Titanium Grade 5 Angle Buyers Rely On Ganpat Industrial
Aerospace-Grade Ti-6Al-4V
Every angle traced to a VAR/EB melted heat certified to ASTM B348 Grade 5
Equal andUnequal, One PO
Rolled, extruded, machined or drawing-cut angle – consolidated on a single order
ISO 9001:2015 Certified
PED andNABL-backed quality system, MTC 3.1 on every dispatch
PMI andUT Checked
Positive material identification andultrasonic scan before it ships
Quote Inside 24 Hours
Standard sizes ex-stock, custom drawing sizes on fast production
Titanium Grade 5 Angle Overview
- 1Alloy: Ti-6Al-4V • UNS R56400 • Werkstoff Nr. 3.7165
- 2Form: Equal Leg andUnequal Leg Angle, L-Section
- 3Size Range: 20x20x3 mm to 150x150x15 mm • custom on drawing
- 4Governing Standard: ASTM B348 chemistry andmechanicals
- 5Condition: Mill Annealed • Solution Treated andAged on request
- 6Strength-To-Weight: 43% lighter than steel at comparable strength
Or call our Mumbai office: +91 22 6743 7134 • Same-week dispatch on ex-stock sizes
Titanium Grade 5 Angles use strong L shaped sections. This Ti-6Al-4V alloy provides very high yield strength. It is 43 percent lighter than steel angles. Ganpat Industrial sources high quality vacuum melted stock. They machine equal andunequal leg angle sections. Every product meets strict ASTM B348 material standards. Aircraft builders use these angles for airframe brackets. Marine engineers specify them for durable deck fittings. Motorsport teams build chassis gussets using this grade. Chemical plants use them where mild steel corrodes. Ganpat Industrial has over 25 years experience. They export non ferrous sections to Middle East.
Mumbai · Titanium Grade 5 Angle Manufacturer India
Ti-6Al-4V Angle Sections Built For The Loads Where Steel Rusts AndAluminium Bends
Ganpat Industrial machines andsupplies UNS R56400 / ASTM B348 Grade 5 Equal andUnequal Angle for aerospace brackets, marine hardware, motorsport frames andchemical-process supports across India, the UAE andthe Middle East.
- ✓ISO 9001:2015
- ✓ISO 14001:2015
- ✓AS9100 On Request
- ✓PED Certified
- ✓MTC 3.1 Traceable
Corrosion-Resistant ASTM B348 Ti. Alloy Grade 5 Channel Manufacturer in India with MTC
Titanium Grade 5 Angle Specification
Titanium Werkstoff Nr. 3.7165 U Channel
- UNS R56400
- Werkstoff Nr. 3.7165
- Ti-6Al-4V
- ASTM B348 Chemistry
ASTM B348 Titanium Alloy Grade 5 T Beam
- Tensile Strength: 895 MPa Min.
- Yield Strength: 828 MPa Min.
- Elongation: 10% Min.
- Hardness: 36 HRC Approx.
Titanium UNS R56400 Grade 5 T Beam
- PMI Testing
- Ultrasonic Testing
- Dimensional Check
- Third-Party Inspection
Grade 5 Titanium C Channel
- Indian Origin
- European Origin
- US Origin
- Traceable To Heat Number
ASTM B348 Titanium Grade 5 Equal Leg Angle
- Leg: 20 – 150 mm
- Thickness: 3 – 15 mm
- Length: 1 – 6 m
- Custom sizes on drawing
Titanium Grade 5 W Beams
- Mill Test Certificate 3.1
- NABL Lab Report
- Packing List
- Certificate Of Origin
Grade 5 Ti. Alloy C Channel
- Mill / As-Rolled
- Machined Finish
- Pickled andPassivated
- Polished On Request
Grade 5 Titanium Alloy U Channel
- Hot Rolling
- Extrusion
- CNC Machining From Bar/Plate
- Press-Braking (Thin Gauge)
Titanium Gr 5 Equal Leg Angle
- ASTM B348
- AMS 4928 / AMS 4911
- ASME B6.1 Tolerance
- Buyer Drawing / GDandT
Corrosion Resistance Of Titanium Grade 5 Angle – Hot Rolled Steel Grade 5 I Beam
A tenacious, self-healing titanium-oxide film gives Titanium Gr 5 Angle its corrosion profile across common industrial exposures
Excellent – Seawater andBrine
Excellent – Chlorides andWet Chlorine Gas
Good – Oxidizing Acids (Nitric)
Avoid – Hydrofluoric Acid
Avoid – Red Fuming Nitric Acid
Good – Marine Atmosphere
Good – Sour / H₂S Service
Excellent – Pitting andCrevice Resistance
Looking For A Non-Standard Titanium Angle Size?Send us your drawing – receive a factory-price quote inside 24 hours.
Buy Grade 5 Ti. Alloy Anchor Chain in Custom Sizes with MTC for Aerospace & Industrial Use
Application Of Grade 5 Titanium Angle – Grade 5 Titanium Alloy I Beam
As a well-known Titanium Grade 5 Angle manufacturer in India, our sections perform reliably in every load-bearing application below
Aircraft andAirframe Brackets
Marine andOffshore Deck Fittings
Chemical andPetrochemical Supports
Motorsport andRace Chassis Gussets
Medical andDental Equipment Frames
Seawater Desalination Plant Framing
Defence andArmour Mounting Brackets
Sports Equipment andFrame Gussets
ASTM B348 Ti-6Al-4V Angle Size Chart – ASTM B348 Titanium Grade 5 Equal Leg Angle
As a trusted Titanium Grade 5 Angle supplier in India, we hold leg length, thickness andangularity within tight, drawing-matched tolerance on every size below
| Leg A x Leg B (mm) | Thickness (mm) | Leg Tolerance | Thickness Tolerance | Std. Length |
|---|---|---|---|---|
| 20 x 20 | 3 | ±0.40 mm | ±0.15 mm | 1 / 2 / 3 m |
| 25 x 25 | 3 | ±0.40 mm | ±0.15 mm | 1 / 2 / 3 m |
| 30 x 30 | 4 | ±0.40 mm | ±0.20 mm | 2 / 3 m |
| 35 x 35 | 4 | ±0.40 mm | ±0.20 mm | 2 / 3 / 6 m |
| 40 x 40 | 4 | ±0.50 mm | ±0.20 mm | 2 / 3 / 6 m |
| 45 x 45 | 5 | ±0.50 mm | ±0.20 mm | 2 / 3 / 6 m |
| 50 x 50 | 5 | ±0.50 mm | ±0.25 mm | 2 / 3 / 6 m |
| 55 x 55 | 6 | ±0.60 mm | ±0.25 mm | 3 / 6 m |
| 60 x 60 | 6 | ±0.60 mm | ±0.25 mm | 3 / 6 m |
| 65 x 65 | 6 | ±0.60 mm | ±0.25 mm | 3 / 6 m |
| 70 x 70 | 7 | ±0.70 mm | ±0.30 mm | 3 / 6 m |
| 75 x 75 | 8 | ±0.80 mm | ±0.30 mm | 3 / 6 m |
| 80 x 80 | 8 | ±0.80 mm | ±0.30 mm | 3 / 6 m |
| 90 x 90 | 9 | ±0.80 mm | ±0.35 mm | 3 / 6 m |
| 100 x 100 | 10 | ±0.80 mm | ±0.35 mm | 3 / 6 m |
| 110 x 110 | 10 | ±0.90 mm | ±0.35 mm | 3 / 6 m |
| 125 x 125 | 12 | ±1.00 mm | ±0.40 mm | 3 / 6 m |
| 140 x 140 | 13 | ±1.00 mm | ±0.40 mm | 3 / 6 m |
| 150 x 150 | 15 | ±1.00 mm | ±0.40 mm | 3 / 6 m |
Types Of Titanium Grade 5 Angle
Titanium Gr 5 Equal Leg Angle
Both Legs Equal
Grade 5 Ti. Alloy CNC Machined Angle
Precision Cut
Grade 5 Titanium Alloy Polished Angle
Mirror / Satin
Titanium Werkstoff Nr. 3.7165 Perforated Angle
Pre-Drilled
Grade 5 Titanium Slotted Angle
Slotted Rack
ASTM B348 Titanium Alloy Grade 5 Angle Bracket
Cut / Notched
Weighing Up Different Titanium Angle Grades?Describe the load andenvironment – we’ll suggest the right grade andfinish.
Titanium Gr 5 Equal Angle Weight Chart – Titanium Gr 5 W Beams
Calculated at 4.43 g/cm³ density – approximate ±5% against actual root-radius section
| Size (mm) | Thickness (mm) | Kg / Meter | Kg / Foot | Kg Per 3 m Bar | Kg Per 6 m Bar |
|---|---|---|---|---|---|
| 20 x 20 | 3 | 0.49 | 0.15 | 1.48 | 2.95 |
| 25 x 25 | 3 | 0.63 | 0.19 | 1.88 | 3.75 |
| 30 x 30 | 4 | 0.99 | 0.30 | 2.98 | 5.95 |
| 35 x 35 | 4 | 1.17 | 0.36 | 3.51 | 7.02 |
| 40 x 40 | 4 | 1.35 | 0.41 | 4.04 | 8.08 |
| 45 x 45 | 5 | 1.88 | 0.57 | 5.64 | 11.29 |
| 50 x 50 | 5 | 2.10 | 0.64 | 6.31 | 12.62 |
| 55 x 55 | 6 | 2.76 | 0.84 | 8.29 | 16.59 |
| 60 x 60 | 6 | 3.03 | 0.92 | 9.09 | 18.18 |
| 65 x 65 | 6 | 3.30 | 1.01 | 9.89 | 19.78 |
| 70 x 70 | 7 | 4.12 | 1.26 | 12.37 | 24.74 |
| 75 x 75 | 8 | 5.03 | 1.53 | 15.10 | 30.20 |
| 80 x 80 | 8 | 5.39 | 1.64 | 16.16 | 32.32 |
| 90 x 90 | 9 | 6.82 | 2.08 | 20.45 | 40.91 |
| 100 x 100 | 10 | 8.42 | 2.57 | 25.25 | 50.50 |
| 110 x 110 | 10 | 9.30 | 2.84 | 27.91 | 55.82 |
| 125 x 125 | 12 | 12.65 | 3.86 | 37.96 | 75.91 |
| 140 x 140 | 13 | 15.38 | 4.69 | 46.13 | 92.26 |
| 150 x 150 | 15 | 18.94 | 5.77 | 56.81 | 113.63 |
What Actually Moves The Price
◆Order Quantity
◆Condition (Annealed / STA)
◆Finish andTesting
Get a live Titanium Grade 5 Angle quote todayFactory price on standard sizes, drawing-based pricing on custom sections, no minimum-order penalty for repeat buyers.
Titanium Gr 5 Angle Pressure andDesign Stress Rating – Titanium UNS R56400 Grade 5 T Beam
Indicative Allowable Design Stress – ASME B31.3 Basic Method
Room Temp (Approx)
≈ 298 MPa
Governs: UTS/3
At 100°C (Typical)
≈ 270 MPa
~90% Retained
At 200°C (Typical)
≈ 235 MPa
~79% Retained
At 300°C (Typical)
≈ 205 MPa
~69% Retained
Titanium Gr 5 Angle Thickness Schedule Chart – Grade 5 Ti. Alloy C Channel
Angle sections are grouped into a leg-thickness schedule so buyers can specify duty class without redrawing every dimension
Light Schedule
3 – 4 mm
Brackets, panel frames, light fixtures
Medium Schedule
5 – 6 mm
Chassis gussets, marine fittings
Heavy Schedule
8 – 10 mm
Structural supports, mounting frames
Extra-Heavy Schedule
12 – 15 mm
Heavy-duty offshore anddefence brackets
UNS R56400 Angle Chemical Composition – Titanium Werkstoff Nr. 3.7165 U Channel
Per ASTM B348 Grade 5 (Ti-6Al-4V)
Aluminium (Al)
5.50-6.75%
Vanadium (V)
3.50-4.50%
Iron (Fe)
≤ 0.40%
Oxygen (O)
≤ 0.20%
Carbon (C)
≤ 0.08%
Nitrogen (N)
≤ 0.05%
Hydrogen (H)
≤ 0.015%
Yttrium (Y)
≤ 0.005%
Titanium (Ti)
Balance
ASTM B348 Grade 5 Angle Mechanical Properties – ASTM B348 Titanium Alloy Grade 5 T Beam
Mill Annealed Condition
Tensile Strength
895 MPa Min
130 ksi
Yield Strength (0.2%)
828 MPa Min
120 ksi
Elongation (In 4D)
10% Min
Typical 18%
Reduction Of Area
25% Min
Ductility
Elastic Modulus
114 GPa
Typical
Hardness
36 HRC Typ.
Wear Resistance
Density
4.43 g/cm³
43% lighter than mild steel
Melting Range
1604-1660°C
Alpha-beta solidus/liquidus band
Max Service Temp
~400°C
Continuous structural duty
Weldability
Fair – Good
Inert gas shielded (TIG/EB) preferred
Want Mill Test Certificates Tied To Your Drawing?Share your BOQ with us – factory pricing, MTC 3.1 andsame-week dispatch.
Titanium Grade 5 Angle Equivalent Grades – Grade 5 Titanium C Channel
Matching every global equivalent correctly is why buyers trust us as a Titanium Gr 5 Angle Supplier in India.
ASTM / UNS / AMS
- ASTM B348 Grade 5
- UNS R56400
- AMS 4928 (Bar)
- AMS 4911 (Sheet/Plate)
DIN / Werkstoff
- Werkstoff Nr. 3.7165
- DIN / EN Ti-6Al-4V
- X5AlV6-4
BS
- BS TA10
- BS TA11
- BS 2TA.13
ISO
- ISO 5832-3
- Wrought Ti-6Al-4V
- Surgical Implant Grade
JIS
- JIS H4600 Class 60
- Ti-6Al-4V Equivalent
IS
- Chemistry andMechanicals Per ASTM B348
- Supplied Against Buyer Drawing
Titanium Grades Available Alongside Grade 5 Angle – Ti-6Al-4V Grade 5 L Beam
One Supplier, Every Titanium Grade Your Drawing Calls For
Titanium Grade 1 Angle
- UNS R50250
- Unalloyed (CP Ti)
- Most Ductile CP Grade
- Best Cold Formability
Titanium Grade 2 Angle
- UNS R50400
- Unalloyed (CP Ti)
- General Purpose Workhorse
- Excellent Weldability
Titanium Grade 3 Angle
- UNS R50550
- Unalloyed (CP Ti)
- Higher Strength Than Gr 2
- Moderate Formability
Titanium Grade 4 Angle
- UNS R50700
- Unalloyed (CP Ti)
- Highest-Strength CP Grade
- Surgical / Marine Use
Titanium Grade 5 Angle
- UNS R56400 • Ti-6Al-4V
- Alpha-Beta Alloy
- Highest Strength-To-Weight
- Featured On This Page
Titanium Grade 7 Angle
- UNS R52400
- Ti-0.2Pd
- Superior Crevice Resistance
- Grade 2 Plus Palladium
Titanium Grade 9 Angle
- UNS R56320
- Ti-3Al-2.5V
- Mid-Strength Alpha-Beta
- Good Weld / Form Balance
Titanium Grade 11 Angle
- UNS R52250
- Ti-0.2Pd
- Grade 1 Plus Palladium
- Low-Interstitial, Ductile
Titanium Grade 12 Angle
- UNS R53400
- Ti-0.3Mo-0.8Ni
- Steel-Like Strength
- Crevice-Resistant Alternative
Titanium Grade 23 Angle
- UNS R56407
- Ti-6Al-4V ELI
- Extra Low Interstitial
- Aerospace / Medical Grade
Titanium Grade 5 Angle Price List andHSN Code – Titanium Grade 5 W Beams
The single question every buyer asks first – here is exactly how a Titanium Grade 5 Angle is priced andclassified for import/export
HSN Heading
8108
Titanium andarticles thereof
HSN Sub-Heading
8108 90
Other titanium articles (bars, angles, shapes)
GST Rate
18%
Standard rate on titanium articles in India
Price Basis
Per Kg
Quoted against size, quantity andfinish
What Sets The Final Price Per Kg
Size andThickness
Larger, thicker angle costs more per kg to machine
Condition
Solution treated andaged (STA) costs above mill-annealed
Order Quantity
Bulk drawing orders bring the per-kg rate down
Testing andCertification
PMI, UT andthird-party inspection add to the base rate
Titanium Grade 5 vs Titanium Grade 2 Angle – Titanium Gr 5 Equal Leg Angle
Choose By Load, Not By Habit
Titanium Grade 2 Angle
- UNS R50400 • Unalloyed (CP Ti)
- Tensile Strength: ≥ 345 MPa
- Yield Strength: ≥ 275 MPa
- Density: ≈ 4.51 g/cm³
- Weldability: Excellent
Titanium Grade 5 Angle
- UNS R56400 • Alpha-Beta Alloy
- Tensile Strength: ≥ 895 MPa
- Yield Strength: ≥ 828 MPa
- Density: ≈ 4.43 g/cm³
- Weldability: Fair – Good
Unsure Which Titanium Grade Suits Your Application?Give us the load, environment andbudget – we’ll point you to the right grade.
Titanium Grade 5 Angle Manufacturing Process – Grade 5 Titanium Alloy U Channel
Strict control at each production step makes us a dependable Titanium Gr 5 Angle Supplier in India.
VAR / EB Melting
Sponge andalloy melted twice for a homogeneous ingot
Forging To Billet
Ingot forged down into rolling-ready billet stock
Rolling / Extrusion
Billet hot-rolled or extruded into the L-angle profile
Anneal / STA
Mill annealed as standard, solution treat andage on request
CNC Machining
Length cut, drilled andfinished to buyer drawing
Test andCertify
PMI, UT anddimensional check before MTC 3.1 issue
Titanium Grade 5 Angle Export Packaging
Careful export packaging on every shipment reflects our standards as a Titanium Gr 5 Angle Manufacturer in India.
Bundle andStrap
Standard bundling for domestic andsmall trial-lot orders
Wooden Crate
For bulk quantities andlonger bar lengths
VCI Wrap
Moisture andcorrosion protection for long sea-freight transit
Custom Labelling
PO number andheat traceability tag marked per buyer requirement
Frequently Asked Questions
Is Hot Rolled Steel Grade 5 I Beam stronger than mild steel angle?
Yes – per kg it delivers a far higher strength-to-weight ratio, though standard steel angle has a lower raw tensile figure than Ti-6Al-4V.
Can Grade 5 Titanium Alloy I Beam be welded?
Yes, with inert-gas shielded TIG or electron-beam welding; oxy-fuel andstandard arc welding are not recommended.
What is the minimum order quantity for Titanium Gr 5 W Beams?
Ganpat Industrial supplies from small trial lots to full container loads – share size andquantity for a factory-price quote.
Do you supply Titanium Gr 5 Equal Leg Angle on drawing?
Yes, unequal leg combinations are machined or fabricated to your exact GDandT drawing on request.
6 Reasons to choose Ganpat Industrial Corporation
- Distributor of Heat Exchanger parts and Alloys for High Temperature applications.
- Stockholder and importer of Ferrous and non ferrous metals.
- Wide stock of prime quality austenitic and Ferritic Stainless Steel for Extreme pressure environment.
- Marine grade steel at lowest price in Mumbai.
- Compare Price per KG in India and China.
- Offer Resale price to local suppliers, traders and wholesalers in UAE, Saudi Arabia, Egypt, and USA