Reasons Businesses Choose Ganpat Industrial As Their Titanium Gr 2 Angle Supplier
Mill-Certified CP Titanium
Every angle traced to an ASTM B348 heat certificate
One Enquiry, Full Profile
Equal • unequal • slotted • punched angle in one PO
Built For Chlorides & Acids
Passivated surface resists seawater and process acids
Inspected Before Dispatch
PMI • dimensional • visual check on every lot
Quote In 24 Hours
Ready stock on standard leg sizes — ships same week
Titanium Gr 2 Angle Overview
- 1Type: Equal Leg, Unequal Leg, Slotted, Punched, Machined Angle
- 2Size Range: 20 × 20 mm to 200 × 200 mm • thickness 3–16 mm
- 3Grade: ASTM B348 Grade 2, UNS R50400, Werkstoff Nr. 3.7035
- 4Finish: Pickled & Annealed, Mill Finish, Polished, Sand Blasted
- 5Standards: ASME SB348, ASTM F67, AMS 4901, ISO 5832-2
- 6Origin: Indian Origin • US Origin • European Origin
Titanium Gr 2 Angle is unalloyed, commercially pure titanium. It carries roughly 99% titanium content. Ganpat Industrial rolls and machines every ASTM B348 angle from mill-certified billet, then cuts equal, unequal or slotted profiles to your drawing. Buyers in desalination, chemical processing, marine hardware and aerospace bracket work pick Grade 2 over stainless steel because chlorides and acids that pit 316L simply do not touch titanium’s oxide layer. Ganpat Industrial Corporation is a Mumbai-based manufacturer and exporter with over 25 years in titanium and stainless products, shipping ready stock and custom-drawing orders across India, the UAE, Europe and the Americas.
Mumbai · Titanium Gr 2 Angle Manufacturer India
Titanium Grade 2 Angle Built To Outlast Chlorides, Acids And Marine Air
Ganpat Industrial forges and supplies ASTM B348 / UNS R50400 Angles for buyers running desalination plants, chemical processing units, marine decks and aerospace brackets across India, the UAE and the Middle East.
- ✓ISO 9001:2015
- ✓ISO 14001:2015
- ✓PED Certified
- ✓NACE MR0175
- ✓Petrofac Approved
MTC Certified ASTM B348 Titanium Grade 2 U Channel Manufacturer in India, Refer Specification
Titanium Gr 2 Angle Specification
ASTM B348 Titanium Alloy Grade 2 W Beams Material
- UNS R50400
- Werkstoff Nr. 3.7035
- ASTM B348
- ASME SB348
Titanium UNS R50400 Grade 2 C Channel Testing
- PMI Testing
- Hydrostatic Test
- Dimensional Check
- Third-Party Inspection
ASTM B348 Titanium Grade 2 Equal Leg Angle Origin
- Indian Origin
- US Origin
- European Origin
- Traceable To Heat Number
Grade 2 Ti. Alloy I Beam Size Range
- Leg: 20 – 200 mm
- Thickness: 3 – 16 mm
- Length: up to 6 m
- Custom sizes on drawing
Titanium WERKSTOFF NR.3.7035 U Channel Documentation
- Mill Test Certificate 3.1
- NABL Lab Report
- Packing List
- Certificate Of Origin
Hot Rolled Steel Grade 2 Angle Bar Surface Finish
- Pickled & Annealed
- Mill Finish
- Polished
- Sand Blasted
Titanium Grade 2 T Beam W Beams Production Route
- Hot Rolled
- CNC Machined From Plate
- Extruded
- Deburred & Straightened
Grade 2 Titanium Alloy C Channel Governing Standard
- ASTM B348
- ASME SB348
- AMS 4901
- ASTM F67
Titanium Grade 2 Equal Leg Angle Type
- Equal Leg
- Unequal Leg
- Slotted
- Punched On Drawing
Need A Custom Titanium Angle Length Or Leg Size?Send your specification sheet and receive a mill-direct rate within a day.
Titanium Gr 2 W Beams Size Chart
We keep standard sizes in stock daily as a trusted Titanium Gr 2 Angle Supplier in India.
| Nominal Size (mm) | Thickness Range (mm) | Standard Length (m) | Angle Type |
|---|---|---|---|
| 20 × 20 | 3 – 4 | 1 – 6 | Equal |
| 25 × 25 | 3 – 5 | 1 – 6 | Equal |
| 30 × 30 | 3 – 5 | 1 – 6 | Equal |
| 40 × 40 | 4 – 6 | 1 – 6 | Equal |
| 50 × 50 | 5 – 8 | 1 – 6 | Equal |
| 65 × 65 | 6 – 8 | 1 – 6 | Equal |
| 75 × 75 | 6 – 10 | 1 – 6 | Equal |
| 100 × 100 | 8 – 12 | 1 – 6 | Equal |
| 125 × 125 | 10 – 12 | 1 – 6 | Equal |
| 150 × 150 | 10 – 16 | 1 – 6 | Equal |
| 200 × 200 | 12 – 16 | 1 – 6 | Equal |
Types Of Titanium Gr 2 Angle
ASTM B348 Titanium Alloy Grade 2 Equal Leg Angle
ASTM B348
Titanium UNS R50400 Grade 2 Unequal Leg Angle
On Drawing
ASTM B348 Titanium Grade 2 Slotted Angle
Rack & Shelving
Titanium WERKSTOFF NR.3.7035 Angle Bracket
Support Clip
Hot Rolled Steel Grade 2 T-Angle Profile
Structural
Grade 2 Titanium Alloy Mirror Polish Angle
Architectural
Grade 2 Ti. Alloy Punched Angle
Bolt-Ready
ASTM B348 Titanium Alloy Grade 2 C Channel Weight Chart
Theoretical weight at titanium density 4.51 g/cm³
| Size (mm) | Thickness (mm) | Weight (kg/m) |
|---|---|---|
| 20 × 20 | 3 | 0.50 |
| 25 × 25 | 3 | 0.64 |
| 30 × 30 | 4 | 1.01 |
| 40 × 40 | 4 | 1.37 |
| 50 × 50 | 5 | 2.14 |
| 65 × 65 | 6 | 3.36 |
| 75 × 75 | 6 | 3.90 |
| 100 × 100 | 8 | 6.93 |
| 125 × 125 | 10 | 10.82 |
| 150 × 150 | 12 | 15.59 |
| 200 × 200 | 16 | 27.71 |
Ordering Titanium Angle By The Tonne?Share your bulk requirement and get a container-load export rate.
Titanium UNS R50400 Grade 2 Equal Leg Angle Application Guide
These industries trust us as a leading Titanium Gr 2 Angle Supplier in India.
Resists seawater corrosion.
Handles harsh chemical exposure.
Built for constant marine exposure.
Light, high strength-to-weight.
Corrosion-free, low maintenance.
Strong, lightweight support.
Resists acidic gas corrosion.
Pure, non-reactive material.
ASTM B348 Titanium Grade 2 I Beam Pressure Rating
Load capacity is set by section size, temperature and design code
Continuous Service
315°C
600°F Max
Tensile Basis
345 MPa
Min UTS
Melting Point
1660°C
3020°F
Design Code
ASME
B31.3 / Sec VIII
Grade 2 Ti. Alloy U Channel Schedule Chart
Light Series
3 – 4 mm
0.50 – 1.37 kg/m • brackets & clips
Medium Series
5 – 6 mm
1.37 – 3.90 kg/m • frames & supports
Heavy Series
8 – 10 mm
6.93 – 10.82 kg/m • skid & base frames
Extra Heavy Series
12 – 16 mm
15.59 – 27.71 kg/m • structural duty
Need Mill Test Certificate 3.1 With Your Order?Complete heat-to-batch traceability accompanies every consignment.
Titanium WERKSTOFF NR.3.7035 Angle Bar Chemical Composition
Hot Rolled Steel Grade 2 W Beams Mechanical Properties
Tensile Strength
345 MPa
Min • 50 ksi
Yield Strength
275 MPa
Min • 0.2% Proof
Elongation
20%
Min • 50mm Gauge
Density
4.51 g/cm³
~55% Of Steel
Titanium Grade 2 T Beam C Channel Material Equivalent Chart
USA
- ASTM B348 Grade 2
- UNS R50400
- AMS 4901
Germany
- DIN / Werkstoff Nr. 3.7035
- EN 10204-3.1
Russia
- GOST BT1-0
United Kingdom
- BS 25-35 t/in²
Japan
- JIS Class 2
China
- GB/T TA2
Grade 2 Titanium Alloy Equal Leg Angle Price & HSN Code
HSN Code
8108 90 00
Titanium and articles thereof
GST Rate
18%
Standard rate on titanium articles
Price Basis
Per Kg
Tracks LME titanium sponge index
Lead Time
24 Hrs
Quote turnaround on stock sizes
Get Today’s Titanium Angle PriceShare size, thickness and quantity for a factory rate.
Titanium Grade 2 I Beam Corrosion Resistance
Every profile is tested against real media by our Titanium Gr 2 Angle Manufacturer in India team.
Seawater & Chlorides — Excellent
Nitric Acid (Any Conc.) — Excellent
Atmospheric & Industrial Air — Excellent
Oxidizing Salts — Excellent
Alkalis & Caustic Soda — Good
Dilute Sulphuric Acid — Good
Concentrated Reducing Acids — Limited
Hydrochloric Acid — Not Recommended
Grade 2 Titanium U Channel Packaging & Export
Wooden Crating
Seaworthy crates lined with a waterproof barrier
Bundle Strapping
PP or steel strap bundles for angle lengths
End Capping
Plastic end caps protect edges in transit
Heat-Number Marking
Grade, size and heat number stenciled per ASTM
Container Loading
LCL and FCL loading with dunnage support
Working In A Chloride Or Acid Duty Environment?Describe your process fluid and we verify grade fit at no charge.
Titanium Gr 2 Angle Bar Vs Titanium Gr 5 Angle
Choose By Load Duty, Not By Habit
Titanium Gr 2 Angle
- Density: ≈ 4.51 g/cm³
- Tensile Strength: ≥ 345 MPa
- Yield Strength: ≥ 275 MPa
- Weldability: Excellent
- Relative Cost Index: 1.0x (Base)
Titanium Gr 5 Angle
- Density: ≈ 4.43 g/cm³
- Tensile Strength: ≥ 895 MPa
- Yield Strength: ≥ 828 MPa
- Weldability: Good
- Relative Cost Index: 1.6x–2.0x
Frequently Asked Questions
Is Grade 2 Titanium I Beam magnetic?
No. Grade 2 is non-magnetic alpha-phase titanium.
Can Titanium Gr 2 U Channel be welded?
Yes, using TIG or plasma welding under inert argon shielding.
What is the HSN code for ASTM B348 Titanium Alloy Grade 2 Angle Bar?
8108 90 00, taxed at 18% GST in India.
What is the minimum order quantity?
Ganpat Industrial supplies from small trial lots to full container loads.
What is the maximum stock length?
Up to 6 metres, cut-to-size on drawing available.
Is Titanium UNS R50400 Grade 2 W Beams resistant to seawater?
Yes, it offers excellent resistance to seawater and chlorides.
Should I choose Gr 2 or Gr 5 Equal Leg Angle?
Gr 2 suits corrosion duty; Gr 5 suits high-strength structural loads.
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA