hydrogen-induced cracking resistance per NACE TM0284 (sour-service steel grades)

Hardness Test

Confirms heat treatment condition meets ASTM B363 limits

Radiography (RT)

Weld and body soundness verified on welded fittings

Types Of CP Gr 5 Titanium Pipe Fittings

Top Titanium Grade 5 Pipe Fittings Supplier in India stocking a comprehensive range of fitting types for every project requirement

Grade 5 Titanium Elbow
Grade 5 Titanium Elbow

90° / 45° LR & SR

Titanium Grade 5 Tee
Titanium Grade 5 Tee

Equal & Reducing

CP Gr 5 Titanium Reducer
CP Gr 5 Titanium Reducer

Concentric & Eccentric

Titanium Alloy Gr 5 Pipe Cap
Titanium Alloy Gr 5 Pipe Cap

ASME B16.9

ASTM B363 UNS N56400 Stub End
ASTM B363 UNS N56400 Stub End

MSS SP-43

WNR 3.7164 Collar
WNR 3.7164 Collar

Reinforcing

Ti Metal Gr 5 Cross
Ti Metal Gr 5 Cross

4-Way

Ti Grade 5 Pipe Bend
Ti Grade 5 Pipe Bend

3D / 5D / 6D

Looking For A Custom Titanium Fitting?Send us your drawing and receive a factory-direct quote in under 24 hours.

Get Your Quote →

Titanium Alloy Gr 5 Elbow Size Chart

NB (Inch) Thread Engagement O.D. / I.D. Outer Ø (Equivalent) Threads Size (inches)
1″ 1-5/16 1.315 11-1/2
1/8″ 13/32 0.405 27
1-1/4″ 1-21/32 1.660 11-1/2
1/4″ 35/64 0.540 18
1/16″ 5/16 0.313 27
3/4″ 1-3/64 1.050 14
1/2″ 27/32 0.840 14
3/8″ 43/64 0.675 18

Ti Grade 5 Pipe Bend Schedule Chart

DN Schedule 10S Schedule 40S
Con Reducer Ecc Reducer Reducing Tee Con Reducer Ecc Reducer Reducing Tee
40×20 0.18 0.18 0.58 0.24 0.24 0.74
50×40 0.31 0.31 0.76 0.45 0.45 1.15
32×20 0.18 0.18 0.44 0.22 0.22 0.52
40×32 0.21 0.24 0.61 0.28 0.28 0.77
65×50 0.47 0.47 1.25 0.80 0.80 1.98
80×50 0.55 0.55 1.56 1.00 1.00 2.91
80×40 0.51 0.51 1.52 0.94 0.94 2.85
40×25 0.19 0.19 0.60 0.26 0.26 0.76
50×25 0.28 0.28 0.73 0.40 0.40 1.10
400×300 18.35 18.35 51.71 36.70 36.70 87.54
20×15 0.10 0.10 0.11 0.14 0.14 0.15
50×32 0.30 0.30 0.74 0.44 0.44 1.13
100×40 0.68 0.68 2.90 1.36 1.36 4.53
25×20 0.13 0.13 0.25 0.16 0.16 0.27
65×40 0.44 0.44 1.24 0.76 0.76 1.94
25×15 0.12 0.12 0.25 0.15 0.15 0.26
32×25 0.18 0.18 0.45 0.22 0.22 0.53

Titanium Grade 5 Pipe Fittings vs Titanium Grade 2 Pipe Fittings

Titanium Grade 5 Pipe Fittings
  • Alpha-beta alloy – Al & V added
  • Tensile strength ≥ 895 MPa
  • Higher strength-to-weight ratio
  • Preferred for aerospace & high-load piping
VS
Titanium Grade 2 Pipe Fittings
  • Commercially pure, unalloyed
  • Tensile strength ≥ 345 MPa
  • Superior weldability & formability
  • Preferred for chlor-alkali & desalination

CP 5 Ti Lap Joint Stub Ends Chemical Composition

HydrogenH

≤ 0.015%

TitaniumTi

Balance

VanadiumV

3.50-4.50%

NitrogenN

≤ 0.05%

AluminiumAl

5.50-6.75%

CarbonC

≤ 0.08%

IronFe

≤ 0.40%

OxygenO

≤ 0.20%

Ti Metal Gr 5 Cross Mechanical Properties

Density

4.43 g/cm³

Weight Saving

Elongation

≥ 10%

Ductility

Tensile Strength

≥ 895 MPa

High Load

Yield Strength (0.2%)

≥ 828 MPa

Design Limit

HSN Code Of WNR 3.7164 Collar

GST Rate

18%

Standard rate on titanium articles

Unwrought Titanium

8108 20 90

Raw billet & sponge (input material)

HSN Heading

8108

Titanium & articles thereof

Tube / Pipe Fittings

8108 90 90

Other articles of titanium

ASTM B363 UNS N56400 Stub End Price List Factors

◆Fitting Type
◆Testing & Certification
◆Bore & Wall Schedule
◆Order Quantity
◆End Connection (BW/SW/Threaded)
◆Surface Finish

Request your Titanium Grade 5 Fitting price todayEx-factory rates, in-stock supply on common NB sizes, and no extra charge for small repeat orders.

Get A Quote →

Equivalent Grades Of Titanium Alloy Gr 5 Pipe Cap

BS

  • BS 2TA10 – 2TA13
  • BS EN 3-4

JIS

  • JIS H4600 Class 60
  • JIS H4650
  • Ti-6Al-4V Eq.

ASTM / ASME

  • ASTM B363 (WPT5)
  • ASTM B348 Grade 5
  • UNS R56400
  • AMS 4967 / 4928

GB

  • GB/T 3620.1
  • TC4
  • GB/T 13810

ISO

  • ISO 5832-3
  • ISO 5252

EN / DIN

  • DIN 17851
  • WNR 3.7164 / 3.7165
  • TiAl6V4

Weekly Distribution Of Titanium Grade 5 Pipe Fittings

Export To Continent Port Shipping Time
Italy Europe Port of Genoa 22-36 Days
Netherlands Europe Port of Rotterdam 18-32 Days
France Europe Port of Le Havre 20-35 Days

Monthly Delivery Of ASTM B363 UNS R56400 Elbow And Tee

Monthly Delivery In The Following Countries
Export To Continent Port Shipping Time
Argentina South America Port of Buenos Aires 28-45 Days
South Korea Asia Port of Busan 12-20 Days
Vietnam Asia Port of Ho Chi Minh 10-18 Days

Corrosion Resistance Of CP Gr 5 Titanium Reducer

Sulphuric / Hydrochloric Acid

Limited

Nitric Acid (Oxidising)

Excellent

Hypochlorite / Bleach

Good

Seawater & Brine

Excellent

Alkaline Solutions

Good

Wet Chlorine Gas

Good

Industrial Application Of Titanium Grade 5 Tee

Power Plant Condensers

Aerospace Ducting & Struts

Pharma & Biotech Skids

Sports & Racing Exhaust Lines

Offshore & Marine Piping

Desalination & Seawater RO

Pump & Valve Assemblies

Chemical & Petrochemical Plants

Grade 5 Titanium Elbow Certification

3.2MTC

Mill Test Certificate — EN 10204 3.2

For buyers requiring third-party validation, Ganpat Industrial arranges an EN 10204 3.2 certificate for Titanium Grade 5 (Ti-6Al-4V) elbows, validated by both the manufacturer’s authorized inspector and an independent inspection agency or the buyer’s nominated TPI (Lloyd’s, Bureau Veritas, DNV, SGS, TÜV) prior to dispatch.

Validated ByManufacturer’s Inspector + Independent TPI / Notified Body
StandardEN 10204 3.2
Applies ToTitanium Grade 5 (Ti-6Al-4V) Elbows
IssuedOn request, prior to dispatch

CP 5 Ti Reducer Documentation

Commercial Invoice

PO-matched invoice with HSN & GST breakup

Every Order

Certificate Of Origin

For customs clearance & import duty processing

Export Orders

NABL Lab Report

Independent chemistry & mechanical test results

On Request

Packing List

Itemised piece count, weight & crate breakup

Every Order

Packaging Of Ti Grade 5 Pipe Cap

1
Custom Labelling

PO number, size & heat number marked per buyer requirement

2
Export Vacuum Pack

Moisture-sealed for long-transit sea freight & humid climates

3
Bore Capping & VCI Wrap

End faces protected and corrosion-inhibited for transit

4
Wooden Pallet Crate

For bulk quantities & container-load shipments

Sourcing For A Bulk Project?Share your BOQ and get ex-factory pricing, MTC 3.1, with same-week dispatch.

Get Your Quote →

Frequently Asked Questions

What does “Grade 5” mean in titanium fittings?

Grade 5 refers to Ti-6Al-4V, a titanium alloy strengthened with 6% aluminium and 4% vanadium – the most widely used titanium grade for structural and piping applications.

Are Titanium Grade 5 fittings suitable for high temperatures?

Yes, they perform reliably up to around 400°C, retaining good strength and oxidation resistance within this range.

Do these fittings need special welding procedures?

Yes. Titanium requires argon-shielded TIG welding with full inert gas purging to prevent oxygen contamination of the weld.

How do Titanium Grade 5 fittings compare in cost to stainless steel?

They cost more upfront, but lower weight, longer service life, and reduced maintenance often offset this over the project lifecycle.

What certification comes standard with each order?

Every dispatch includes an EN 10204 3.1 Mill Test Certificate, traceable to the original heat number.

Check Out Your Nearby Locations For Fastest Deliveries

Here Is A List Of Countries Where We Have Regular Deliveries
Netherlands Kenya Vietnam Brazil Qatar
South Africa USA Bahrain Poland Malaysia
Egypt Singapore Saudi Arabia Canada Germany
Chile Nigeria South Korea United Kingdom Kuwait
Indonesia Mexico Belgium Australia UAE

 

Need Titanium Grade 5 Pipe Fittings On Your Drawing?

Manufacturer & Exporter based in Mumbai – serving India, UAE, Europe & Southeast Asia with ready stock and custom sizes.

Send Enquiry Now →

ganpat industrial corporation

6 Reasons to choose Ganpat Industrial Corporation

  1. Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
  2. Stockholder and importer of Ferrous and non ferrous metals.
  3. Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
  4. Marine grade steel at lowest price in Mumbai.
  5. Compare Price per KG in India and China.
  6. Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA