Why Do Engineers & Buyers Trust Ganpat Industrial For Titanium Grade 5 Washers ?
60% Lighter Than Steel
4.43 g/cm³ density cuts joint weight without cutting strength
M6 – M36 Ready Stock
Live bar & sheet inventory punched and quoted within 24 hours
Heat-Traceable Every Lot
ASTM B348 raw material with full mill heat number back-up
Non-Magnetic, Bio-Safe
Approved for MRI rooms, subsea joints and hazardous-zone bolting
One PO, Every Washer Type
Flat, Spring, Star, Lock, Sealing, Tab, Taper & Split shipped together
Titanium Grade 5 Washers Facet
- 1Size Range: M6 to M36 • Custom bore & OD on drawing
- 2Grade Reference: Titanium Gr.5 • Ti6Al4V • UNS R56400 • WNR 3.7165
- 3Origin: India • USA • Germany
- 4Types: Flat, Spring, Star, Lock, Sealing, Tab, Square, Conical, Taper & Split
- 5Finish & Condition: Mill annealed, pickled, laser or precision punched
- 6Standards: ASTM B348, DIN 125, DIN 127, DIN 6796, ASME B18.22.1
Or call our Mumbai office: +91 22 6743 7134 • Same-week dispatch on ready stock sizes
Titanium Grade 5 Washers combine aircraft-grade Ti6Al4V with a fraction of steel’s weight. Ganpat Industrial punches every washer from certified UNS R56400 flat stock. Each piece is deburred, annealed and passivated in-house. The alloy resists seawater, chlorides and most industrial acids without pitting. It stays non-magnetic under any bolt load. That makes it the default choice for offshore skids, aerospace brackets, motorsport chassis and medical fixtures. Ganpat Industrial Corporation has operated from Mumbai for over twenty-five years. We stock, punch and finish specialty alloy fasteners and washers under one roof. Shipments move regularly to the UAE, Europe and the wider Middle East. Every dispatched lot carries dimensional reports and a mill test certificate.
Mumbai · Titanium Fastener & Washer Manufacturer
Titanium Grade 5 Washers
Ganpat Industrial precision-punches Titanium Grade 5 (Ti6Al4V) Washers for engineers who cannot afford joint failure — aerospace brackets, marine shafts, motorsport chassis and offshore bolting where weight, corrosion and strength all matter at once.
- ✓ISO 9001:2015
- ✓PED 2014/68/EU
- ✓NORSOK Certified Material
- ✓ASTM B348 Certified
- ✓NACE MR0175
UNS N56400 Spring Washer Supplier in India With DIN Sizes
Specification Of Titanium Grade 5 Washers
Titanium Gr.5 Washer Packaging
- Poly Bagged Per 100 Pcs
- Wooden Pallet Boxes
- Vacuum Pack (export)
- Carton With Silica Gel
Titanium Grade 5 Washer Material Grade
- UNS R56400
- WNR 3.7165
- Ti6Al4V / Grade 5
- ASTM B348 / B381
Titanium Gr.5 Washer Surface Finish
- Pickled & Passivated
- Bright Machined Finish
- Anodised (on request)
- Natural Mill Finish
UNS R56400 Washer Origin
- Indian Origin
- US Origin
- European Origin
- Traceable To Heat Number
Titanium 3.7165 Washer Size Range
- Bore: M6 – M36
- OD: 12.5mm – 66mm
- Thickness: 1.6mm – 5mm
- Custom bore on drawing
Titanium Grade 5 Washer Testing Offered
- PMI Testing
- Hardness Test
- Dye Penetrant (DPT)
- Third-Party Inspection
Ti Alloy Grade 5 Washer Production Route
- Precision Blanking / Punching
- Solution Annealing
- CNC Edge Machining
- Pickling & Passivation
Gr.5 Titanium Washer Documentation
- Mill Test Certificate 3.1
- Material Traceability Report
- Packing List
- Certificate Of Origin
Titanium Grade 5 Washer Governing Standard
- ASTM B348 / B381
- DIN 125 / DIN 127
- ASME B18.22.1
- AMS 4928 (reference)
Offer Titanium Alloy Gr.5 Tab Washer and DIN 3.7165 Taper Washers With Quick Delivery and PED Approved Certification
Titanium Gr.5 Washer Dimension Chart
| Nominal Size | Bore Dia (mm) | Outer Dia (mm) | Thickness (mm) |
|---|---|---|---|
| M6 | 6.4 | 12.5 | 1.6 |
| M8 | 8.4 | 16.0 | 1.6 |
| M10 | 10.5 | 20.0 | 2.0 |
| M12 | 13.0 | 24.0 | 2.5 |
| M16 | 17.0 | 30.0 | 3.0 |
| M20 | 21.0 | 37.0 | 3.0 |
| M24 | 25.0 | 44.0 | 4.0 |
| M30 | 31.0 | 56.0 | 4.0 |
| M36 | 37.0 | 66.0 | 5.0 |
Types Of Titanium Grade 5 Washers
Titanium Gr.5 Plain Washer
DIN 125
Titanium Grade 5 Star Washer
Internal / External Tooth
UNS R56400 Lock Washer
DIN 127
Titanium Grade 5 Spring Washer
DIN 128
Titanium Gr.5 Square Washer
Beam Type
Titanium Grade 5 Conical Washer
DIN 6796
Titanium Grade 5 Split Washer
Helical Type
Titanium Grade 5 Spherical Washer
Self-Aligning
Application Of Titanium Alloy Gr.5 Washers
As a Titanium Grade 5 Washers manufacturer in India, Ganpat Industrial ships this alloy into weight-critical and corrosion-critical joints across nine core industries.
Aerospace Airframe Fasteners
Marine Propeller & Shaft Joints
Offshore Oil & Gas Skids
Medical & Surgical Implants
Motorsport Chassis & Suspension
Chemical Process Piping Flanges
Seawater Desalination Plants
Sports & Precision Instruments
Need Titanium Grade 5 Washers On A Fixed Delivery Date?Share your size list and get factory pricing with MTC 3.1, dispatched the same week.
Titanium Grade 5 Washers Price Factors
Send us your size-wise quantity list and we revert with per-piece pricing within 24 hours, GST and HSN details included on the quotation itself.
Titanium Grade 5 Washers Are Delivered Monthly to the Following Countries
| Export to | Countries | Continent | Ports | Shipping Time |
|---|---|---|---|---|
| Bahrain | Asia | Mina Salman | 9 Days | |
| Algeria | Africa | Jijel | 45 Days |
Titanium Gr.5 Washers vs Stainless Steel 316 Washers
Titanium Grade 5 Washers
- Density 4.43 g/cm³ — nearly half the weight of steel
- Excellent resistance to seawater & chlorides
- Non-magnetic, non-sparking under load
- Higher tensile-to-weight ratio for aerospace duty
- Higher material cost than SS316
Stainless Steel 316 Washers
- Density 8.0 g/cm³ — heavier bolted assembly
- Good but not superior chloride resistance
- Slightly magnetic in cold-worked condition
- Lower tensile-to-weight ratio
- Lower material cost, widely stocked
Sourcing In Bulk For Your Project?Share your BOQ and get factory pricing with MTC 3.1, dispatched the same week.
HSN Code Titanium Gr.5 Washers
HSN Code
8108.90
Articles of titanium, not elsewhere specified
GST Rate
18%
Applicable on domestic supply within India
Export Scheme
LUT / IGST
Zero-rated export under Letter of Undertaking
Incoterms Offered
EXW / FOB / CIF
Confirmed on the commercial invoice
Titanium Grade 5 Washer Weight Chart
Titanium Grade 5 Washers supplier in India delivering precision-engineered products with unmatched durability and robust construction.
| Nominal Size | OD (mm) | Thickness (mm) | Approx Weight (g/pc) |
|---|---|---|---|
| M6 | 12.5 | 1.6 | 0.57 |
| M8 | 16.0 | 1.6 | 1.03 |
| M10 | 20.0 | 2.0 | 2.02 |
| M12 | 24.0 | 2.5 | 3.54 |
| M16 | 30.0 | 3.0 | 6.38 |
| M20 | 37.0 | 3.0 | 9.69 |
| M24 | 44.0 | 4.0 | 18.25 |
| M30 | 56.0 | 4.0 | 30.27 |
| M36 | 66.0 | 5.0 | 51.97 |
How Titanium Gr.5 Washers Are Manufactured ?
Heat Verification
Incoming Ti6Al4V coil checked against ASTM B348 chemistry
Precision Blanking
CNC punching holds bore and OD tolerance on every piece
Solution Annealing
Controlled furnace cycle stabilises grain structure
Pickling & Passivation
Surface oxide removed for a clean, bright finish
Final Inspection
Dimensional, PMI & visual clearance before packing
Hardness Level Of Grade 5 Ti Alloy Washer
Rockwell C
32 – 36 HRC
Standard shop-floor hardness check
Brinell
300 – 340 HB
Bulk hardness on annealed surface
Vickers
320 – 360 HV
Precision micro-hardness reading
Titanium Grade 5 Washers Are Dispatched Weekly to Below Countries
| Export to | Countries | Continent | Ports | Shipping Time |
|---|---|---|---|---|
| USA | North America | Savannah | 40–60 Days | |
| Italy | Europe | Gioia Tauro | 30 Days | |
| UAE | Asia | Fujairah | 5 Days |
Material Equivalent Of Titanium 3.7165 Washer
ASTM / ASME / UNS
- ASTM B348 / B381 / B265
- UNS R56400
- ASME SB348
DIN / EN / WNR
- Werkstoff Nr. 3.7165
- DIN 17851
- TiAl6V4
GB (China)
- TC4
- GB/T 3620.1
- Ti-6Al-4V (local trade ref)
IS (India Reference)
- IS 2016 (dimensional ref)
- Import Std: ASTM B348
- Sourced On Drawing
JIS (Japan)
- JIS 60 Class Titanium
- JIS H4600 (ref group)
- Ti-6Al-4V Import Grade
Trade Names
- Ti6Al4V
- Ti64 / TC4
- Titanium Grade 5 Washer
UNS R56400 Washer Chemical Composition
TitaniumTi
Balance
AluminiumAl
5.50–6.75%
VanadiumV
3.50–4.50%
IronFe
≤ 0.30%
OxygenO
≤ 0.20%
CarbonC
≤ 0.08%
NitrogenN
≤ 0.05%
HydrogenH
≤ 0.015%
Mechanical Properties Of Ti Alloy Grade 5 Washers
Titanium Grade 5 Washers Supplier in India delivering fastener-grade strength with the corrosion life of an exotic alloy.
Tensile Strength
≥ 895 MPa
High Load
Yield Strength (0.2%)
≥ 828 MPa
Design Limit
Elongation
≥ 10%
Ductility
Density
4.43 g/cm³
Lightweight Grade
Titanium Alloy Gr.5 Washer Packaging
Custom Labelling
PO number, size & heat number marked per buyer requirement
Export Vacuum Pack
Moisture-sealed for long-transit sea freight & humid climates
Poly Bagged By Count
100 / 500 pcs per bag with size tag fitted before packing
Wooden Pallet Box
For bulk quantities & container-load shipments
Titanium Grade 5 Washers Frequently Asked Questions
What is the UNS number for Titanium Grade 5 Washers?
Titanium Grade 5 Washers carry UNS R56400, also referenced as DIN Werkstoff Nr. 3.7165 and ASTM Grade 5 (Ti6Al4V).
Which standard governs Titanium Grade 5 Washer dimensions?
Bore, outer diameter and thickness follow ASME B18.22.1 and DIN 125 / DIN 6796, matching bolt sizes from M6 up to M36.
Are Titanium Grade 5 Washers magnetic?
No. Titanium Grade 5 is non-magnetic and non-sparking, suiting MRI equipment, offshore hazardous zones and sensitive instrumentation joints.
What is the maximum operating temperature of a Titanium Grade 5 Washer?
Ti6Al4V washers hold mechanical strength up to 400°C continuous duty, with short excursions tolerated to 480°C in non-critical joints.
Do you supply Titanium Grade 5 Washers with test certificates?
Yes, every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate, with 3.2 third-party certification available on request.
We Collaborate With Traders in the Following Countries
| USA | Kenya | Algeria | Tanzania | Angola |
| Saudi Arabia | Oman | UAE | South Africa | Nigeria |
| New South Wales | Egypt | Mozambique | – | Tunisia |
| Ethiopia | Ghana | Zambia | Morocco | Gabon |
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA